SensactHsLed2 - Kopie
klaus-liebler·sensact·pcb/sensactHsLed2/sensactHsLed2 - Kopie.kicad_pcb
About the SensactHsLed2 - Kopie PCB
SensactHsLed2 - Kopie is an open source ESP32 PCB design by klaus-liebler, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 90 × 47.5 mm, with 117 components from 83 distinct parts.
Its main chip is the TPS92200D2DDCR, from the ESP32 family. Other key parts include the MAX98357_MODULE, NRF24L01_BREAKOUT_SMD, AMS1117-3.3, ZXLD1362 and SN65HVD230. By type, the board carries 37 resistors, 19 capacitors, 14 jumpers, 10 ICs, 10 connectors and 8 switches.
It belongs with the iot & wireless designs in this gallery.
From the project
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier Namespaces haben ihren eigenen counter. Dieser beginnt bei 0x0 m
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier Namespaces haben ihren eigenen counter. Dieser beginnt bei 0x0 mit der ersten versendeten Nachricht und läuft nach 255 (0xFF) wieder auf 0. Die Ready-Nachricht wird immer mit counter=0x0 übertragen. Sie darf verwendet werden, um die Kommunikations-Session abzubrechen und die counter neu zu starten. Die counter representieren gemeinsames Wissen von Master und Slave REQEST (0b00)…
Main components on the SensactHsLed2 - Kopie
SensactHsLed2 - Kopie bill of materials (BOM)
117 components, 83 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX98357_MODULE SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | TPS92200D2DDCR ESP32-WROOM-32 | ESP32-WROOM-32 | U2 |
| 1 | TPS92200D2DDCR MP4420 | TSOT-23-8 | U3 |
| 1 | NRF24L01_BREAKOUT_SMD PCA9685PW | TSSOP-28_4.4x9.7mm_P0.65mm | U4 |
| 1 | AMS1117-3.3 ZXLD1362 | SOT-23-5 | U5 |
| 1 | ZXLD1362 | SOT-23-5 | U6 |
| 1 | SN65HVD230 ZXLD1362 | SOT-23-5 | U7 |
| 1 | EL817 ZXLD1362 | SOT-23-5 | U8 |
| 1 | TPS54202DDC ZXLD1362 | SOT-23-5 | U9 |
| 1 | DS18B20 ZXLD1362 | SOT-23-5 | U10 |
| 2 | AO3400A | SOT-23 | Q1, Q3 |
| 1 | LH114 | FP-114 13pol | X1 |
| 1 | PROG | IDC_2x03_P1.27mm_Vertical | J1 |
| 1 | EXT | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 3 | LED1+2 | PhoenixContact_MC_1,5_4-G-3.81_1x04_P3.81mm_Horizontal | J3, J4, J5 |
| 1 | Conn_01x02 | PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J6 |
| 1 | EXT1 SensactBusConnector | IDC-Header_2x05_P2.54mm_Horizontal | J7 |
| 1 | POWER+CAN | PhoenixContact_MC_1,5_4-G-3.81_1x04_P3.81mm_Horizontal | J8 |
| 1 | HMI | Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J9 |
| 1 | LED1 Conn_01x10 | Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J10 |
Show 63 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Buzzer | XDCR_CMT-7525-80-SMT-TR | BZ1 |
| 6 | 3W | Jumper 2x2.54 | JP1, JP2, JP3, JP4, JP5, JP6 |
| 1 | LED 0+6 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP7 |
| 1 | LED 1+7 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP8 |
| 1 | LED 2+11 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP9 |
| 1 | LED 3+10 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP10 |
| 1 | LED 4+9 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP11 |
| 1 | LED 5+8 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP12 |
| 2 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP13, JP14 |
| 1 | ALPS_SKRHABE010 | Alps_SKRHABE010 | S1 |
| 1 | Reset | Button_2x4x3,5_handsolder | SW1 |
| 1 | CAN TERM ON | SW_SPDT_PCM12_handsolder | SW2 |
| 1 | INT 3V3 EXT | SW_SPDT_PCM12_handsolder | SW3 |
| 1 | A0 1 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | SW4 |
| 1 | A1 1 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | SW5 |
| 1 | A2 1 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | SW6 |
| 1 | Clear | Button_2x4x3,5_handsolder | SW7 |
| 1 | Thermistor_NTC | C_Disc_D3.4mm_W2.1mm_P2.50mm | TH1 |
| 1 | NUP2105L | SOT-23 | D1 |
| 3 | SM4007PL D | D_SMA | D2, D3, D4 |
