Microduck project
Ngalalalekhaaa·microduck-project·elec_RPI_Robot_HAT/elec_RPI_Robot_HAT.kicad_pcb
About the Microduck project PCB
Microduck project is an open source PCB design by Ngalalalekhaaa, published on GitHub. It is a 4-layer board measuring 65 × 30.9 mm, with 122 components from 46 distinct parts.
Other key parts include the PAM8406D, TLV320AIC3104IRHBR, XC6206P182MR, DNP-CAT24C32HU4 and 74LVC1G08. By type, the board carries 44 capacitors, 40 resistors, 12 connectors, 11 ICs, 4 inductors and 3 test points.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
From the project
- IMU over I2C - Dynamixel motor communication: both TTL and 485 to drive Dynamixel/Feetech motor (requires cable adaptation) - in/out audio device with an integrated mems microphone. Wago connectors allows connection of loudspeaker and extra microphone. - expension Qwiic connect
- IMU over I2C - Dynamixel motor communication: both TTL and 485 to drive Dynamixel/Feetech motor (requires cable adaptation) - in/out audio device with an integrated mems microphone. Wago connectors allows connection of loudspeaker and extra microphone. - expension Qwiic connectors, 1 mm/3V3. Please refer to the schematic for knowing which can be use on you raspberry pi.

Main components on the Microduck project
Microduck project bill of materials (BOM)
122 components, 46 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PAM8406D | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | TLV320AIC3104IRHBR | VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm | U2 |
| 1 | XC6206P182MR | SOT-23-3 | U3 |
| 1 | DNP-CAT24C32HU4 | TDFN-8_L3.0-W2.0-P0.50-BL-EP | U4 |
| 1 | 74LVC1G08 | SOT-23-5 | U5 |
| 1 | SN74LVC1G125DBV | SOT-23-5 | U6 |
| 1 | SN74LVC1G126DBVR | SOT-23-5 | U7 |
| 1 | SIT3088E | MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm | U8 |
| 1 | AP63205 | TSOT-23-6 | U9 |
| 1 | LM5050-1 | TSOT-23-6 | U10 |
| 1 | BMI088 | Bosch_LGA-16_4.5x3mm_P0.5mm_LayoutBorder7x1y_ClockwisePinNumbering | U11 |
| 1 | MMBT3906 | SOT-23 | Q1 |
| 1 | SI2312CDS-T1-GE3 | TSOT-23 | Q2 |
| 1 | C7425459 12 MHz | Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | Y1 |
| 3 | WAGO-2 Wago-2 | Wago_2059-302_998-403 | J1, J2, J9 |
| 2 | DYNAMIXEL-4 Dynamixel-4 | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J3, J11 |
| 1 | C2685112 Female Header 2x20 SMD | PinHeader_2x20_P2.54mm_Vertical_with_rasp_HAT_zero_SMD_connector | J4 |
| 4 | C160390 JST SH | JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J5, J6, J7, J8 |
| 2 | DYNAMIXEL-3 Dynamixel-3 | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J13, J14 |
| 1 | C7587901 Microphone_MEMS | MIC-SMD_4P-L2.8-W1.9-P1.84-TL | MK1 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C913703 100R thermistor | R_0603_1608Metric | TH1 |
| 3 | TestPoint | TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | TP2, TP3, TP4 |
| 1 | BAT54W | SOT-323_SC-70 | D1 |
| 1 | C19077392 3V3 Zener Diode | D_SOD-123 | D2 |
| 1 | 5V1 | D_SOD-323 | D4 |
| 1 | C76884 1.3A 600R@100MHz | L_0402_1005Metric | FB1 |
| 2 | C88970 2A - 120R@100MHz | L_0402_1005Metric | FB2, FB3 |
| 1 | C57254 6,8u 2A | L_Bourns_SRN6045TA | L4 |
| 15 | 1u | C_0402_1005Metric | C1, C2, C3, C4, C6, C10, C27, C29 +7 |
| 5 | 10U 10u | C_0603_1608Metric | C5, C7, C12, C13, C37 |
| 2 | 220N 220n | C_0402_1005Metric | C8, C9 |
| 12 | 100N 100n | C_0402_1005Metric | C11, C14, C15, C16, C17, C18, C26, C28 +4 |
| 1 | C72488 10u 63V | CP_Elec_6.3x7.7 | C19 |
| 1 | C307331 100n 50V | C_0402_1005Metric | C20 |
| 2 | C84419 22u 6V3 | C_0603_1608Metric | C21, C22 |
| 3 | C1525 100n 6V3 | C_0402_1005Metric | C23, C24, C39 |
| 1 | DNP-100N DNP-100n | C_0402_1005Metric | C25 |
| 2 | 10N 10n | C_0402_1005Metric | C34, C44 |
| 19 | 10K 10k | R_0402_1005Metric | R1, R2, R6, R12, R13, R20, R21, R22 +11 |
| 11 | C17168 0R | R_0402_1005Metric | R3, R4, R5, R7, R9, R14, R15, R18 +3 |
| 1 | 100R | R_0402_1005Metric | R8 |
| 2 | DNP-10K DNP-10k | R_0402_1005Metric | R10, R11 |
| 3 | DNP-0R | R_0402_1005Metric | R16, R17, R41 |
| 1 | 20K 20k | R_0402_1005Metric | R28 |
| 1 | 150R | R_0402_1005Metric | R33 |
| 2 | DNP-1M | R_0402_1005Metric | R36, R37 |
Microduck project design files
The KiCad project lives in the Ngalalalekhaaa/microduck-project repository on GitHub; these links point at the commit this page was built from.
Microduck project: common questions
How big is the Microduck project PCB?
The Microduck project measures 65 × 30.9 mm, has 4 copper layers and is 1 mm thick.
How many components are on the Microduck project?
122 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Microduck project design files?
From the Ngalalalekhaaa/microduck-project repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Microduck project design in my own project?
The repository has no license, so all rights stay with Ngalalalekhaaa. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k