2 open source boards using the PAT1220-C-10DB

Real designs built with the PAT1220-C-10DB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The PAT1220-C-10DB in open source designs

The gallery holds 2 open source boards using the PAT1220-C-10DB from 2 GitHub repositories; a typical one measures about 130.5 × 68.8 mm and carries around 51 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is CTS-Ground-Station-UHF-Antenna-Switch by CalgaryToSpace.

Microcontrollers on boards using the PAT1220-C-10DB

What boards using the PAT1220-C-10DB are built for

PAT1220-C-10DB: common questions

Where can I find a PAT1220-C-10DB reference design?

Each of the 2 boards on this page is a real design using the PAT1220-C-10DB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the PAT1220-C-10DB use?

Most are built on ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the PAT1220-C-10DB?

The median is 130.5 × 68.8 mm, and 50% are two-layer designs.

What is the most popular open source board using the PAT1220-C-10DB?

By GitHub stars, CTS-Ground-Station-UHF-Antenna-Switch by CalgaryToSpace, with 1 stars.

Can I simulate one of these boards using the PAT1220-C-10DB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part