V1b

KITTY-6502·hardware·Kicad/mainboard/v1b/v1b.kicad_pcb

V1b PCB layout, top view — open source board by KITTY-6502

About the V1b PCB

V1b is an open source PCB design by KITTY-6502, published on GitHub. It is a 2-layer board measuring 234 × 100 mm, with 133 components from 50 distinct parts.

Other key parts include the 65c02, 74HC14, 74HC590, 74HC4040 and SST39SF. By type, the board carries 46 resistors, 32 ICs, 8 capacitors, 7 connectors, 6 diodes and 2 switches.

From the project

Note: The files here are currently for wip versions of the board

Main components on the V1b

V1b bill of materials (BOM)

133 components, 50 distinct parts.

QtyPartRefs
1
65c02
U1
1
74HC14
U2
3
74HC590
U3, U10, U11
1
74HC4040
U4
3
SST39SF
U5, U8, U29
4
74HC574
U6, U9, U12, U15
2
74HC138
U7, U30
5
74HC165
U13, U22, U23, U24, U25
1
74HC157
U14
1
74HC139
U16
1
74HC153
U17
2
74HC670
U18, U19
1
82C54
U20
1
82C54 (PLCC)
U21
1
74HC00
U26
1
74HC85
U27
1
62256
U28
1
74HCT540
U31
1
74HC273
U32
1
12 Mhz
Y1
Show 30 more
QtyPartRefs
1
KeyIN
J1
1
KeyOUT
J2
1
Barrel_Jack_MountingPin
J3
1
SCART-F
J4
2
Conn_02x22_Odd_Even
J5, J6
1
PJ-325
J8
31
100nF
Cd1, Cd2, Cd3, Cd4, Cd5, Cd6, Cd7, Cd8 +23
1
RESET
SW1
1
SS-12D11-G5
SW2
5
D_Small
D1, D2, D4, D5, D6
1
Power
D3
1
4.7µF
C1
1
33pF
C2
1
47pF
C3
2
100nF
C4, C5
3
10µF
C6, C7, C8
13
3.3kΩ
R1, R2, R3, R8, R9, R10, R11, R12 +5
2
27KΩ
R4, R5
1
5.6KΩ
R6
1
1MΩ
R7
3
1.2KΩ
R14, R16, R39
2
820Ω
R15, R17
1
470Ω
R18
10
20KΩ
R19, R20, R21, R22, R23, R28, R29, R30 +2
6
10KΩ
R24, R25, R26, R33, R34, R35
2
R_Small
R27, R36
2
75Ω
R38, R40
1
680Ω
R41
1
3.3kΩ
RN1
1
100KΩ
RN2

V1b design files

The KiCad project lives in the KITTY-6502/hardware repository on GitHub; these links point at the commit this page was built from.

V1b: common questions

How big is the V1b PCB?

The V1b measures 234 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the V1b?

133 components, from 50 distinct parts. The full bill of materials is listed on this page.

Where can I download the V1b design files?

From the KITTY-6502/hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the V1b design in my own project?

The repository has no license, so all rights stay with KITTY-6502. Use it as a reference, and ask the author before reusing the design.

More boards in hardware