7 open source boards using the INA199xxDCK

Real designs built with the INA199xxDCK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the INA199xxDCK

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the INA199xxDCK connects to, and the resistors, capacitors and other passives placed on it.

  • The V+ pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 22 µF).
  • The REF pin is tied to GND on 5 of 6 designs.
  • The - pin is tied to GND on 4 of 6 designs (a signal on 2).
  • The + pin has a series resistor on 3 of 6 designs, most often 2 mΩ (then 100 kΩ).
REFpin 1Connected to: GND 83% · a signal 17%
GNDpin 2Connected to: GND 100%
V+pin 3Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (5), 22 µF (1)
+pin 4Connected to: Signal 83% · GND 17%
  • Series resistor on 50% · 2 mΩ (1), 100 kΩ (1), 10 kΩ (1)
  • Resistor to GND on 50% · 1 mΩ (1), 10 mΩ (1), 5 mΩ (1)
  • Capacitor to the supply on 33% · 4.7 µF (1), 10 µF (1)
-pin 5Connected to: GND 67% · a signal 33%
  • Series resistor on 33% · 2 mΩ (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SparkAltBatteryBoard by fahreddinaykut, AM32 AI8051U by Icey7122, SMDU PCB by sabanekko3 and Dancing forest by sequoia-hope.

The INA199xxDCK in open source designs

The gallery holds 7 open source boards using the INA199xxDCK from 6 GitHub repositories; a typical one measures about 77.6 × 84.2 mm and carries around 110 components.

57% use four copper layers or more, and 29% carry an open source license.

The most starred is SparkAltBatteryBoard by fahreddinaykut.

Parts used alongside the INA199xxDCK

Microcontrollers on boards using the INA199xxDCK

INA199xxDCK: common questions

Where can I find a INA199xxDCK reference design?

Each of the 7 boards on this page is a real design using the INA199xxDCK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the INA199xxDCK V+ pin?

The V+ pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 6 open source designs using the INA199xxDCK.

How is the INA199xxDCK REF pin connected?

The REF pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the INA199xxDCK.

How is the INA199xxDCK - pin connected?

The - pin is tied to GND on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the INA199xxDCK.

Which microcontrollers do boards using the INA199xxDCK use?

Most are built on ESP32 (2), STM32 (2) and AVR/Arduino (1).

How big is a typical board using the INA199xxDCK?

The median is 77.6 × 84.2 mm, and 43% are two-layer designs.

What is the most popular open source board using the INA199xxDCK?

By GitHub stars, SparkAltBatteryBoard by fahreddinaykut, with 20 stars.

Can I simulate one of these boards using the INA199xxDCK before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part