SensactHsNano2
klaus-liebler·sensact·pcb/sensactHsNano2/sensactHsNano2.kicad_pcb
About the SensactHsNano2 PCB
SensactHsNano2 is an open source ESP32 PCB design by klaus-liebler, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 90 × 56.5 mm, with 128 components from 97 distinct parts.
Its main chip is the TPS92200D2DDCR, from the ESP32 family. Other key parts include the MAX98357_MODULE, NRF24L01_BREAKOUT_SMD, AMS1117-3.3, MAX3485 and SN65HVD230. By type, the board carries 48 capacitors, 39 resistors, 12 ICs, 10 connectors, 6 inductors and 4 switches.
It belongs with the iot & wireless designs in this gallery.
From the project
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier Namespaces haben ihren eigenen counter. Dieser beginnt bei 0x0 m
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier Namespaces haben ihren eigenen counter. Dieser beginnt bei 0x0 mit der ersten versendeten Nachricht und läuft nach 255 (0xFF) wieder auf 0. Die Ready-Nachricht wird immer mit counter=0x0 übertragen. Sie darf verwendet werden, um die Kommunikations-Session abzubrechen und die counter neu zu starten. Die counter representieren gemeinsames Wissen von Master und Slave REQEST (0b00)…
Main components on the SensactHsNano2
SensactHsNano2 bill of materials (BOM)
128 components, 97 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX98357_MODULE TAS5805M | HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x5.4mm_ThermalVias | U1 |
| 1 | TPS92200D2DDCR LAN8720A | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U2 |
| 1 | TPS92200D2DDCR ESP32 | ESP32-WROOM-32U | U3 |
| 1 | NRF24L01_BREAKOUT_SMD DS2482 | SOIC-8_3.9x4.9mm_Pitch1.27mm_handsolder | U4 |
| 1 | AMS1117-3.3 SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | MAX3485 | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | SN65HVD230 RY8310 | SOT-23-6 | U7 |
| 1 | EL817 LM358 | SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | TPS54202DDC MCP4728 | MSOP-10_3x3mm_P0.5mm | U9 |
| 1 | DS18B20 INA219AxD | SOIC-8_3.9x4.9mm_Pitch1.27mm_handsolder | U10 |
| 1 | ESP32-S3-WROOM-1 L78L15_SOT89 | SOT-89-3_Handsoldering | U11 |
| 1 | CH340K | SSOP-10_3.9x4.9mm_P1.00mm_EP | U12 |
| 2 | BC817 | SOT-23_smaller | Q1, Q2 |
| 1 | 50MHz | Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm | X1 |
| 1 | HMI | Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J1 |
| 1 | SensactBusConnector | IDC-Header_2x05_P2.54mm_Horizontal_tightCrtYd | J2 |
| 1 | CAN+485 | PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal | J3 |
| 1 | HR911105A | RJ45_HANRUN_HR911105A | J4 |
| 1 | Audio | PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal | J5 |
| 1 | OneWire | PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal | J6 |
Show 77 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EXT1 PROG | USB_C_Receptacle_HRO_TYPE-C-31-M-12_smaller | J7 |
| 1 | Conn_01x10 | PinHeader_2x05_P2.54mm_Vertical | J8 |
| 1 | 24V | PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J9 |
| 1 | LED1 I2S_EXT | PinHeader_1x08_P1.27mm_Vertical | J10 |
| 1 | RS485_BUZZER | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | RS485_BACKLIGHT | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | TERM ON | SW_SPDT_PCM12_handsolder | SW1 |
| 1 | OFF TERM ON | SW_SPDT_PCM12_handsolder | SW2 |
| 1 | Reset | Button_2x4x3,5_handsolder | SW3 |
| 1 | PROG_PWR | SW_SPDT_PCM12_handsolder | SW4 |
| 1 | PSM712 | SOT-23_Handsoldering | D1 |
| 1 | SM4007PL 2A | D_SMB_Handsoldering | D2 |
| 1 | SM4007PL NUP2105 | SOT-23_Handsoldering | D3 |
| 1 | Bead | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 2 | 22UH 10u | L_1040 | L1, L2 |
| 1 | 10UH 10u | L_1040 | L3 |
| 1 | 10u | L_1040 | L4 |
| 1 | 4u7 | L_Abracon_ASPI-0630LR | L5 |
| 1 | C15008 470u | CP_Radial_D10.0mm_P3.50mm | C1 |
| 1 | C15008 4u7 | C_0402_1005Metric | C2 |
| 1 | 22u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C3 |
| 8 | u1 | C_0402_1005Metric | C4, C40, C41, C42, C44, C45, C46, C47 |
| 3 | u1 | C_0603_1608Metric | C5, C36, C37 |
| 2 | 1u | C_0402_1005Metric | C6, C7 |
| 1 | 470u | CP_Radial_D10.0mm_P3.50mm | C8 |
| 1 | C49678 22u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C9 |
