V2a
KITTY-6502·hardware·Kicad/mainboard/v2a/v2a.kicad_pcb
About the V2a PCB
V2a is an open source PCB design by KITTY-6502, published on GitHub. It is a 2-layer board measuring 234 × 100 mm, with 134 components from 51 distinct parts.
Other key parts include the 65c02, 74HC14, 74HC590, 74HC4040 and SST39SF. By type, the board carries 46 resistors, 32 ICs, 8 connectors, 8 capacitors, 6 diodes and 2 switches.
From the project
Note: The files here are currently for wip versions of the board
Main components on the V2a
V2a bill of materials (BOM)
134 components, 51 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 65c02 | PLCC-44_THT-Socket_TWEAK | U1 |
| 1 | 74HC14 | DIP-14_W7.62mm_Socket_LongPads_TWEAK | U2 |
| 3 | 74HC590 | DIP-16_W7.62mm_Socket_LongPads_TWEAK | U3, U10, U11 |
| 1 | 74HC4040 | DIP-16_W7.62mm_Socket_LongPads_TWEAK | U4 |
| 3 | SST39SF | PLCC-32_THT-Socket_TWEAK | U5, U8, U29 |
| 4 | 74HC574 | DIP-20_W7.62mm_Socket_LongPads_TWEAK | U6, U9, U12, U15 |
| 2 | 74HC138 | DIP-16_W7.62mm_Socket_LongPads_TWEAK | U7, U30 |
| 5 | 74HC165 | DIP-16_W7.62mm_Socket_LongPads_TWEAK | U13, U22, U23, U24, U25 |
| 1 | 74HC157 | DIP-16_W7.62mm_Socket_LongPads_TWEAK | U14 |
| 1 | 74HC139 | DIP-16_W7.62mm_Socket_LongPads_TWEAK | U16 |
| 1 | 74HC153 | DIP-16_W7.62mm_Socket_LongPads_TWEAK | U17 |
| 2 | 74HC670 | DIP-16_W7.62mm_Socket_LongPads_TWEAK | U18, U19 |
| 1 | 82C54 | DIP-24_W15.24mm_Socket_TWEAK | U20 |
| 1 | 82C54 (PLCC) | PLCC-28_THT-Socket_TWEAK | U21 |
| 1 | 74HC00 | DIP-14_W7.62mm_Socket_LongPads_TWEAK | U26 |
| 1 | 74HC85 | DIP-16_W7.62mm_Socket_LongPads_TWEAK | U27 |
| 1 | 62256 | DIP-28_W15.24mm_Socket_LongPads_TWEAK | U28 |
| 1 | 74HCT540 | DIP-20_W7.62mm_Socket_LongPads_TWEAK | U31 |
| 1 | 74HC273 | DIP-20_W7.62mm_Socket_LongPads_TWEAK | U32 |
| 1 | MCLK | Crystal_HC49-U_Vertical | Y1 |
Show 31 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | KeyOUT | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Barrel_Jack_MountingPin | BarrelJack_Horizontal | J3 |
| 1 | SCART-F | SCART | J4 |
| 2 | Conn_02x22_Odd_Even | EdgeHeader_2x22_P2.54mm_Vertical | J5, J6 |
| 1 | PJ-325 | Jack_3.5mm_PJ-325 | J8 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 31 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | Cd1, Cd2, Cd3, Cd4, Cd5, Cd6, Cd7, Cd8 +23 |
| 1 | RESET Switch | SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1 |
| 1 | SS-12D11-G5 | SW_Slide_1P2T_CK_OS102011MS2Q | SW2 |
| 5 | 1N4148 | D_DO-34_SOD68_P7.62mm_Horizontal | D1, D2, D4, D5, D6 |
| 1 | Power LED | LED_Rectangular_W5.0mm_H2.0mm | D3 |
| 1 | 4.7µF | CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | 33pF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 47pF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 2 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C4, C5 |
| 3 | 10µF | CP_Radial_D6.3mm_P3.8mm | C6, C7, C8 |
| 6 | 3.3kΩ | R_Horizontal | R1, R3, R37, R42, R43, R44 |
| 7 | 1.5kΩ | R_Horizontal | R2, R8, R9, R10, R11, R12, R13 |
| 2 | 27KΩ | R_Horizontal | R4, R5 |
| 1 | 5.6KΩ | R_Horizontal | R6 |
| 1 | 1MΩ | R_Horizontal | R7 |
| 3 | 1.2KΩ | R_Horizontal | R14, R16, R39 |
| 2 | 820Ω | R_Horizontal | R15, R17 |
| 1 | 470Ω | R_Horizontal | R18 |
| 10 | 20KΩ | RESISTOR VERT_WIDE | R19, R20, R21, R22, R23, R28, R29, R30 +2 |
| 6 | 10KΩ | RESISTOR VERT_WIDE | R24, R25, R26, R33, R34, R35 |
| 2 | 75Ω | RESISTOR VERT_WIDE | R27, R36 |
| 2 | 75Ω | R_Horizontal | R38, R40 |
| 1 | 330Ω | R_Horizontal | R41 |
| 2 | 3.3kΩ | R_Array_SIP9 | RN1, RN2 |
V2a design files
The KiCad project lives in the KITTY-6502/hardware repository on GitHub; these links point at the commit this page was built from.
V2a: common questions
How big is the V2a PCB?
The V2a measures 234 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the V2a?
134 components, from 51 distinct parts. The full bill of materials is listed on this page.
Where can I download the V2a design files?
From the KITTY-6502/hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the V2a design in my own project?
The repository has no license, so all rights stay with KITTY-6502. Use it as a reference, and ask the author before reusing the design.
More boards in hardware
V2b
KITTY-6502
234 × 100 mm134 parts2LNo license0V1c
KITTY-6502
234 × 100 mm134 parts2LNo license0V1b
KITTY-6502
234 × 100 mm133 parts2LNo license0V1a
KITTY-6502
234 × 87.3 mm129 parts2LNo license0V0c
KITTY-6502
234 × 87.3 mm119 parts2LNo license0Keyboard
KITTY-6502
240.3 × 76 mm84 parts2LNo license0Left
KITTY-6502
100 × 31.5 mm3 parts2LNo license0Right
KITTY-6502
100 × 31.5 mm3 parts2LNo license0Sides
KITTY-6502
100 × 31.5 mm3 parts2LNo license0