19 open source boards using the 65C02
Real designs built with the 65C02, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
SB-mini-II
simonboak
184.2 × 169.5 mm91 parts4LMIT746502 Blinkenlights Card
acwright
100 × 57.6 mm73 parts2LCERN-OHL-P-2.047AVR/Arduino
6502 ACE Board
acwright
335 × 250 mm183 parts2LCERN-OHL-P-2.012RP2040/RP2350
PZ1 Pico
NollKollTroll
99.1 × 73.7 mm21 parts4LCustom license10V2
durangoretro
177.8 × 130.8 mm148 parts2LNo license0V1c
KITTY-6502
234 × 100 mm134 parts2LNo license06502 Backplane Pro
acwright
100 × 100 mm27 parts2LCERN-OHL-P-2.047V2-eia
durangoretro
177.8 × 130.8 mm148 parts2LNo license0V2a
KITTY-6502
234 × 100 mm134 parts2LNo license06502 VGA Card Pro
acwright
100 × 57.6 mm23 parts2LCERN-OHL-P-2.047ACE RAM Patch
acwright
46 × 22 mm3 parts2LCERN-OHL-P-2.012V2b
KITTY-6502
234 × 100 mm134 parts2LNo license0Full
durangoretro
177.8 × 130.8 mm121 parts2LNo license06502 Storage Card Pro
acwright
100 × 57.6 mm20 parts2LCERN-OHL-P-2.047V1b
KITTY-6502
234 × 100 mm133 parts2LNo license06502 Video Card Pro
acwright
100 × 57.6 mm20 parts2LCERN-OHL-P-2.047V1a
KITTY-6502
234 × 87.3 mm129 parts2LNo license0V0c
KITTY-6502
234 × 87.3 mm119 parts2LNo license0Chihuahua
zuiko21
97.8 × 72.4 mm33 parts2LMIT23
How designs wire the 65C02
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 65C02 connects to, and the resistors, capacitors and other passives placed on it.
- The ML pin is left unconnected on 6 of 7 designs.
- The RDY pin has a pull-up to VCC on 3 of 7 designs, most often 3.3 kΩ (then 1 MΩ).
- The NMI pin has a pull-up to VCC on 3 of 7 designs, most often 3.3 kΩ (then 47 kΩ).
- The VDD pin has a decoupling capacitor on 3 of 7 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RDYpin 2 | Connected to: A connector 71% |
|
| MLpin 5 | Connected to: Not connected 86% | — |
| NMIpin 6 | Connected to: A connector 57% |
|
| VDDpin 8 | Connected to: 5V 86% |
|
| VSSpin 21 | Connected to: GND 83% · a signal 17% | — |
| NCpin 35 | Connected to: Not connected 83% · a signal 17% | — |
| BEpin 36 | Connected to: Signal 67% · 5V 33% |
|
| SOpin 38 | Connected to: Signal 57% · VCC 43% |
|
| RESpin 40 | Connected to: A connector 57%, 65C22 29%, 74HC132 29% |
|
31 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SB-mini-II by simonboak, 6502 Backplane Pro by acwright, Chihuahua by zuiko21 and 6502 ACE Board by acwright.
The 65C02 in open source designs
The gallery holds 19 open source boards using the 65C02 from 7 GitHub repositories; a typical one measures about 177.8 × 100 mm and carries around 119 components.
89% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.
The most starred is SB-mini-II by simonboak.
Parts used alongside the 65C02
Microcontrollers on boards using the 65C02
What boards using the 65C02 are built for
65C02: common questions
Where can I find a 65C02 reference design?
Each of the 19 boards on this page is a real design using the 65C02. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 65C02 ML pin connected?
The ML pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the 65C02.
What pull-up resistor is used on the 65C02 RDY pin?
The RDY pin has a pull-up to VCC on 3 of 7 designs, most often 3.3 kΩ (then 1 MΩ). Counted from the KiCad layouts of 7 open source designs using the 65C02.
What pull-up resistor is used on the 65C02 NMI pin?
The NMI pin has a pull-up to VCC on 3 of 7 designs, most often 3.3 kΩ (then 47 kΩ). Counted from the KiCad layouts of 7 open source designs using the 65C02.
What parts are used alongside the 65C02?
The 74HC00, 74HC138, 62256, 74HC157 and 74HC166 appear in the most repositories here.
Which microcontrollers do boards using the 65C02 use?
Most are built on RP2040/RP2350 (2) and AVR/Arduino (1).
How big is a typical board using the 65C02?
The median is 177.8 × 100 mm, and 89% are two-layer designs.
What is the most popular open source board using the 65C02?
By GitHub stars, SB-mini-II by simonboak, with 74 stars.
Can I simulate one of these boards using the 65C02 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.