| 1 | 10U u1 | C_0603_1608Metric | C10 |
| 1 | u22 | C_0603_1608Metric | C11 |
| 2 | 10U u22 | C_0603_1608Metric | C12, C14 |
| 1 | C49678 u22 | C_0603_1608Metric | C13 |
| 1 | C1525 u68 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15 |
| 1 | 22U u68 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C16 |
| 2 | C49678 u68 | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C17, C18 |
| 1 | C49678 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19 |
| 1 | C15008 u1 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20 |
| 3 | 10U u1 | C_0402_1005Metric | C21, C22, C31 |
| 1 | 22N/250V n47 | C_0402_1005Metric | C23 |
| 1 | 10U 1u | C_0402_1005Metric | C24 |
| 4 | C49678 u1 | C_0402_1005Metric | C25, C27, C28, C32 |
| 1 | 10U 4u7 | C_0402_1005Metric | C26 |
| 1 | 4u7 | C_0402_1005Metric | C29 |
| 1 | C49678 22n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C30 |
| 1 | 56P 22u | C_0603_1608Metric | C33 |
| 2 | 22U 10u | C_1206_3216Metric | C34, C35 |
| 2 | 22u | C_0603_1608Metric | C38, C39 |
| 1 | u47 | C_0805_2012Metric | C43 |
| 1 | u1 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C48 |
| 2 | 4k7 | R_0402_1005Metric | R1, R6 |
| 1 | 0R15 r1 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 2 | 10K 4k7 | R_0402_1005Metric | R3, R47 |
| 1 | 22K 4k7 | R_0402_1005Metric | R4 |
| 1 | 1K5 | R_0402_1005Metric | R5 |
| 2 | K12 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R23 |
| 2 | 33R | R_0402_1005Metric | R8, R9 |
| 1 | 15K 33R | R_0402_1005Metric | R10 |
| 1 | 10K 1k | R_0402_1005Metric | R11 |
| 1 | K12 33R | R_0402_1005Metric | R12 |
| 1 | 0R15 1k | R_0603_1608Metric | R13 |
| 1 | K47 33R | R_0402_1005Metric | R14 |
| 2 | 49R9 | R_0603_1608Metric | R15, R19 |
| 1 | 3K3 12K1 | R_0402_1005Metric | R16 |
| 2 | 6K8 49R9 | R_0603_1608Metric | R17, R18 |
| 2 | K33 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R21 |
| 1 | 1k | R_0603_1608Metric | R22 |
| 1 | 47k | R_0402_1005Metric | R24 |
| 1 | 4K7 10k | R_0402_1005Metric | R25 |
| 1 | 4K7 15k | R_0402_1005Metric | R26 |
| 1 | 5k1 | R_0402_1005Metric | R27 |
| 1 | 3K3 1k | R_0402_1005Metric | R28 |
| 1 | 10K 10k | R_0402_1005Metric | R29 |
| 1 | 470K 5k1 | R_0402_1005Metric | R30 |
| 1 | 470K 10k | R_0402_1005Metric | R31 |
| 3 | 10k | R_0402_1005Metric | R32, R41, R48 |
| 1 | K47 4k7 | R_0402_1005Metric | R33 |
| 1 | K47 1k | R_0402_1005Metric | R34 |
| 2 | 22k | R_0402_1005Metric | R51, R52 |
SensactHsNano2 design files
The KiCad project lives in the klaus-liebler/sensact repository on GitHub; these links point at the commit this page was built from.
SensactHsNano2: common questions
What microcontroller does the SensactHsNano2 use?
The SensactHsNano2 is built around the TPS92200D2DDCR, from the ESP32 family.
How big is the SensactHsNano2 PCB?
The SensactHsNano2 measures 90 × 56.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SensactHsNano2?
128 components, from 97 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SensactHsNano2 design files?
From the klaus-liebler/sensact repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SensactHsNano2 design in my own project?
Yes, under the terms of its Apache-2.0 license, which klaus-liebler chose for the repository.
Can I test firmware for the SensactHsNano2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in sensact
ESP32
SensactHs
klaus-liebler
100 × 86.5 mm317 parts2LApache-2.04ESP32
SensactHsIO5
klaus-liebler
90 × 67.5 mm213 parts2LApache-2.04ESP32
SensactHsIO4
klaus-liebler
90 × 74.6 mm196 parts2LApache-2.04ESP32
SensactHsIO3
klaus-liebler
90 × 53 mm187 parts2LApache-2.04ESP32
SensactUp4
klaus-liebler
70 × 70 mm145 parts2LApache-2.04SensactInpExt2
klaus-liebler
90 × 66 mm139 parts2LApache-2.04ESP32
SensactOutdoor
klaus-liebler
100 × 91.6 mm129 parts2LApache-2.04ESP32
SensactHsNano3
klaus-liebler
90 × 56 mm122 parts2LApache-2.04ESP32
SensactHsLed2 - Kopie
klaus-liebler
90 × 47.5 mm117 parts2LApache-2.04ESP32
SensactHsLed2
klaus-liebler
90 × 74.7 mm116 parts2LApache-2.04ESP32
SensactHs modular esp32
klaus-liebler
100 × 86.5 mm25 parts2LApache-2.04
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k