| 2 | D | D_SMA | D5, D6 |
| 1 | INFO1 D | D_SMA | D7 |
| 1 | 22UH 10uH | L_Abracon_ASPI-0630LR | L1 |
| 1 | 22UH 150u | L_Taiyo-Yuden_NR-80xx | L2 |
| 1 | 10UH 150u | L_Taiyo-Yuden_NR-80xx | L3 |
| 4 | 150u | L_Taiyo-Yuden_NR-80xx | L4, L5, L6, L7 |
| 1 | C15008 22u | C_0603_1608Metric | C1 |
| 1 | C15008 u1 | C_0603_1608Metric | C2 |
| 4 | u1 | C_0603_1608Metric | C3, C4, C7, C8 |
| 2 | 10u | C_1206_3216Metric | C5, C6 |
| 3 | C49678 u1 | C_0603_1608Metric | C9, C18, C19 |
| 1 | 10U 22u | C_0603_1608Metric | C10 |
| 1 | 22u | C_0603_1608Metric | C11 |
| 2 | 10U 4u7/63V | C_2220_5650Metric | C12, C14 |
| 2 | C49678 4u7/63V | C_2220_5650Metric | C13, C17 |
| 1 | C1525 4u7/63V | C_2220_5650Metric | C15 |
| 1 | 22U 4u7/63V | C_2220_5650Metric | C16 |
| 3 | 1k | R_0603_1608Metric | R1, R27, R36 |
| 1 | 0R15 4k7 | R_0603_1608Metric | R2 |
| 1 | 10K k12 | R_0603_1608Metric | R3 |
| 1 | 22K 1M | R_0603_1608Metric | R4 |
| 1 | 22R | R_0603_1608Metric | R5 |
| 1 | 51k | R_0603_1608Metric | R6 |
| 1 | 1M | R_0603_1608Metric | R7 |
| 1 | 39k | R_0603_1608Metric | R8 |
| 4 | 10k | R_0603_1608Metric | R9, R15, R19, R39 |
| 1 | 15K 0R1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 10K 10k | R_0603_1608Metric | R11 |
| 1 | K12 0R1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 0R15 10k | R_0603_1608Metric | R13 |
| 1 | K47 0R1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 3K3 0R1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 6K8 10k | R_0603_1608Metric | R17 |
| 1 | 6K8 0R1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 5 | 0R1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R21, R22, R23, R24 |
| 2 | 4K7 0R1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R26 |
| 1 | 3K3 k1 | R_0603_1608Metric | R28 |
| 1 | 10K 22k | R_0603_1608Metric | R29 |
| 1 | 470K 22k | R_0603_1608Metric | R30 |
| 1 | 470K 10k | R_0603_1608Metric | R31 |
| 1 | 4k7 | R_0603_1608Metric | R32 |
| 1 | K47 2k2 | R_0603_1608Metric | R33 |
| 2 | K47 1k | R_0603_1608Metric | R34, R37 |
SensactHsLed2 - Kopie design files
The KiCad project lives in the klaus-liebler/sensact repository on GitHub; these links point at the commit this page was built from.
SensactHsLed2 - Kopie: common questions
What microcontroller does the SensactHsLed2 - Kopie use?
The SensactHsLed2 - Kopie is built around the TPS92200D2DDCR, from the ESP32 family.
How big is the SensactHsLed2 - Kopie PCB?
The SensactHsLed2 - Kopie measures 90 × 47.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SensactHsLed2 - Kopie?
117 components, from 83 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SensactHsLed2 - Kopie design files?
From the klaus-liebler/sensact repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the SensactHsLed2 - Kopie design in my own project?
Yes, under the terms of its Apache-2.0 license, which klaus-liebler chose for the repository.
Can I test firmware for the SensactHsLed2 - Kopie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in sensact
ESP32
SensactHs
klaus-liebler
100 × 86.5 mm317 parts2LApache-2.04ESP32
SensactHsIO5
klaus-liebler
90 × 67.5 mm213 parts2LApache-2.04ESP32
SensactHsIO4
klaus-liebler
90 × 74.6 mm196 parts2LApache-2.04ESP32
SensactHsIO3
klaus-liebler
90 × 53 mm187 parts2LApache-2.04ESP32
SensactUp4
klaus-liebler
70 × 70 mm145 parts2LApache-2.04SensactInpExt2
klaus-liebler
90 × 66 mm139 parts2LApache-2.04ESP32
SensactOutdoor
klaus-liebler
100 × 91.6 mm129 parts2LApache-2.04ESP32
SensactHsNano2
klaus-liebler
90 × 56.5 mm128 parts2LApache-2.04ESP32
SensactHsNano3
klaus-liebler
90 × 56 mm122 parts2LApache-2.04ESP32
SensactHsLed2
klaus-liebler
90 × 74.7 mm116 parts2LApache-2.04ESP32
SensactHs modular esp32
klaus-liebler
100 × 86.5 mm25 parts2LApache-2.04
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k