7 open source boards using the 74F00
Real designs built with the 74F00, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414Sun3 60
54weasels
231.1 × 340.4 mm225 parts4LNo license34CompaqportableIII
raymondh2
194 × 170.6 mm123 parts2LNo license17Hydra-16
danstruthers
304.8 × 243.8 mm199 parts6LNo license1PIC
Micro 8088
Vakon84
152.4 × 101.6 mm71 partsGPL-3.00Sun3 60 layout2 routing2
54weasels
231.1 × 340.4 mm225 parts4LNo license34CompaqPortableISACHASSIS
raymondh2
120.3 × 61.2 mm17 parts2LNo license17
How designs wire the 74F00
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74F00 connects to, and the resistors, capacitors and other passives placed on it.
- The CX1 pins is left unconnected on 80% of them (a signal on 2).
- The VCC pins have a capacitor to GND on 3 of 5 designs, most often 100 nF.
- The OUT_2 pin is left unconnected on 3 of 5 designs (a signal on 2).
- The CX2 pins have a series resistor on 2 of 5 designs, most often 1 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1, 13, 14 | Connected to: VCC 47% · a signal 47% |
|
| CX1pin 3, 4 | Connected to: Not connected 80% · a signal 20% | — |
| GNDpin 5, 7, 9 | Connected to: GND 60% · a signal 40% | — |
| OUT_2pin 8 | Connected to: Not connected 60% · a signal 40% | — |
| CX2pin 10, 11 | Connected to: ATF16V8B 20% · not connected 30% · GND 20% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Micro 8088 by skiselev, Sun3 60 by 54weasels, CompaqportableIII by raymondh2 and Hydra-16 by danstruthers.
The 74F00 in open source designs
The gallery holds 7 open source boards using the 74F00 from 5 GitHub repositories; a typical one measures about 193.9 × 170.6 mm and carries around 123 components.
60% use four copper layers or more, and 29% carry an open source license.
The most starred is Micro 8088 by skiselev.
Parts used alongside the 74F00
Microcontrollers on boards using the 74F00
What boards using the 74F00 are built for
74F00: common questions
Where can I find a 74F00 reference design?
Each of the 7 boards on this page is a real design using the 74F00. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74F00 CX1 pin connected?
The CX1 pins is left unconnected on 80% of them (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 74F00.
How is the 74F00 VCC pin connected?
The VCC pins have a capacitor to GND on 3 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 74F00.
How is the 74F00 OUT_2 pin connected?
The OUT_2 pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 74F00.
What parts are used alongside the 74F00?
The 74F244, 74F245, 74F08, 74F32 and 74F573 appear in the most repositories here.
Which microcontrollers do boards using the 74F00 use?
Most are built on PIC (2).
How big is a typical board using the 74F00?
The median is 193.9 × 170.6 mm, and 40% are two-layer designs.
What is the most popular open source board using the 74F00?
By GitHub stars, Micro 8088 by skiselev, with 414 stars.
Can I simulate one of these boards using the 74F00 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.