SensactHsIO5
klaus-liebler·sensact·pcb/sensactHsIO5/sensactHsIO5.kicad_pcb
About the SensactHsIO5 PCB
SensactHsIO5 is an open source ESP32 PCB design by klaus-liebler, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 90 × 67.5 mm, with 213 components from 97 distinct parts.
Its main chip is the AMS1117-3.3, from the ESP32 family. Other key parts include the MAX98357_MODULE, TPS92200D2DDCR, NRF24L01_BREAKOUT_SMD, MAX3485 and SN65HVD230. By type, the board carries 83 resistors, 32 test points, 30 capacitors, 20 jumpers, 20 diodes and 13 ICs.
It belongs with the iot & wireless designs in this gallery.
From the project
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier Namespaces haben ihren eigenen counter. Dieser beginnt bei 0x0 m
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier Namespaces haben ihren eigenen counter. Dieser beginnt bei 0x0 mit der ersten versendeten Nachricht und läuft nach 255 (0xFF) wieder auf 0. Die Ready-Nachricht wird immer mit counter=0x0 übertragen. Sie darf verwendet werden, um die Kommunikations-Session abzubrechen und die counter neu zu starten. Die counter representieren gemeinsames Wissen von Master und Slave REQEST (0b00)…
Main components on the SensactHsIO5
SensactHsIO5 bill of materials (BOM)
213 components, 97 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX98357_MODULE LM358 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | TPS92200D2DDCR SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TPS92200D2DDCR RY8310 | SOT-23-6 | U3 |
| 1 | NRF24L01_BREAKOUT_SMD L78L15_SOT89 | SOT-89-3_Handsoldering | U4 |
| 1 | AMS1117-3.3 ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1U | U5 |
| 1 | MAX3485 | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | SN65HVD230 SRV05-4 | SOT-23-6 | U7 |
| 1 | EL817 ULN2803A | SOIC-18W_7.5x11.6mm_P1.27mm | U8 |
| 1 | TPS54202DDC ULN2803A | SOIC-18W_7.5x11.6mm_P1.27mm | U9 |
| 1 | DS18B20 SRV05-4 | SOT-23-6-spezial | U10 |
| 1 | ESP32-S3-WROOM-1 SRV05-4 | SOT-23-6-spezial | U11 |
| 2 | SRV05-4 | SOT-23-6-spezial | U13, U15 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12_smaller | J1 |
| 1 | PROG | IDC_2x03_P1.27mm_Vertical | J2 |
| 1 | CAN+485 | PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal_smallerCourtyard | J3 |
| 2 | Conn_01x08 | KF141R-8p | J4, J5 |
| 1 | Bus | IDC-Header_2x05_P2.54mm_Horizontal_tightCrtYd | J8 |
| 1 | 24V | PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal | J9 |
| 2 | IO15 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP1, JP32 |
| 1 | LED_PWR | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
Show 77 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IO00 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP5 |
| 1 | IO02 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP6 |
| 1 | IO04 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP7 |
| 1 | IO06 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP8 |
| 1 | IO01 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP13 |
| 1 | IO03 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP14 |
| 1 | IO05 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP15 |
| 1 | IO07 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP16 |
| 1 | IO08 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP21 |
| 1 | IO10 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP22 |
| 1 | IO12 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP23 |
| 1 | IO14 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP24 |
| 1 | IO09 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP29 |
| 1 | IO11 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP30 |
| 1 | IO13 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_smaller | JP31 |
| 1 | SCL | SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP33 |
| 1 | SDA | SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP34 |
| 1 | Reset | Button_2x4x3,5_handsolder | SW1 |
| 1 | Prog | Button_2x4x3,5_handsolder | SW2 |
| 1 | TERM ON | SW_SPDT_PCM12_handsolder | SW3 |
| 2 | SW_DIP_x08 | SW_DIP_SPSTx08_Piano | SW4, SW5 |
| 1 | OFF TERM ON | SW_SPDT_PCM12_handsolder | SW6 |
| 1 | SW_SPDT_with_Case | SW_SPDT_PCM12_handsolder | SW7 |
| 1 | LED0 TestPoint | SolderJumper-3_forMCConnector | TP3 |
