HardLabs

Geophonetdsconductschem

ARTS-Laboratory·Smart-Penetrometer-with-Edge-Computing-and-Intelligent-Embedded-Systems·SYS_DEV/Columbia/V0/V0.1/V0.1.0/hardware_design/PCB/geophonetdsconductschem.kicad_pcb

Geophonetdsconductschem PCB layout, top view — open source AVR/Arduino board by ARTS-Laboratory
Simulate this board

About the Geophonetdsconductschem PCB

Geophonetdsconductschem is an open source AVR/Arduino PCB design by ARTS-Laboratory, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 33 × 73.7 mm, with 21 components from 13 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the LMV324, DS3231M, Battery_Input, 4023 and ADS1115IDGS. By type, the board carries 6 resistors, 5 ICs, 4 capacitors, 3 connectors, 2 modules and 1 battery holder.

It belongs with the sensors designs in this gallery.

From the project

Design and development of a deployable UAV smart penetrometer

Main components on the Geophonetdsconductschem

LMV324DS3231MBattery_Input4023ADS1115IDGSSD_Card_ModuleArduino_Nano_v3.x

Geophonetdsconductschem bill of materials (BOM)

21 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LMV324
U1
1
DS3231M
U2
1
Battery_Input
U3
1
4023
U4
1
ADS1115IDGS
U5
1
SD_Card_Module
A1
1
Arduino_Nano_v3.x
A2
1
XLR3_Switched
J1
1
Conn_01x03_Female
J2
1
Conn_01x02_Female
J3
1
Battery_Cell
BT1
4
C_Small
C1, C2, C3, C4
6
R_Small_US
R1, R2, R3, R4, R5, R6

Geophonetdsconductschem design files

The KiCad project lives in the ARTS-Laboratory/Smart-Penetrometer-with-Edge-Computing-and-Intelligent-Embedded-Systems repository on GitHub; these links point at the commit this page was built from.

Geophonetdsconductschem: common questions

What microcontroller does the Geophonetdsconductschem use?

The Geophonetdsconductschem is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Geophonetdsconductschem PCB?

The Geophonetdsconductschem measures 33 × 73.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Geophonetdsconductschem?

21 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Geophonetdsconductschem design files?

From the ARTS-Laboratory/Smart-Penetrometer-with-Edge-Computing-and-Intelligent-Embedded-Systems repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Geophonetdsconductschem design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which ARTS-Laboratory chose for the repository.

Can I test firmware for the Geophonetdsconductschem without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Smart-Penetrometer-with-Edge-Computing-and-Intelligent-Embedded-Systems

Similar boards