ConsoleBoardRS

roblesterjr04·el-camino-dash·ConsoleBoardRS/ConsoleBoardRS.kicad_pcb

ConsoleBoardRS PCB layout, top view — open source ESP32 board by roblesterjr04

About the ConsoleBoardRS PCB

ConsoleBoardRS is an open source ESP32 PCB design by roblesterjr04, published on GitHub under the MIT license. It is a 2-layer board measuring 108 × 35 mm, with 42 components from 25 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8, from the ESP32 family. Other key parts include the TJA1051T/3, AP7361C-33E and USBLC6-2SC6. By type, the board carries 16 capacitors, 11 resistors, 6 connectors, 4 ICs, 3 diodes and 2 switches.

From the project

A variant of the console board (CAN node 0x13) for a housing 111.5 × 38.5 mm outside, with the controls on two RetroSound 258A-style knobs (each an encoder with push, inside a ring that pushes left or right) on RJ9 (4P4C) cables instead of keys on the board. Same ESP32-S3, the sa

A variant of the console board (CAN node 0x13) for a housing 111.5 × 38.5 mm outside, with the controls on two RetroSound 258A-style knobs (each an encoder with push, inside a ring that pushes left or right) on RJ9 (4P4C) cables instead of keys on the board. Same ESP32-S3, the same SSD1322 256 × 64 OLED module (100 × 33.5 mm) on the same 2 × 8 socket, CAN, USB-C and an IR receiver (a TSOP4838 on the board); no keys and no key LEDs.

Main components on the ConsoleBoardRS

ConsoleBoardRS bill of materials (BOM)

42 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1-N8
U1
1
TJA1051T/3
U2
1
AP7361C-33E
U3
1
USBLC6-2SC6
U4
1
OLED 2x8 socket
J1
1
USB-C
J2
1
CAN to DigiDash
J3
1
Select knob (RJ9)
J4
1
Volume knob (RJ9)
J5
1
TSOP4838
J6
1
PTS810
RESET
SW1
1
PTS810
BOOT
SW2
2
B5819W
D1, D2
1
NUP2105L
D5
4
10U
10u
C1, C5, C7, C8
6
100N
100n
C2, C6, C9, C10, C11, C16
1
22U
22u
C3
1
1u
C4
4
10N
10n
C12, C13, C14, C15
1
100K
100k
R1
Show 5 more
QtyPartRefs
2
10K
10k
R2, R10
2
5.1K
5.1k
R3, R4
1
1k
R5
4
33K
33k
R6, R7, R8, R9
1
100
R11

ConsoleBoardRS design files

The KiCad project lives in the roblesterjr04/el-camino-dash repository on GitHub; these links point at the commit this page was built from.

ConsoleBoardRS: common questions

What microcontroller does the ConsoleBoardRS use?

The ConsoleBoardRS is built around the ESP32-S3-WROOM-1-N8, from the ESP32 family.

How big is the ConsoleBoardRS PCB?

The ConsoleBoardRS measures 108 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ConsoleBoardRS?

42 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ConsoleBoardRS design files?

From the roblesterjr04/el-camino-dash repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ConsoleBoardRS design in my own project?

Yes, under the terms of its MIT license, which roblesterjr04 chose for the repository.

Can I test firmware for the ConsoleBoardRS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in el-camino-dash

Similar boards