15 open source boards using the 74HC85
Real designs built with the 74HC85, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
CFT Processor Board 0
alexiosc
233.4 × 280 mm274 parts2LGPL-3.06Internal sdcard interface
ifilot
219 × 88 mm77 parts2LNo license3V2
durangoretro
177.8 × 130.8 mm148 parts2LNo license0V1c
KITTY-6502
234 × 100 mm134 parts2LNo license0Philips P2000T SD-CARD SLOT2 cartridge
ifilot
85.1 × 100 mm62 parts4LNo license3V2-eia
durangoretro
177.8 × 130.8 mm148 parts2LNo license0V2a
KITTY-6502
234 × 100 mm134 parts2LNo license0Cft ctl
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06V2b
KITTY-6502
234 × 100 mm134 parts2LNo license0Full
durangoretro
177.8 × 130.8 mm121 parts2LNo license0Cft ctl dip
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06V1b
KITTY-6502
234 × 100 mm133 parts2LNo license0Control
89Mods
209.6 × 108.5 mm81 parts4LMIT2V1a
KITTY-6502
234 × 87.3 mm129 parts2LNo license0V0c
KITTY-6502
234 × 87.3 mm119 parts2LNo license0
How designs wire the 74HC85
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HC85 connects to, and the resistors, capacitors and other passives placed on it.
- The IA=B pin is tied to 5V on 4 of 5 designs.
- The B3 pin is tied to GND on 3 of 5 designs.
- The IA<B pin is tied to GND on 3 of 5 designs.
- The IA>B pin is tied to GND on 3 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| B3pin 1 | Connected to: GND 60% · 5V 20% · a signal 20% | — |
| IA<Bpin 2 | Connected to: GND 60% · 5V 20% · a signal 20% | — |
| IA=Bpin 3 | Connected to: 5V 80% · a signal 20% | — |
| IA>Bpin 4 | Connected to: GND 60% · 5V 20% · a signal 20% | — |
| OA>Bpin 5 | Connected to: Not connected 60% · a signal 40% | — |
| GNDpin 8 | Connected to: GND 80% · a signal 20% | — |
| VCCpin 16 | Connected to: 5V 100% |
|
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CFT Processor Board 0 by alexiosc, Internal sdcard interface by ifilot, Control by 89Mods and Full by durangoretro.
The 74HC85 in open source designs
The gallery holds 15 open source boards using the 74HC85 from 5 GitHub repositories; a typical one measures about 219 × 100 mm and carries around 134 components.
73% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is CFT Processor Board 0 by alexiosc.
Parts used alongside the 74HC85
What boards using the 74HC85 are built for
74HC85: common questions
Where can I find a 74HC85 reference design?
Each of the 15 boards on this page is a real design using the 74HC85. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74HC85 IA=B pin connected?
The IA=B pin is tied to 5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HC85.
How is the 74HC85 B3 pin connected?
The B3 pin is tied to GND on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HC85.
How is the 74HC85 IA<B pin connected?
The IA<B pin is tied to GND on 3 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HC85.
What parts are used alongside the 74HC85?
The 74HC00, 74HC574, 74HC74, 74HC02 and 74HC138 appear in the most repositories here.
How big is a typical board using the 74HC85?
The median is 219 × 100 mm, and 73% are two-layer designs.
What is the most popular open source board using the 74HC85?
By GitHub stars, CFT Processor Board 0 by alexiosc, with 6 stars.
Can I simulate one of these boards using the 74HC85 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.