46 open source boards using the 74LS283
Real designs built with the 74LS283, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Eda designs
kyllikki
237.5 × 171.5 mm148 parts2LMIT32Microdigital - TK 2000
clemarfolly
236.8 × 169.8 mm195 parts2LNo license17TIM-011B
Board-Folk
232.8 × 204.2 mm149 parts2LNo license8Alu
lorenzonotaro
200 × 150 mm45 parts2LNo license8SPU2
rraider
400 × 300 mm736 parts2LMIT7ALUModule
crempp
177 × 121.9 mm168 parts2LNo license4Northstar HD-5
abzman
190.6 × 172.4 mm154 parts2LUnlicense4AVR/Arduino
TCPU8-Alpha
halfburnttoast
150 × 150 mm138 partsGPL-2.04Tom-1
tcr
127 × 127 mm83 parts4LNo license3BitStack-DigiTrainer
RetroStack
320 × 150 mm262 parts2LMIT2Huhhhh I didnt save
ethanjamesauto
229.9 × 93.3 mm365 parts2LNo license18bitCPU
BrainwashAlpha
246.4 × 185.4 mm277 parts4LNo license1PCB EDU
AGH-Logic-Unit
281.2 × 157.9 mm125 parts4LNo license1- schematic only · 112 parts
MSAP-1
mehrantsi
112 partsMIT1 8 Bit Computer
rick0x00
50 × 100 mm449 parts2LApache-2.008-bit computer
dragonruler1000
414 × 187.5 mm331 parts6LMIT08-Bit-Computer
phteven7
246.4 × 185.4 mm277 parts4LNo license08bit computer
funkybooboo
246.4 × 185.4 mm277 parts4LNo license08bit-Sch old-
Arvind595
246.4 × 185.4 mm277 parts4LNo license08bit computer
tonygilkerson
246.4 × 185.4 mm277 parts4LNo license0Backtobasic
marcusyoung
246.4 × 185.4 mm277 parts4LNo license08bit computer
ChargeInMotion
246.4 × 185.4 mm276 parts4LMIT0Ya4b alu
lafehubert
227 × 150.1 mm133 parts2LNo license0WINK MSP-MDC redux
hkzlab
104.1 × 106.7 mm41 parts2LCC-BY-NC-4.00AVR/Arduino
4Bit Adder
Ventratrat
78.7 × 71.1 mm25 parts2LGPL-3.00P2000m cpm coboard
ifilot
122.9 × 63.5 mm24 parts2LNo license0- schematic only · 73 partsAVR/Arduino
Concordia
LamdaDev
73 partsNo license0 - schematic only · 49 parts
4BitCPU
DylanMcKaige
49 partsNo license0 Alu
jes
237.5 × 102.9 mm79 parts2LUnlicense301Alu base
lorenzonotaro
200 × 150 mm45 parts2LNo license8Processor attempt 1
ethanjamesauto
229.9 × 93.3 mm365 parts2LNo license1Alu
OldTrail
237.5 × 102.9 mm79 parts2LNo license0Alu
codemonkey76
90.2 × 88.9 mm33 parts2LNo license0ALU alone
ChargeInMotion
66.8 × 36.6 mm30 parts2LMIT0Dator
JAndersM
132.1 × 62.9 mm27 parts2LGPL-3.00Processor attempt 3
ethanjamesauto
229.9 × 93.3 mm365 parts2LNo license1
How designs wire the 74LS283
Read from the KiCad layouts of 34 open source designs, one per repository: what each pin of the 74LS283 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 15 of 34 designs, most often 100 nF (then 47 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: VCC 94% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Alu by jes, Eda designs by kyllikki, D register by TomNisbet and Microdigital - TK 2000 by clemarfolly.
The 74LS283 in open source designs
The gallery holds 46 open source boards using the 74LS283 from 38 GitHub repositories; a typical one measures about 227 × 127 mm and carries around 129 components.
76% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.
The most starred is Alu by jes.
Parts used alongside the 74LS283
Microcontrollers on boards using the 74LS283
What boards using the 74LS283 are built for
74LS283: common questions
Where can I find a 74LS283 reference design?
Each of the 46 boards on this page is a real design using the 74LS283. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS283 VCC pin?
The VCC pin has a decoupling capacitor on 15 of 34 designs, most often 100 nF (then 47 nF). Counted from the KiCad layouts of 34 open source designs using the 74LS283.
What parts are used alongside the 74LS283?
The 74LS08, 74LS32, 74LS86, 74LS245 and 74LS04 appear in the most repositories here.
Which microcontrollers do boards using the 74LS283 use?
Most are built on AVR/Arduino (3).
How big is a typical board using the 74LS283?
The median is 227 × 127 mm, and 76% are two-layer designs.
What is the most popular open source board using the 74LS283?
By GitHub stars, Alu by jes, with 301 stars.
Can I simulate one of these boards using the 74LS283 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.