24 open source boards using the AY-3-8910

Real designs built with the AY-3-8910, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

24 boardsClear filters|Most starred

How designs wire the AY-3-8910

Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the AY-3-8910 connects to, and the resistors, capacitors and other passives placed on it.

  • The A pin has a series resistor on 16 of 17 designs, most often 10 kΩ (then 1 kΩ).
  • The B pin has a series resistor on 15 of 18 designs, most often 10 kΩ (then 2.2 kΩ).
  • The C pin has a series resistor on 15 of 17 designs, most often 10 kΩ (then 2.2 kΩ).
  • The N/C pin is left unconnected on 17 of 17 designs.
GNDpin 1Connected to: GND 100%
NCpin 2Connected to: Not connected 94%
Bpin 3Connected to: A connector 22%
  • Series resistor on 83% · 10 kΩ (10), 2.2 kΩ (4), 22 kΩ (2)
  • Resistor to GND on 50% · 1 kΩ (8), 10 kΩ (1)
Apin 4Connected to: Signal 100%
  • Series resistor on 94% · 10 kΩ (10), 1 kΩ (5), 22 kΩ (4)
  • Resistor to GND on 53% · 1 kΩ (8), 10 kΩ (1)
N/Cpin 5Connected to: Not connected 100%
A9pin 24Connected to: GND 88%
A8pin 25Connected to: 5V 88%
TEST2pin 26Connected to: Not connected 94%
BC2pin 28Connected to: 5V 82% · a signal 18%
Cpin 38Connected to: A connector 24%
  • Series resistor on 88% · 10 kΩ (9), 2.2 kΩ (4), 1 kΩ (2)
  • Resistor to GND on 47% · 1 kΩ (7), 10 kΩ (1)
TEST1pin 39Connected to: Not connected 100%
VCCpin 40Connected to: 5V 100%

28 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32AY by djspawnbrest, We816 by danwerner21, Z80PSG1 by lynchaj and Jupiter-II-Expansion by ricaflops.

The AY-3-8910 in open source designs

The gallery holds 24 open source boards using the AY-3-8910 from 19 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 102 components.

100% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.

The most starred is ESP32AY-revD2 by djspawnbrest.

Microcontrollers on boards using the AY-3-8910

What boards using the AY-3-8910 are built for

AY-3-8910: common questions

Where can I find a AY-3-8910 reference design?

Each of the 24 boards on this page is a real design using the AY-3-8910. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the AY-3-8910 A pin?

The A pin has a series resistor on 16 of 17 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 18 open source designs using the AY-3-8910.

What resistor goes on the AY-3-8910 B pin?

The B pin has a series resistor on 15 of 18 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 18 open source designs using the AY-3-8910.

What resistor goes on the AY-3-8910 C pin?

The C pin has a series resistor on 15 of 17 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 18 open source designs using the AY-3-8910.

What parts are used alongside the AY-3-8910?

The 74LS00, 74LS02, 74LS04, 74LS245 and 27C512 appear in the most repositories here.

Which microcontrollers do boards using the AY-3-8910 use?

Most are built on ESP32 (3), ESP8266 (2), AVR/Arduino (1) and RP2040/RP2350 (1).

How big is a typical board using the AY-3-8910?

The median is 100 × 100 mm, and 100% are two-layer designs.

What is the most popular open source board using the AY-3-8910?

By GitHub stars, ESP32AY-revD2 by djspawnbrest, with 59 stars.

Can I simulate one of these boards using the AY-3-8910 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part