33 open source boards using the 74LS574

Real designs built with the 74LS574, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

33 boardsClear filters|Most starred

How designs wire the 74LS574

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the 74LS574 connects to, and the resistors, capacitors and other passives placed on it.

  • The OE pin is tied to GND on 12 of 20 designs (a signal on 8).
  • The VCC pin has a decoupling capacitor on 10 of 20 designs, most often 100 nF (then 10 nF).
OEpin 1Connected to: GND 60% · a signal 40%
GNDpin 10Connected to: GND 90%
VCCpin 20Connected to: 5V 90%
  • Decoupling capacitor on 50% · 100 nF (8), 10 nF (1)

17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Av board by rjw57, TI99 22 by danwerner21, Printer+Sticks by aslak3 and HEC-Model-Z1 by Andy18650.

The 74LS574 in open source designs

The gallery holds 33 open source boards using the 74LS574 from 20 GitHub repositories; a typical one measures about 140.7 × 99.8 mm and carries around 86 components.

88% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is Av board by rjw57.

Microcontrollers on boards using the 74LS574

74LS574: common questions

Where can I find a 74LS574 reference design?

Each of the 33 boards on this page is a real design using the 74LS574. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74LS574 OE pin connected?

The OE pin is tied to GND on 12 of 20 designs (a signal on 8). Counted from the KiCad layouts of 20 open source designs using the 74LS574.

What decoupling capacitors do designs use on the 74LS574 VCC pin?

The VCC pin has a decoupling capacitor on 10 of 20 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 20 open source designs using the 74LS574.

What parts are used alongside the 74LS574?

The 74LS04, 74LS245, 74LS00, 74LS02 and 74LS138 appear in the most repositories here.

Which microcontrollers do boards using the 74LS574 use?

Most are built on AVR/Arduino (2).

How big is a typical board using the 74LS574?

The median is 140.7 × 99.8 mm, and 88% are two-layer designs.

What is the most popular open source board using the 74LS574?

By GitHub stars, Av board by rjw57, with 68 stars.

Can I simulate one of these boards using the 74LS574 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part