5 open source boards using the 74F541
Real designs built with the 74F541, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Omega-Mainboard
skiselev
333.4 × 149.9 mm248 parts2LGPL-3.0456Omega-Mainboard
merlinkv
333.4 × 149.9 mm248 parts2LGPL-3.040Omega-Mainboard
msx-solis
333.4 × 149.9 mm248 parts2LGPL-3.07Omega mainboard1.3eu
msx-solis
333.4 × 149.9 mm252 parts2LGPL-3.05Hydra-16
danstruthers
304.8 × 243.8 mm199 parts6LNo license1
How designs wire the 74F541
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74F541 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
- The G1 pin is tied to GND on 5 of 5 designs.
- The G2 pin is tied to GND on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| G1pin 1 | Connected to: GND 100% | — |
| GNDpin 10 | Connected to: GND 100% | — |
| G2pin 19 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: VCC 100% |
|
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Omega-Mainboard by merlinkv, Omega-Mainboard by msx-solis and Omega mainboard1.3eu by msx-solis.
The 74F541 in open source designs
The gallery holds 5 open source boards using the 74F541 from 5 GitHub repositories; a typical one measures about 333.4 × 149.9 mm and carries around 248 components.
80% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Omega-Mainboard by skiselev.
Parts used alongside the 74F541
What boards using the 74F541 are built for
74F541: common questions
Where can I find a 74F541 reference design?
Each of the 5 boards on this page is a real design using the 74F541. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74F541 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 74F541.
How is the 74F541 G1 pin connected?
The G1 pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74F541.
How is the 74F541 G2 pin connected?
The G2 pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74F541.
What parts are used alongside the 74F541?
The SST39SF040, 74AHCT125, 74AHCT138, 74AHCT32 and 74F245 appear in the most repositories here.
How big is a typical board using the 74F541?
The median is 333.4 × 149.9 mm, and 80% are two-layer designs.
What is the most popular open source board using the 74F541?
By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.
Can I simulate one of these boards using the 74F541 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.