8 open source boards using the YM2151

Real designs built with the YM2151, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the YM2151

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the YM2151 connects to, and the resistors, capacitors and other passives placed on it.

  • The CT1 pin is left unconnected on 5 of 8 designs (a signal on 3).
  • The CT2 pin is left unconnected on 5 of 8 designs (a signal on 3).
GNDpin 1, 11Connected to: GND 100%
IRQpin 2Connected to: Signal 63% · not connected 38%
  • Pull-up to 5V on 38% · 4.7 kΩ (1), 10 kΩ (1), 332 Ω (1)
CT1pin 8Connected to: Not connected 63% · a signal 38%
CT2pin 9Connected to: Not connected 63% · a signal 38%
VCCpin 22Connected to: 5V 100%

18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include YM2151 VGM STM32 by AidanHockey5, OtterX by RetroRemake, AudioYM2151 by ddraig68k and YM2151 Arcade Classic 2 by AidanHockey5.

The YM2151 in open source designs

The gallery holds 8 open source boards using the YM2151 from 8 GitHub repositories; a typical one measures about 128.4 × 87 mm and carries around 53 components.

50% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is YM2151 VGM STM32 by AidanHockey5.

Microcontrollers on boards using the YM2151

What boards using the YM2151 are built for

YM2151: common questions

Where can I find a YM2151 reference design?

Each of the 8 boards on this page is a real design using the YM2151. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the YM2151 CT1 pin connected?

The CT1 pin is left unconnected on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the YM2151.

How is the YM2151 CT2 pin connected?

The CT2 pin is left unconnected on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the YM2151.

What parts are used alongside the YM2151?

The YM3012, LTC6903, TL064, TPA3122D2 and BluePill_STM32F103C appear in the most repositories here.

Which microcontrollers do boards using the YM2151 use?

Most are built on AVR/Arduino (2) and Microchip SAM (1).

How big is a typical board using the YM2151?

The median is 128.4 × 87 mm, and 50% are two-layer designs.

What is the most popular open source board using the YM2151?

By GitHub stars, YM2151 VGM STM32 by AidanHockey5, with 81 stars.

Can I simulate one of these boards using the YM2151 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part