4 open source boards using the TLV320AIC3104IRHBR

Real designs built with the TLV320AIC3104IRHBR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The TLV320AIC3104IRHBR in open source designs

The gallery holds 4 open source boards using the TLV320AIC3104IRHBR from 4 GitHub repositories; a typical one measures about 65 × 30.9 mm and carries around 122 components.

75% use four copper layers or more, and 75% carry an open source license.

The most starred is Elec RPI Robot HAT by pollen-robotics.

Microcontrollers on boards using the TLV320AIC3104IRHBR

What boards using the TLV320AIC3104IRHBR are built for

TLV320AIC3104IRHBR: common questions

Where can I find a TLV320AIC3104IRHBR reference design?

Each of the 4 boards on this page is a real design using the TLV320AIC3104IRHBR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TLV320AIC3104IRHBR?

The XC6206P182MR, 74LVC1G08, AP63205, DNP-CAT24C32HU4 and LM5050-1 appear in the most repositories here.

Which microcontrollers do boards using the TLV320AIC3104IRHBR use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the TLV320AIC3104IRHBR?

The median is 65 × 30.9 mm, and 25% are two-layer designs.

What is the most popular open source board using the TLV320AIC3104IRHBR?

By GitHub stars, Elec RPI Robot HAT by pollen-robotics, with 108 stars.

Can I simulate one of these boards using the TLV320AIC3104IRHBR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part