7 open source boards using the SD_Card_Module
Real designs built with the SD_Card_Module, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoSmart penetrometer v0.4.0
ARTS-Laboratory
33 × 74.9 mm44 parts2LCC-BY-SA-4.06
VAMP
syntonos
217.9 × 60 mm88 parts4LGPL-3.01
AVR/ArduinoSmart penetrometer.kicad pro
29 × 93.3 mm32 parts4LCC-BY-SA-4.06
AVR/ArduinoGeophonetdsconductschem2
33 × 73.7 mm22 parts2LCC-BY-SA-4.06
AVR/ArduinoGeophonetdsconductschem
33 × 73.7 mm21 parts2LCC-BY-SA-4.06
AVR/ArduinoSmart penetrometer
33 × 74.9 mm19 parts2LCC-BY-SA-4.06
AVR/ArduinoGeophonetdsconductschem3
33 × 71.1 mm14 parts2LCC-BY-SA-4.06
The SD_Card_Module in open source designs
The gallery holds 7 open source boards using the SD_Card_Module from 2 GitHub repositories; a typical one measures about 33 × 73.7 mm and carries around 22 components.
71% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Smart penetrometer v0.4.0 by ARTS-Laboratory.
Microcontrollers on boards using the SD_Card_Module
What boards using the SD_Card_Module are built for
SD_Card_Module: common questions
Where can I find a SD_Card_Module reference design?
Each of the 7 boards on this page is a real design using the SD_Card_Module. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SD_Card_Module use?
Most are built on AVR/Arduino (6).
How big is a typical board using the SD_Card_Module?
The median is 33 × 73.7 mm, and 71% are two-layer designs.
What is the most popular open source board using the SD_Card_Module?
By GitHub stars, Smart penetrometer v0.4.0 by ARTS-Laboratory, with 6 stars.
Can I simulate one of these boards using the SD_Card_Module before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.