20 open source boards using the 74HC153
Real designs built with the 74HC153, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Stargate
leomanes
335 × 218.6 mm274 parts2LGPL-3.018TIM-011B
Board-Folk
232.8 × 204.2 mm149 parts2LNo license8ByteFrost
gilkeidar
215 × 140 mm36 parts2LNo license5CPU2908CP4
m-okada
240 × 195 mm590 parts2LNo license3AVR/Arduino
Datakortet kontrollpanelen
BathroomEpiphanies
99.1 × 99.1 mm204 partsGPL-3.02Td4cpu
nikachu2012
144 × 100 mm90 parts2LNo license1V1c
KITTY-6502
234 × 100 mm134 parts2LNo license0- schematic only · 558 parts
Breadboarding
MihrimatriX
558 partsMIT0 CPU2908C
m-okada
240 × 180 mm585 parts2LNo license32bit cpu
naoto64
80 × 75 mm35 parts2LMIT2V2a
KITTY-6502
234 × 100 mm134 parts2LNo license0CPU2908C3
m-okada
240 × 180 mm581 parts2LNo license3Alu advanced
ifilot
101.6 × 55.9 mm51 parts2LCERN-OHL-S-2.02V2b
KITTY-6502
234 × 100 mm134 parts2LNo license074HCT6526 Board 2
dmolinagarcia
100 × 100 mm64 parts4LNo license14CPU2908C3bak
m-okada
240 × 180 mm580 parts2LNo license3V1b
KITTY-6502
234 × 100 mm133 parts2LNo license074HCT6526 Board 1
dmolinagarcia
100 × 100 mm62 parts4LNo license14V1a
KITTY-6502
234 × 87.3 mm129 parts2LNo license0Spi
scefrom
135.9 × 53.3 mm45 parts2LCustom license2
How designs wire the 74HC153
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the 74HC153 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 9 of 11 designs, most often 100 nF.
- The EA pin is tied to GND on 9 of 11 designs (a signal on 2).
- The EB pin is tied to GND on 9 of 11 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| EApin 1 | Connected to: GND 82% · a signal 18% | — |
| GNDpin 8 | Connected to: GND 100% | — |
| EBpin 15 | Connected to: GND 82% · a signal 18% | — |
| VCCpin 16 | Connected to: 5V 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Stargate by leomanes, 74HCT6526 Board 1 by dmolinagarcia, TIM-011B by Board-Folk and ByteFrost by gilkeidar.
The 74HC153 in open source designs
The gallery holds 20 open source boards using the 74HC153 from 12 GitHub repositories; a typical one measures about 234 × 100 mm and carries around 134 components.
89% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Stargate by leomanes.
Parts used alongside the 74HC153
Microcontrollers on boards using the 74HC153
What boards using the 74HC153 are built for
74HC153: common questions
Where can I find a 74HC153 reference design?
Each of the 20 boards on this page is a real design using the 74HC153. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC153 VCC pin?
The VCC pin has a decoupling capacitor on 9 of 11 designs, most often 100 nF. Counted from the KiCad layouts of 11 open source designs using the 74HC153.
How is the 74HC153 EA pin connected?
The EA pin is tied to GND on 9 of 11 designs (a signal on 2). Counted from the KiCad layouts of 11 open source designs using the 74HC153.
How is the 74HC153 EB pin connected?
The EB pin is tied to GND on 9 of 11 designs (a signal on 2). Counted from the KiCad layouts of 11 open source designs using the 74HC153.
What parts are used alongside the 74HC153?
The 74HC32, 74HC00, 74HC157, 74HC74 and 74HC02 appear in the most repositories here.
Which microcontrollers do boards using the 74HC153 use?
Most are built on AVR/Arduino (1) and ESP8266 (1).
How big is a typical board using the 74HC153?
The median is 234 × 100 mm, and 89% are two-layer designs.
What is the most popular open source board using the 74HC153?
By GitHub stars, Stargate by leomanes, with 18 stars.
Can I simulate one of these boards using the 74HC153 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.