Geophonetdsconductschem2
About the Geophonetdsconductschem2 PCB
Geophonetdsconductschem2 is an open source AVR/Arduino PCB design by ARTS-Laboratory, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 33 × 73.7 mm, with 22 components from 14 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the LMV324, DS3231M, Battery_Input, 4023 and ADS1115IDGS. By type, the board carries 6 resistors, 5 ICs, 4 connectors, 4 capacitors, 2 modules and 1 battery holder.
From the project
Design and development of a deployable UAV smart penetrometer
Main components on the Geophonetdsconductschem2
Geophonetdsconductschem2 bill of materials (BOM)
22 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMV324 | LMV324IDR | U1 |
| 1 | DS3231M | SOIC-16W_7.5x10.3mm_P1.27mm | U2 |
| 1 | Battery_Input | Battery_Input | U3 |
| 1 | 4023 | TDS_module | U4 |
| 1 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U5 |
| 1 | SD_Card_Module | SD Module | A1 |
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A2 |
| 1 | XLR3_Switched | grounded_switch | J1 |
| 1 | Conn_01x03_Female | PinSocket_1x03_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x02_Female | PinSocket_1x02_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x04_Female | PinSocket_1x04_P2.54mm_Horizontal | J4 |
| 1 | Battery_Cell | battery_holder_10mm | BT1 |
| 4 | C_Small | C_1206_3216Metric | C1, C2, C3, C4 |
| 6 | R_Small_US | R_1206_3216Metric | R1, R2, R3, R4, R5, R6 |
Geophonetdsconductschem2 design files
The KiCad project lives in the ARTS-Laboratory/Smart-Penetrometer-with-Edge-Computing-and-Intelligent-Embedded-Systems repository on GitHub; these links point at the commit this page was built from.
Geophonetdsconductschem2: common questions
What microcontroller does the Geophonetdsconductschem2 use?
The Geophonetdsconductschem2 is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the Geophonetdsconductschem2 PCB?
The Geophonetdsconductschem2 measures 33 × 73.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Geophonetdsconductschem2?
22 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Geophonetdsconductschem2 design files?
From the ARTS-Laboratory/Smart-Penetrometer-with-Edge-Computing-and-Intelligent-Embedded-Systems repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Geophonetdsconductschem2 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which ARTS-Laboratory chose for the repository.
Can I test firmware for the Geophonetdsconductschem2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Smart-Penetrometer-with-Edge-Computing-and-Intelligent-Embedded-Systems
AVR/ArduinoSmart penetrometer v0.4.0
33 × 74.9 mm44 parts2LCC-BY-SA-4.06
AVR/ArduinoSmart penetrometer.kicad pro
29 × 93.3 mm32 parts4LCC-BY-SA-4.06
AVR/ArduinoGeophonetdsconductschem
33 × 73.7 mm21 parts2LCC-BY-SA-4.06
AVR/ArduinoSmart penetrometer
33 × 74.9 mm19 parts2LCC-BY-SA-4.06
AVR/ArduinoGeophonetdsconductschem3
33 × 71.1 mm14 parts2LCC-BY-SA-4.06
AVR/ArduinoSPECIES receiver
117.6 × 56.1 mm10 parts2LCC-BY-SA-4.06
AVR/ArduinoSensor Spike
55.9 × 68.6 mm6 parts2LCC-BY-SA-4.06
Similar boards
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoEasyduino Atmega
Hanqaqa
68.8 × 53.6 mm35 parts4LCERN-OHL-P-2.0746
AVR/ArduinoEasyduino Atmega Nano
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746
AVR/ArduinoUsbGpib
xyphro
54 × 15 mm21 parts2LMIT683
AVR/ArduinoLumberjack
peej
284.7 × 94.2 mm149 parts2LMIT402