16 open source boards using the 74HCT540
Real designs built with the 74HCT540, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Omega-Mainboard
skiselev
333.4 × 149.9 mm248 parts2LGPL-3.0456C64 BlinkenDiag
tebl
99.4 × 100 mm64 parts2LCERN-OHL-1.244Omega-Mainboard
merlinkv
333.4 × 149.9 mm248 parts2LGPL-3.040Omega-Mainboard
msx-solis
333.4 × 149.9 mm248 parts2LGPL-3.07AVR/Arduino
AT65C02 Hobby Computer
Kayto
241.3 × 149.9 mm161 parts2LCERN-OHL-1.27Omega mainboard1.3eu
msx-solis
333.4 × 149.9 mm252 parts2LGPL-3.05A1
smaldragon
190 × 100 mm121 parts2LUnlicense2Diagnostic-SIMM-72pin
kulichbulich
108 × 31.8 mm113 parts2LNo license1V1c
KITTY-6502
234 × 100 mm134 parts2LNo license0Diagnostic-SIMM-30pin
kulichbulich
88.9 × 21 mm59 parts2LMIT0V2a
KITTY-6502
234 × 100 mm134 parts2LNo license0InterruptAndKeyboard
daveho
150 × 90 mm37 partsNo license19A2
smaldragon
190 × 100 mm116 parts2LUnlicense2V2b
KITTY-6502
234 × 100 mm134 parts2LNo license0V1b
KITTY-6502
234 × 100 mm133 parts2LNo license0V1a
KITTY-6502
234 × 87.3 mm129 parts2LNo license0
How designs wire the 74HCT540
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the 74HCT540 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: VCC 100% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, C64 BlinkenDiag by tebl, Omega-Mainboard by merlinkv and InterruptAndKeyboard by daveho.
The 74HCT540 in open source designs
The gallery holds 16 open source boards using the 74HCT540 from 11 GitHub repositories; a typical one measures about 234 × 100 mm and carries around 134 components.
100% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is Omega-Mainboard by skiselev.
Parts used alongside the 74HCT540
Microcontrollers on boards using the 74HCT540
What boards using the 74HCT540 are built for
74HCT540: common questions
Where can I find a 74HCT540 reference design?
Each of the 16 boards on this page is a real design using the 74HCT540. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT540 VCC pin?
The VCC pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the 74HCT540.
What parts are used alongside the 74HCT540?
The 74HCT04, 74HCT74, 74AHCT125, 74AHCT138 and 74AHCT32 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT540 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74HCT540?
The median is 234 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74HCT540?
By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.
Can I simulate one of these boards using the 74HCT540 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.