10 open source boards using the SIM800C
Real designs built with the SIM800C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Gsm iot core hw
iotmakervn
25.4 × 64.8 mm92 parts2LNo license3STM32
TS Tracker
tor1kk
48 × 50 mm69 parts4LGPL-3.03ESP32
OpenAV
JIBSIL
70.3 × 53.9 mm35 parts2LMIT2STM32
Sim multiplexer
0x178F
436 × 70 mm150 parts4LApache-2.00STM32
GeoLock
sudo-junkie
75.1 × 62.9 mm91 parts2LGPL-2.00ESP32
Esp32-gateway hw
monkeykingblack
100.3 × 76.2 mm72 parts2LNo license0ESP32
GPS-GSM Tracker with EEPROM Logging
Ruthvik-reddy-A
103.9 × 77.6 mm59 parts4LNo license0GSM communications SIM800 breakout
SolderedElectronics
38 × 54 mm54 parts2LTAPR-OHL-1.00P-1000010 Okra Cicada 2G PCBA
EnAccess
40 × 65 mm53 parts2LMIT122G GSM breakout
SolderedElectronics
38 × 54 mm51 parts2LTAPR-OHL-1.00
How designs wire the SIM800C
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the SIM800C connects to, and the resistors, capacitors and other passives placed on it.
- The SIM_DATA pin has a series resistor on 8 of 9 designs, most often 51 Ω (then 22 Ω).
- The SIM_CLK pin has a series resistor on 8 of 9 designs, most often 51 Ω (then 22 Ω).
- The SIM_RST pin has a series resistor on 8 of 9 designs, most often 51 Ω (then 22 Ω).
- The BT_ANT pin is left unconnected on 9 of 9 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| UART1_RXDpin 2 | Connected to: The microcontroller 33% |
|
| UART1_RTSpin 3 | Connected to: Not connected 78% · a signal 22% | — |
| UART1_CTSpin 4 | Connected to: Not connected 78% · a signal 22% | — |
| UART1_DCDpin 5 | Connected to: Not connected 78% · a signal 22% | — |
| UART1_DTRpin 6 | Connected to: Not connected 67% · a signal 33% | — |
| UART1_RIpin 7 | Connected to: Not connected 67% · a signal 33% | — |
| GNDpin 8, 13, 19, 21, 27, 30, 31, 33, 36, 37 | Connected to: GND 87% | — |
| MICPpin 9 | Connected to: Not connected 78% · a signal 22% | — |
| MICNpin 10 | Connected to: Not connected 78% | — |
| SPKPpin 11 | Connected to: Not connected 78% · a signal 22% | — |
| SPKNpin 12 | Connected to: Not connected 89% | — |
| SIM_DETpin 14 | Connected to: Not connected 89% | — |
| SIM_DATApin 15 | Connected to: Signal 100% |
|
| SIM_CLKpin 16 | Connected to: Signal 100% |
|
| SIM_RSTpin 17 | Connected to: Signal 100% |
|
| SIM_VDDpin 18 | Connected to: A connector 67% |
|
| BT_ANTpin 20 | Connected to: Not connected 100% | — |
| UART2_TXDpin 22 | Connected to: Not connected 89% | — |
| UART2_RXDpin 23 | Connected to: Not connected 89% | — |
| USB_VBUSpin 24 | Connected to: Not connected 89% | — |
| USB_DPpin 25 | Connected to: Not connected 89% | — |
| USB_DMpin 26 | Connected to: Not connected 89% | — |
| VRTCpin 28 | Connected to: Not connected 44% · a signal 44% |
|
| RF_SYNCpin 29 | Connected to: Not connected 100% | — |
| GSM_ANTpin 32 | Connected to: A connector 56% |
|
| VBATpin 34, 35 | Connected to: VDD 67% · a signal 33% |
|
| ADCpin 38 | Connected to: Not connected 89% | — |
| VDD_EXTpin 40 | Connected to: Not connected 67% · 2.8V 22% | — |
| NETLIGHTpin 41 | Connected to: Signal 78% · not connected 22% |
|
| STATUSpin 42 | Connected to: Not connected 67% · a signal 33% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include P-1000010 Okra Cicada 2G PCBA by EnAccess, Gsm iot core hw by iotmakervn, TS Tracker by tor1kk and OpenAV by JIBSIL.
The SIM800C in open source designs
The gallery holds 10 open source boards using the SIM800C from 9 GitHub repositories; a typical one measures about 59.2 × 63.9 mm and carries around 64 components.
70% are two-layer designs, the rest use four layers or more, and 70% carry an open source license.
The most starred is P-1000010 Okra Cicada 2G PCBA by EnAccess.
Parts used alongside the SIM800C
What boards using the SIM800C are built for
SIM800C: common questions
Where can I find a SIM800C reference design?
Each of the 10 boards on this page is a real design using the SIM800C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the SIM800C SIM_DATA pin?
The SIM_DATA pin has a series resistor on 8 of 9 designs, most often 51 Ω (then 22 Ω). Counted from the KiCad layouts of 9 open source designs using the SIM800C.
What resistor goes on the SIM800C SIM_CLK pin?
The SIM_CLK pin has a series resistor on 8 of 9 designs, most often 51 Ω (then 22 Ω). Counted from the KiCad layouts of 9 open source designs using the SIM800C.
What resistor goes on the SIM800C SIM_RST pin?
The SIM_RST pin has a series resistor on 8 of 9 designs, most often 51 Ω (then 22 Ω). Counted from the KiCad layouts of 9 open source designs using the SIM800C.
Which microcontrollers do boards using the SIM800C use?
Most are built on STM32 (4) and ESP32 (3).
How big is a typical board using the SIM800C?
The median is 59.2 × 63.9 mm, and 70% are two-layer designs.
What is the most popular open source board using the SIM800C?
By GitHub stars, P-1000010 Okra Cicada 2G PCBA by EnAccess, with 12 stars.
Can I simulate one of these boards using the SIM800C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.