ConsoleBoard

roblesterjr04·el-camino-dash·ConsoleBoard/ConsoleBoard.kicad_pcb

ConsoleBoard PCB layout, top view — open source ESP32 board by roblesterjr04

About the ConsoleBoard PCB

ConsoleBoard is an open source ESP32 PCB design by roblesterjr04, published on GitHub under the MIT license. It is a 4-layer board measuring 100 × 50 mm, with 60 components from 28 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8, from the ESP32 family. Other key parts include the MCP2562-E/SN, AP7361C-33E and USBLC6-2SC6. By type, the board carries 19 capacitors, 19 resistors, 7 diodes, 6 connectors, 4 ICs and 4 switches.

From the project

The console's own board (CAN node 0x13): a bare ESP32-S3-WROOM-1-N8 (no dev board) with the parts it needs, a female 2 × 8 socket the 100 × 33.5 mm SSD1322 256 × 64 OLED module plugs into, Back and View keys, four yellow LEDs (to match the yellow OLED), and top-entry connectors f

The console's own board (CAN node 0x13): a bare ESP32-S3-WROOM-1-N8 (no dev board) with the parts it needs, a female 2 × 8 socket the 100 × 33.5 mm SSD1322 256 × 64 OLED module plugs into, Back and View keys, four yellow LEDs (to match the yellow OLED), and top-entry connectors for the Select and Volume encoders. One 4-wire cable goes to a DigiDash cable port.

Main components on the ConsoleBoard

ConsoleBoard bill of materials (BOM)

60 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1-N8
U1
1
MCP2562-E/SN
U2
1
AP7361C-33E
U3
1
USBLC6-2SC6
U4
1
2N7002
Q1
1
OLED 2x8 socket
J1
1
USB-C
J2
1
CAN to DigiDash
J3
1
Encoder 1 (Select)
J4
1
Encoder 2 (Volume)
J5
1
IR receiver
J6
1
PTS810
RESET
SW1
1
PTS810
BOOT
SW2
1
PTS645
BACK
SW3
1
PTS645
VIEW
SW4
2
B5819W
D1, D2
4
Yellow
D3, D4, D6, D7
1
NUP2105L
D5
4
10U
10u
C1, C5, C7, C8
5
100N
100n
C2, C6, C9, C10, C11
Show 8 more
QtyPartRefs
1
22U
22u
C3
1
1u
C4
8
10N
10n
C12, C13, C14, C15, C16, C17, C18, C19
2
100K
100k
R1, R10
10
10K
10k
R2, R11, R12, R13, R14, R15, R16, R17 +2
2
5.1K
5.1k
R3, R4
1
1k
R5
4
100
R6, R7, R8, R9

ConsoleBoard design files

The KiCad project lives in the roblesterjr04/el-camino-dash repository on GitHub; these links point at the commit this page was built from.

ConsoleBoard: common questions

What microcontroller does the ConsoleBoard use?

The ConsoleBoard is built around the ESP32-S3-WROOM-1-N8, from the ESP32 family.

How big is the ConsoleBoard PCB?

The ConsoleBoard measures 100 × 50 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the ConsoleBoard?

60 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ConsoleBoard design files?

From the roblesterjr04/el-camino-dash repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ConsoleBoard design in my own project?

Yes, under the terms of its MIT license, which roblesterjr04 chose for the repository.

Can I test firmware for the ConsoleBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in el-camino-dash

Similar boards