DigiDash

roblesterjr04·el-camino-dash·DigiDash/DigiDash.kicad_pcb

DigiDash PCB layout, top view — open source AVR/Arduino board by roblesterjr04

About the DigiDash PCB

DigiDash is an open source AVR/Arduino PCB design by roblesterjr04, published on GitHub under the MIT license. It is a 2-layer board measuring 309 × 103.5 mm, with 97 components from 65 distinct parts.

Its main chip is the ATmega328P-P, from the AVR/Arduino family. Other key parts include the TPS54560BDDAR, PC817 and TJA1051T/3/1J. By type, the board carries 31 resistors, 20 connectors, 18 capacitors, 10 fuses, 6 ICs and 3 transistors.

From the project

Status: superseded by DigiDash2/. Kept as the reference that rev 2 was planned from (docs/hardware/digidashrev2plan.md, "What rev 1 does badly"). Not on the panel. Whether it was ever ordered or built: not stated.

Status: superseded by DigiDash2/. Kept as the reference that rev 2 was planned from (docs/hardware/digidashrev2plan.md, "What rev 1 does badly"). Not on the panel. Whether it was ever ordered or built: not stated.

Firmware: the on-board sensor pack runs arduino/sketches/sensorpack; the screens run firmware/esp32p4display`.

The first main board: 309.2 × 103.7 mm, 2 layers, every part through-hole. On it: - the three screen headers (2×20) for the Waveshare ESP32-P4 round displays, with an MCP2562 CAN transceiver per screen - an ATmega328P (DIP-28) sensor pack whose serial output fans out to…

Main components on the DigiDash

DigiDash bill of materials (BOM)

97 components, 65 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATmega328P-P
U1
1
TPS54560BDDAR
LM2576T-5
Texas Instruments
U2
1
PC817
U4
3
TJA1051T/3/1J
MCP2562-E-P
NXP
U5, U9, U10
3
MMBT3904LT1G
2N3904
onsemi
Q1, Q3, Q4
1
16MHz
Y1
1
PZ254V-12-40P
Center Screen - Master
XFCN
J1
1
AVR-ISP-6
J2
1
Sensors
J3
1
PZ254V-12-40P
Right Screen
XFCN
J4
1
PZ254V-12-40P
Left Screen
XFCN
J5
1
GPS Module
JST
J6
1
43650-0615
Vehicle Power Connector
Molex
J7
1
RPM_SEL
J8
1
Backup Camera
JST
J9
1
Speed Tach Connector
J10
1
RCJ-024
RCJ-022
Same Sky
J11
1
RCJ-022
J12
1
39-28-1023
TVP5150 video module
Molex
J13
1
PRPC003SAAN-RC
CAN debug
Sullins
J16
Show 45 more
QtyPartRefs
1
Cable port 1
JST
J17
1
Accessory port 1
J18
1
Accessory port 2
J19
1
Accessory port 3
J20
1
Accessory port 4
J21
1
Cable port 2
JST
J22
1
3568
MF-R050 0.5A
Keystone
F1
7
SMD1812P050TF/30
MF-R050 0.5A
PTTC
F2, F3, F4, F5, F6, F8, F9
1
1812L110/33MR
MF-R050 0.5A
Littelfuse
F7
1
1206L010/60WR
MF-R050 0.5A
Littelfuse
F10
1
FRAM Board
FRAM1
4
Thermistor_PTC_US
TH1, TH2, TH3, TH4
1
1N5822
D1
1
NUP2105LT1G
NUP2105L
onsemi
D2
1
MS1050-6R8M
100uH 3A
COILMX
L1
1
22pF
Honor
C1
1
GRM32ER72A225KA35L
22pF
Murata
C2
1
GRM32ER72A225KA35L
1000uF 16V
Murata
C3
2
GRM32ER72A225KA35L
100nf
Murata
C4, C5
6
CL10B104KB8NNNC
100nf
Samsung
C6, C7, C21, C22, C23, C24
2
CL32A476KPJNNNE
100nf
Samsung
C8, C10
1
CL32A476KPJNNNE
100uF 35V
Samsung
C9
1
CL10B472KB8NNNC
100nF
Samsung
C11
1
CL10C470JB8NNNC
100nF
Samsung
C12
2
CL21B106KOQNNNE
100nF
Samsung
C13, C14
7
RC0603FR-0710KL
10K
Yageo
R1, R8, R11, R12, R17, R22, R26
1
RC0603FR-0753K6L
470
Yageo
R3
1
RC0603FR-0710K2L
1K
Yageo
R4
1
RC0603FR-0716K9L
1K
Yageo
R5
1
RC0603FR-07442KL
100K
Yageo
R6
1
RC0603FR-0790K9L
1K
Yageo
R7
2
RC0603FR-074K7L
10K
Yageo
R9, R20
1
RC0603FR-0722KL
1K
Yageo
R10
2
RC0603FR-071KL
10K
Yageo
R13, R14
2
RC0603FR-0710KL
4.7K
Yageo
R15, R16
1
RC0603FR-07120RL
10K
Yageo
R18
1
RC0603FR-07120RL
22K
Yageo
R19
1
RC0603FR-074K7L
22K
Yageo
R21
1
RC0603FR-0710KL
100K
Yageo
R23
3
RC0603FR-0710KL
1K
Yageo
R24, R37, R38
1
RC0603FR-0737R4L
10K
Yageo
R33
1
RC0603FR-0722RL
10K
Yageo
R34
1
RC0603FR-07100KL
120
Yageo
R35
1
RC0603FR-0710KL
120
Yageo
R36
1
R_Pack08
RN1

DigiDash design files

The KiCad project lives in the roblesterjr04/el-camino-dash repository on GitHub; these links point at the commit this page was built from.

DigiDash: common questions

What microcontroller does the DigiDash use?

The DigiDash is built around the ATmega328P-P, from the AVR/Arduino family.

How big is the DigiDash PCB?

The DigiDash measures 309 × 103.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DigiDash?

97 components, from 65 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DigiDash design files?

From the roblesterjr04/el-camino-dash repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DigiDash design in my own project?

Yes, under the terms of its MIT license, which roblesterjr04 chose for the repository.

Can I test firmware for the DigiDash without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in el-camino-dash

Similar boards