9 open source boards using the 74LS154
Real designs built with the 74LS154, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Archer mainboard
EI2030
227 × 50 mm392 parts4LCERN-OHL-S-2.040Z2 io test01
krzys9876
100.5 × 91.1 mm67 parts2LMIT2Hydra-16
danstruthers
304.8 × 243.8 mm199 parts6LNo license1Ya4b alu
lafehubert
227 × 150.1 mm133 parts2LNo license0SintetizadorGuidoStolfi
ArqueologiaDigital
153.2 × 95.2 mm46 parts2LNo license0JBD8-16
LinuxNerd14
135.5 × 123 mm43 parts2LNo license0Cpu input output control
Trilobyte-CPU
102.6 × 366 mm73 parts2LNo license2Z2 io
krzys9876
104.8 × 101 mm65 parts2LMIT2Z2 io test02
krzys9876
104.8 × 101 mm65 parts2LMIT2
How designs wire the 74LS154
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74LS154 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 12 | Connected to: GND 100% | — |
| VCCpin 24 | Connected to: 5V 100% | — |
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Archer mainboard by EI2030, Z2 io by krzys9876, Cpu input output control by Trilobyte-CPU and Hydra-16 by danstruthers.
The 74LS154 in open source designs
The gallery holds 9 open source boards using the 74LS154 from 7 GitHub repositories; a typical one measures about 135.5 × 101 mm and carries around 67 components.
78% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Archer mainboard by EI2030.
Microcontrollers on boards using the 74LS154
What boards using the 74LS154 are built for
74LS154: common questions
Where can I find a 74LS154 reference design?
Each of the 9 boards on this page is a real design using the 74LS154. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 74LS154?
The 74LS04, 74LS08, 74LS32 and 74LS00 appear in the most repositories here.
Which microcontrollers do boards using the 74LS154 use?
Most are built on NXP (1).
How big is a typical board using the 74LS154?
The median is 135.5 × 101 mm, and 78% are two-layer designs.
What is the most popular open source board using the 74LS154?
By GitHub stars, Archer mainboard by EI2030, with 40 stars.
Can I simulate one of these boards using the 74LS154 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.