6 open source boards using the SN74LVC1G14DCKR

Real designs built with the SN74LVC1G14DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the SN74LVC1G14DCKR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SN74LVC1G14DCKR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 1 µF).
NCpin 1Connected to: Not connected 100%
Apin 2Connected to: Signal 100%
  • Pull-up to 3.3V on 33% · 100 kΩ (1), 4.7 kΩ (1)
GNDpin 3Connected to: GND 100%
VCCpin 5Connected to: 5V 83% · a signal 17%
  • Decoupling capacitor on 67% · 100 nF (6), 1 µF (2), 22 µF (2)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sonatino by luminationlabs, All in one-USB-3.1-Hub for-EE-Engineers by jobitjoseph, SCART switcher by nunosousa and 4-bit-Adder-Interface-Board by Shaxzodm2611.

The SN74LVC1G14DCKR in open source designs

The gallery holds 6 open source boards using the SN74LVC1G14DCKR from 6 GitHub repositories; a typical one measures about 100 × 67.1 mm and carries around 230 components.

100% use four copper layers or more, and 33% carry an open source license.

The most starred is Sonatino by luminationlabs.

Parts used alongside the SN74LVC1G14DCKR

Microcontrollers on boards using the SN74LVC1G14DCKR

What boards using the SN74LVC1G14DCKR are built for

SN74LVC1G14DCKR: common questions

Where can I find a SN74LVC1G14DCKR reference design?

Each of the 6 boards on this page is a real design using the SN74LVC1G14DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74LVC1G14DCKR VCC pin?

The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G14DCKR.

Which microcontrollers do boards using the SN74LVC1G14DCKR use?

Most are built on ESP32 (1) and Microchip SAM (1).

How big is a typical board using the SN74LVC1G14DCKR?

The median is 100 × 67.1 mm, and 0% are two-layer designs.

What is the most popular open source board using the SN74LVC1G14DCKR?

By GitHub stars, Sonatino by luminationlabs, with 39 stars.

Can I simulate one of these boards using the SN74LVC1G14DCKR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part