11 open source boards using the 74HCU04
Real designs built with the 74HCU04, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Zx sizif-512
UzixLS
213 × 65.1 mm203 parts2LMIT194Zx sizif-128
UzixLS
140 × 85 mm107 parts2LMIT32ESP32
Serrasoid TRX 29M
kazushinjo
170 × 150 mm328 parts4LGPL-3.00Raspberry Pi
Vinyl adc rev d
MadsRudolph
140 × 136 mm177 parts4LNo license0AVR/Arduino
CR2021 CPU v2
derpflanz
178.4 × 115.6 mm43 parts2LNo license0MUTIF09 Single Board Computer
ja1umi
155 × 114 mm68 parts2LMIT10Raspberry Pi
Vinyl adc rev e
MadsRudolph
118 × 88 mm177 parts4LNo license0Raspberry Pi
Vinyl adc rev c
MadsRudolph
170 × 120 mm111 parts4LNo license0TIMAYSound
Board-Folk
74.1 × 69.3 mm24 parts2LNo license8Vinyl adc digital
MadsRudolph
100 × 100 mm18 parts2LNo license0Vinyl adc osc
MadsRudolph
41.9 × 44 mm8 parts2LNo license0
How designs wire the 74HCU04
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74HCU04 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 3 has a series resistor on 5 of 7 designs, most often 1 MΩ (then 1 kΩ).
- Pin 1 has a series resistor on 4 of 7 designs, most often 1 MΩ (then 1 kΩ).
- Pin 5 has a series resistor on 4 of 7 designs, most often 1 MΩ (then 3.3 kΩ).
- Pin 6 has a series resistor on 4 of 7 designs, most often 1 MΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 71% · not connected 29% |
|
| Pin 2 | Connected to: Signal 71% · not connected 29% |
|
| Pin 3 | Connected to: Signal 71% · not connected 29% |
|
| Pin 5 | Connected to: Signal 57% · GND 29% |
|
| Pin 6 | Connected to: Signal 57% · not connected 43% |
|
| GNDpin 7 | Connected to: GND 100% | — |
| Pin 8 | Connected to: Signal 71% · not connected 29% |
|
| Pin 9 | Connected to: Signal 71% |
|
| Pin 11 | Connected to: Signal 71% |
|
| Pin 12 | Connected to: Not connected 57% · a signal 43% |
|
| Pin 13 | Connected to: GND 43% · a signal 43% |
|
| VCCpin 14 | Connected to: 5V 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zx sizif-512 by UzixLS, Zx sizif-128 by UzixLS, MUTIF09 Single Board Computer by ja1umi and TIMAYSound by Board-Folk.
The 74HCU04 in open source designs
The gallery holds 11 open source boards using the 74HCU04 from 7 GitHub repositories; a typical one measures about 140 × 100 mm and carries around 107 components.
64% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is Zx sizif-512 by UzixLS.
Parts used alongside the 74HCU04
Microcontrollers on boards using the 74HCU04
What boards using the 74HCU04 are built for
74HCU04: common questions
Where can I find a 74HCU04 reference design?
Each of the 11 boards on this page is a real design using the 74HCU04. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the 74HCU04 pin 3?
Pin 3 has a series resistor on 5 of 7 designs, most often 1 MΩ (then 1 kΩ). Counted from the KiCad layouts of 7 open source designs using the 74HCU04.
What resistor goes on the 74HCU04 pin 1?
Pin 1 has a series resistor on 4 of 7 designs, most often 1 MΩ (then 1 kΩ). Counted from the KiCad layouts of 7 open source designs using the 74HCU04.
What resistor goes on the 74HCU04 pin 5?
Pin 5 has a series resistor on 4 of 7 designs, most often 1 MΩ (then 3.3 kΩ). Counted from the KiCad layouts of 7 open source designs using the 74HCU04.
Which microcontrollers do boards using the 74HCU04 use?
Most are built on Raspberry Pi (3), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the 74HCU04?
The median is 140 × 100 mm, and 64% are two-layer designs.
What is the most popular open source board using the 74HCU04?
By GitHub stars, Zx sizif-512 by UzixLS, with 194 stars.
Can I simulate one of these boards using the 74HCU04 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.