BenchBoard
roblesterjr04·el-camino-dash·BenchBoard/BenchBoard.kicad_pcb
About the BenchBoard PCB
BenchBoard is an open source PCB design by roblesterjr04, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 67 components from 39 distinct parts.
Other key parts include the TPS563201, AP2112K-3.3 and MCP2562-E/SN. By type, the board carries 21 resistors, 15 connectors, 12 capacitors, 9 fuses, 3 ICs and 3 transistors.
It belongs with the audio and power & battery designs in this gallery.
From the project
A small board that stands in for DigiDash2 on the bench: two card slots and one round screen on one CAN bus, powered from a 12 V bench adapter, with a header for a USB-CAN adapter. A card, a screen, or both talk to each other exactly as they would in the dash, without ordering th
A small board that stands in for DigiDash2 on the bench: two card slots and one round screen on one CAN bus, powered from a 12 V bench adapter, with a header for a USB-CAN adapter. A card, a screen, or both talk to each other exactly as they would in the dash, without ordering the 309 × 104 mm 4-layer main board.
- 100 × 100 mm, 2 layers, every part on the top side (the cheapest prototype bracket at JLCPCB / PCBWay) - Two slots (slot 1 and slot 2 of DigiDash2: same 2×15 socket, same pinout, same 25.4 mm spacing, parallel; cards stand on edge with their parts side toward the top edge, slot 1…
Main components on the BenchBoard
BenchBoard bill of materials (BOM)
67 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS563201 | SOT-23-6 | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | MCP2562-E/SN | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 3 | 2N7002 | SOT-23 | Q1, Q2, Q3 |
| 1 | 12V IN | BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | IGN | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Slot 1 | PinSocket_2x15_P2.54mm_Vertical | J3 |
| 1 | Slot 2 | PinSocket_2x15_P2.54mm_Vertical | J4 |
| 1 | LAMP | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | REV | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | CAN | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | TERM | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | Screen | PinHeader_2x20_P2.54mm_Horizontal | J9 |
| 1 | ROLE | PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | SENS | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | SERIAL | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J12 |
| 1 | I2C | PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | I2S | PinHeader_1x06_P2.54mm_Vertical | J14 |
| 1 | AUDIO | Jack_3.5mm_CUI_SJ1-3523N_Horizontal | J15 |
| 4 | 0.5A | Fuse_1206_3216Metric | F1, F2, F5, F6 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0.1A | Fuse_1206_3216Metric | F3, F7 |
| 2 | 0.2A | Fuse_1206_3216Metric | F4, F8 |
| 1 | 1.5A | Fuse_1812_4532Metric | F9 |
| 1 | SS34 | D_SMA | D1 |
| 1 | PWR | LED_0603_1608Metric | D2 |
| 1 | WAKE | LED_0603_1608Metric | D3 |
| 1 | 3.3u | L_Bourns_SRN6045TA | L1 |
| 2 | 10u | C_1206_3216Metric | C1, C2 |
| 6 | 100n | C_0603_1608Metric | C3, C4, C8, C10, C11, C12 |
| 2 | 22u | C_0805_2012Metric | C5, C6 |
| 2 | 10u | C_0805_2012Metric | C7, C9 |
| 4 | 100k | R_0603_1608Metric | R1, R8, R10, R12 |
| 1 | 54.9k | R_0603_1608Metric | R2 |
| 4 | 10k | R_0603_1608Metric | R3, R5, R15, R18 |
| 7 | 1k | R_0603_1608Metric | R4, R6, R9, R11, R13, R16, R17 |
| 1 | 3.3k | R_0603_1608Metric | R7 |
| 1 | 120 | R_0603_1608Metric | R14 |
| 1 | 20k | R_0603_1608Metric | R19 |
| 2 | 4.7k | R_0603_1608Metric | R20, R21 |
BenchBoard design files
The KiCad project lives in the roblesterjr04/el-camino-dash repository on GitHub; these links point at the commit this page was built from.
BenchBoard: common questions
How big is the BenchBoard PCB?
The BenchBoard measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BenchBoard?
67 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BenchBoard design files?
From the roblesterjr04/el-camino-dash repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BenchBoard design in my own project?
Yes, under the terms of its MIT license, which roblesterjr04 chose for the repository.
More boards in el-camino-dash
ESP32
Panel
roblesterjr04
329 × 255.5 mm483 parts4LMIT6DigiDash2
roblesterjr04
329 × 113 mm179 parts4LMIT6DigiDash3
roblesterjr04
329 × 113 mm150 parts2LMIT6STM32
SensorCard2
roblesterjr04
80 × 60 mm114 parts2LMIT6AVR/Arduino
SensorCard
roblesterjr04
80 × 60 mm114 parts4LMIT6AVR/Arduino
DigiDash
roblesterjr04
309 × 103.5 mm97 parts2LMIT6ESP32
AudioCarrier
roblesterjr04
80 × 60 mm77 parts2LMIT6ESP32
ConsoleBoard
roblesterjr04
100 × 50 mm60 parts4LMIT6ESP32
LTECard
roblesterjr04
80 × 60 mm58 parts4LMIT6STM32
RadioCard
roblesterjr04
80 × 60 mm50 parts2LMIT6ESP32
ConsoleBoardRS
roblesterjr04
108 × 35 mm42 parts2LMIT6
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k