Dancing forest
sequoia-hope·dancing-forest-pcb
About the Dancing forest PCB
Dancing forest is an open source ESP32 PCB design by sequoia-hope, published on GitHub under the Custom license license. It is a 4-layer board measuring 322.5 × 183.5 mm, with 216 components from 52 distinct parts.
Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the TXS0101DCKR, LD1086DT33TR, FT231XS, LSM6DS3 and DW01. By type, the board carries 88 LEDs, 27 resistors, 26 capacitors, 13 ICs, 9 connectors and 5 switches.
From the project
The PCB design for the Dancing Forest art project
PCB design files for The Dancing Forest, an interactive dynamic social art space
Please see https://www.thedancingforest.art/ for more info.
Main components on the Dancing forest
Dancing forest bill of materials (BOM)
216 components, 52 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | TXS0101DCKR | SOT-363_SC-70-6 | U1, U2, U6, U11 |
| 1 | LD1086DT33TR | TO-252-2 | U3 |
| 1 | FT231XS | SSOP-20_3.9x8.7mm_P0.635mm | U4 |
| 1 | LSM6DS3 | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U5 |
| 1 | DW01 | SOT-23-6_Handsoldering | U7 |
| 1 | TP4056 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U8 |
| 1 | FS8205A | SOT-23-6_Handsoldering | U9 |
| 1 | LIS3MDL | LGA-12_2x2mm_P0.5mm | U10 |
| 1 | INA199xxDCK | SOT-363_SC-70-6 | U12 |
| 1 | ESP32-S3-MINI-1-N8 | ESP32-S3-MINI-1-breakout | U13 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 2 | Q_NPN_BEC | SOT-23-3 | Q5, Q6 |
| 1 | USB_C_Receptacle_USB2.0 | 918-468K2029E50000 | J1 |
| 1 | SM04B-SRSS-TB(LF)(SN) | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4 |
| 1 | Conn_01x03 | Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J5 |
| 4 | Conn_01x01 | spring_F6-6-4-0.4Z | J7, J8, J19, J20 |
| 1 | Upper Connector | PinSocket_2x06_P2.00mm_Vertical | J11 |
| 1 | Lower Connector | PinHeader_2x06_P2.00mm_Vertical | J12 |
| 3 | Conn_01x05 | 5_pin | DIST1, DIST2, DIST3 |
| 1 | MountingHole_3.2mm_Plastite_#4 | H9 | H9 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MountingHole_3.2mm_Plastite_#4 | H10 | H10 |
| 1 | MountingHole_3.2mm_Plastite_#4 | H11 | H11 |
| 1 | MountingHole_3.2mm_Plastite_#4 | H12 | H12 |
| 2 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP4 |
| 24 | SK6812-SIDE | SK6812SIDE | RGBSIDE1, RGBSIDE2, RGBSIDE3, RGBSIDE4, RGBSIDE5, RGBSIDE6, RGBSIDE7, RGBSIDE8 +16 |
| 4 | SW_MEC_5G | SW_TS_1101_C_W | SW1, SW2, SW4, SW5 |
| 1 | CONFIG SWITCH | SW_DIP_SPSTx06_Slide_KingTek_DSHP06TS_W7.62mm_P1.27mm | SW3 |
| 2 | TestPoint | TestPoint_Keystone_5019_Minature | TP1, TP2 |
| 1 | VAL** | mousebite1 | mousebite1 |
| 1 | VAL** | mousebite2 | mousebite2 |
| 1 | VAL** | mousebite3 | mousebite3 |
| 1 | VAL** | mousebite4 | mousebite4 |
| 1 | VAL** | mousebite5 | mousebite5 |
| 1 | VAL** | mousebite6 | mousebite6 |
| 1 | VAL** | mousebite7 | mousebite7 |
| 72 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | RGBD1, RGBD2, RGBD3, RGBD4, RGBD5, RGBD6, RGBD7, RGBD8 +64 |
| 16 | SK6812-RGBW | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | RGBWD1, RGBWD2, RGBWD3, RGBWD4, RGBWD5, RGBWD6, RGBWD7, RGBWD8 +8 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | GREEN | LED_0805_2012Metric | D2 |
| 13 | 0.1uF | C_0603_1608Metric | C1, C2, C6, C10, C13, C17, C18, C21 +5 |
| 5 | 10u | C_0805_2012Metric | C3, C4, C5, C9, C16 |
| 4 | 0.1uF | C_0805_2012Metric | C7, C8, C14, C15 |
| 2 | 1u | C_0603_1608Metric | C12, C27 |
| 2 | 470uF 16V | CP_Elec_6.3x7.7 | C19, C20 |
| 11 | 10k 0.5% | R_0805_2012Metric | R1, R4, R19, R20, R21, R22, R23, R24 +3 |
| 6 | 5.1k | R_0603_1608Metric | R2, R3, R10, R11, R14, R18 |
| 2 | 100 | R_0805_2012Metric | R5, R13 |
| 3 | 1k | R_0805_2012Metric | R6, R7, R9 |
| 1 | 1.2k | R_0805_2012Metric | R8 |
| 1 | 0R | R_0805_2012Metric | R12 |
| 1 | 0.010 R | R_0805_2012Metric | R15 |
| 2 | 27 | R_0603_1608Metric | R16, R17 |
Dancing forest design files
The KiCad project lives in the sequoia-hope/dancing-forest-pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutdancing_forest.kicad_pcb
- Schematicdancing_forest.kicad_sch
Dancing forest: common questions
What microcontroller does the Dancing forest use?
The Dancing forest is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.
How big is the Dancing forest PCB?
The Dancing forest measures 322.5 × 183.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Dancing forest?
216 components, from 52 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dancing forest design files?
From the sequoia-hope/dancing-forest-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dancing forest design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Dancing forest without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in dancing-forest-pcb
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k