| 31 | TestPoint | SolderJumper-3_forMCConnector | TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11 +23 |
| 1 | NUP2105 | SOT-23_Handsoldering | D1 |
| 1 | SM4007PL PSM712 | SOT-23_Handsoldering | D2 |
| 1 | SM4007PL D | D_SOD-123 | D3 |
| 1 | SM4007PL 3V | D_SOD-123 | D4 |
| 7 | LED | LED_1606 | D5, D6, D11, D17, D18, D19, D20 |
| 1 | INFO1 LED | LED_1606 | D7 |
| 1 | NUP2105 LED | LED_1606 | D8 |
| 1 | 1N5819WS LED | LED_1606 | D9 |
| 1 | SM4007PL LED | LED_1606 | D10 |
| 5 | LED0 LED | LED_1606 | D12, D13, D14, D15, D16 |
| 1 | 22UH 4u7 | L_Abracon_ASPI-0630LR | L1 |
| 1 | C15008 10u | C_1206_3216Metric | C1 |
| 2 | C15008 u1 | C_0402_1005Metric | C2, C20 |
| 1 | 10u | C_1206_3216Metric | C3 |
| 4 | u1 | C_0402_1005Metric | C4, C5, C11, C29 |
| 1 | u1 | C_0603_1608Metric | C6 |
| 1 | 22u | C_0603_1608Metric | C7 |
| 1 | u47 | C_0805_2012Metric | C8 |
| 8 | C49678 u1 | C_0402_1005Metric | C9, C17, C18, C19, C25, C27, C28, C30 |
| 1 | 10U u1 | C_0603_1608Metric | C10 |
| 1 | 10U 22u | C_0603_1608Metric | C12 |
| 1 | C49678 22u | C_0603_1608Metric | C13 |
| 5 | 10U u1 | C_0402_1005Metric | C14, C21, C22, C24, C26 |
| 1 | C1525 u1 | C_0402_1005Metric | C15 |
| 1 | 22U u1 | C_0402_1005Metric | C16 |
| 1 | 22N/250V u1 | C_0402_1005Metric | C23 |
| 2 | 4k7 | R_0402_1005Metric | R1, R7 |
| 1 | 0R15 4k7 | R_0402_1005Metric | R2 |
| 1 | 10K k1 | R_0402_1005Metric | R3 |
| 1 | 22K 10k | R_0402_1005Metric | R4 |
| 15 | 10k | R_0402_1005Metric | R5, R9, R32, R41, R42, R43, R44, R53 +7 |
| 1 | 22k | R_0402_1005Metric | R8 |
| 1 | 15K 10k | R_0402_1005Metric | R10 |
| 1 | 10K K12 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | K12 47k | R_0402_1005Metric | R12 |
| 1 | 0R15 15k | R_0402_1005Metric | R13 |
| 1 | K47 22k | R_0402_1005Metric | R14 |
| 1 | 5k1 | R_0402_1005Metric | R15 |
| 1 | 3K3 5k1 | R_0402_1005Metric | R16 |
| 2 | 6K8 1k | R_0603_1608Metric | R17, R18 |
| 1 | K12 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19 |
| 1 | 4k7 | R_1206_3216Metric | R20 |
| 13 | 10R | R_0402_1005Metric | R21, R22, R23, R24, R35, R36, R45, R46 +5 |
| 2 | 4K7 k1 | R_0402_1005Metric | R25, R26 |
| 11 | k1 | R_0402_1005Metric | R27, R39, R40, R49, R50, R51, R52, R61 +3 |
| 1 | 3K3 k1 | R_0402_1005Metric | R28 |
| 1 | 10K 10k | R_0402_1005Metric | R29 |
| 2 | 470K 10k | R_0402_1005Metric | R30, R31 |
| 2 | K47 10R | R_0402_1005Metric | R33, R34 |
| 2 | K47 k1 | R_0402_1005Metric | R37, R38 |
| 1 | 10K 10R | R_0402_1005Metric | R47 |
| 16 | k22 | R_0402_1005Metric | R69, R70, R71, R72, R73, R74, R75, R76 +8 |
SensactHsIO5 design files
The KiCad project lives in the klaus-liebler/sensact repository on GitHub; these links point at the commit this page was built from.
SensactHsIO5: common questions
What microcontroller does the SensactHsIO5 use?
The SensactHsIO5 is built around the AMS1117-3.3, from the ESP32 family.
How big is the SensactHsIO5 PCB?
The SensactHsIO5 measures 90 × 67.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SensactHsIO5?
213 components, from 97 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SensactHsIO5 design files?
From the klaus-liebler/sensact repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SensactHsIO5 design in my own project?
Yes, under the terms of its Apache-2.0 license, which klaus-liebler chose for the repository.
Can I test firmware for the SensactHsIO5 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in sensact
ESP32
SensactHs
klaus-liebler
100 × 86.5 mm317 parts2LApache-2.04ESP32
SensactHsIO4
klaus-liebler
90 × 74.6 mm196 parts2LApache-2.04ESP32
SensactHsIO3
klaus-liebler
90 × 53 mm187 parts2LApache-2.04ESP32
SensactUp4
klaus-liebler
70 × 70 mm145 parts2LApache-2.04SensactInpExt2
klaus-liebler
90 × 66 mm139 parts2LApache-2.04ESP32
SensactOutdoor
klaus-liebler
100 × 91.6 mm129 parts2LApache-2.04ESP32
SensactHsNano2
klaus-liebler
90 × 56.5 mm128 parts2LApache-2.04ESP32
SensactHsNano3
klaus-liebler
90 × 56 mm122 parts2LApache-2.04ESP32
SensactHsLed2 - Kopie
klaus-liebler
90 × 47.5 mm117 parts2LApache-2.04ESP32
SensactHsLed2
klaus-liebler
90 × 74.7 mm116 parts2LApache-2.04ESP32
SensactHs modular esp32
klaus-liebler
100 × 86.5 mm25 parts2LApache-2.04
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k