SensactHsNano3
klaus-liebler·sensact·pcb/sensactHsNano3/sensactHsNano3.kicad_pcb
About the SensactHsNano3 PCB
SensactHsNano3 is an open source ESP32 PCB design by klaus-liebler, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 90 × 56 mm, with 122 components from 69 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TAS5805M, SRV05-4, DS2482, SN65HVD230 and MAX3485. By type, the board carries 52 capacitors, 34 resistors, 12 ICs, 9 connectors, 4 switches and 4 inductors.
It belongs with the iot & wireless designs in this gallery.
From the project
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier Namespaces haben ihren eigenen counter. Dieser beginnt bei 0x0 m
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier Namespaces haben ihren eigenen counter. Dieser beginnt bei 0x0 mit der ersten versendeten Nachricht und läuft nach 255 (0xFF) wieder auf 0. Die Ready-Nachricht wird immer mit counter=0x0 übertragen. Sie darf verwendet werden, um die Kommunikations-Session abzubrechen und die counter neu zu starten. Die counter representieren gemeinsames Wissen von Master und Slave REQEST (0b00)…
Main components on the SensactHsNano3
SensactHsNano3 bill of materials (BOM)
122 components, 69 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TAS5805M | HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x5.4mm_ThermalVias | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1U | U2 |
| 1 | SRV05-4 | SOT-23-6 | U3 |
| 1 | DS2482 | SOIC-8_3.9x4.9mm_Pitch1.27mm_handsolder | U4 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_Pitch1.27mm_handsolder | U5 |
| 1 | MAX3485 | SOIC-8_3.9x4.9mm_Pitch1.27mm_handsolder | U6 |
| 1 | RY8310 | SOT-23-6 | U7 |
| 1 | LM358 | SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | W5500 | LQFP-48_7x7mm_P0.5mm | U9 |
| 1 | INA219AXD INA219AxD | SOIC-8_3.9x4.9mm_Pitch1.27mm_handsolder | U10 |
| 1 | L78L15_SOT89 | SOT-89-3_Handsoldering | U11 |
| 1 | NRF24L01_BREAKOUT NRF24L01_Breakout | nRF24L01_Breakout | U12 |
| 1 | 25MHZ 25MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | C262659 HMI | Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J1 |
| 1 | SensactBusConnector | IDC-Header_2x05_P2.54mm_Horizontal_tightCrtYd | J2 |
| 1 | CAN+485 | PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal_smallerCourtyard | J3 |
| 1 | HR911105A | RJ45_HANRUN_HR911105A | J4 |
| 1 | Audio | PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal_smallerCourtyard | J5 |
| 1 | OneWire | PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal_smallerCourtyard | J6 |
| 1 | PROG | IDC_2x03_P1.27mm_Vertical | J7 |
Show 49 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 24V | PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal_smaller | J9 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12_smaller | J11 |
| 1 | 485CAN | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | CAN485 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP2 |
| 1 | SOLDERJUMPER_2_OPEN SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | TERM ON | SW_SPDT_PCM12_handsolder | SW1 |
| 1 | OFF TERM ON | SW_SPDT_PCM12_handsolder | SW2 |
| 1 | Reset | Button_2x4x3,5_handsolder | SW3 |
| 1 | Prog | Button_2x4x3,5_handsolder | SW5 |
| 1 | PSM712 | SOT-23_Handsoldering | D1 |
| 1 | 2A | D_SMB_Handsoldering | D2 |
| 1 | NUP2105 | SOT-23_Handsoldering | D3 |
| 1 | Bead | L_0805_2012Metric | FB1 |
| 2 | JA4575-BL | JA4575-BL | L1, L2 |
| 1 | 4U7 4u7 | L_Abracon_ASPI-0630LR | L5 |
| 2 | 470U 470u | CP_Radial_D10.0mm_P3.50mm | C1, C8 |
| 2 | 4U7 4u7 | C_0402_1005Metric | C2, C52 |
| 2 | 22U 22u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C3, C9 |
| 14 | C307331 u1 | C_0402_1005Metric | C4, C21, C22, C23, C24, C26, C27, C28 +6 |
| 4 | C14663 u1 | C_0603_1608Metric | C5, C10, C36, C37 |
| 2 | 1u | C_0402_1005Metric | C6, C7 |
| 4 | U22 u22 | C_0603_1608Metric | C11, C12, C13, C14 |
| 4 | U68 u68 | C_Rect_L7.0mm_W4.5mm_P5.00mm | C15, C16, C17, C18 |
| 1 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19 |
| 2 | u1 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20, C48 |
| 2 | 10U/16V 10u/16V | CP_EIA-3216-18_Kemet-A | C25, C49 |
| 1 | 22N 22n | C_0402_1005Metric | C30 |
| 3 | 22U 22u | C_0603_1608Metric | C33, C38, C39 |
| 2 | 10U 10u | C_1206_3216Metric | C34, C35 |
| 2 | 18P 18p | C_0402_1005Metric | C40, C45 |
| 1 | U47 u47 | C_0805_2012Metric | C43 |
| 2 | 10N 10n | C_0402_1005Metric | C50, C51 |
| 2 | 6N8 6n8 | C_0402_1005Metric | C53, C54 |
| 7 | 4K7 4k7 | R_0402_1005Metric | R1, R3, R4, R6, R25, R27, R33 |
| 1 | r1 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | C25076 k1 | R_0402_1005Metric | R5 |
| 2 | K12 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R23 |
| 5 | 10K 10k | R_0402_1005Metric | R8, R14, R29, R41, R48 |
| 2 | 5K1 5k1 | R_0402_1005Metric | R9, R10 |
| 1 | 1M | R_0402_1005Metric | R11 |
| 1 | 10R | R_0402_1005Metric | R12 |
| 2 | 1k | R_0603_1608Metric | R13, R22 |
| 4 | 49R9 | R_0603_1608Metric | R15, R17, R18, R19 |
| 1 | 12K4 | R_0402_1005Metric | R16 |
| 2 | K33 | R_0402_1005Metric | R20, R21 |
| 1 | 47K 47k | R_0402_1005Metric | R24 |
| 1 | 15K 15k | R_0402_1005Metric | R26 |
| 1 | 1k | R_0402_1005Metric | R34 |
| 2 | 22K 22k | R_0402_1005Metric | R51, R52 |
SensactHsNano3 design files
The KiCad project lives in the klaus-liebler/sensact repository on GitHub; these links point at the commit this page was built from.
SensactHsNano3: common questions
What microcontroller does the SensactHsNano3 use?
The SensactHsNano3 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the SensactHsNano3 PCB?
The SensactHsNano3 measures 90 × 56 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SensactHsNano3?
122 components, from 69 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SensactHsNano3 design files?
From the klaus-liebler/sensact repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SensactHsNano3 design in my own project?
Yes, under the terms of its Apache-2.0 license, which klaus-liebler chose for the repository.
Can I test firmware for the SensactHsNano3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in sensact
ESP32
SensactHs
klaus-liebler
100 × 86.5 mm317 parts2LApache-2.04ESP32
SensactHsIO5
klaus-liebler
90 × 67.5 mm213 parts2LApache-2.04ESP32
SensactHsIO4
klaus-liebler
90 × 74.6 mm196 parts2LApache-2.04ESP32
SensactHsIO3
klaus-liebler
90 × 53 mm187 parts2LApache-2.04ESP32
SensactUp4
klaus-liebler
70 × 70 mm145 parts2LApache-2.04SensactInpExt2
klaus-liebler
90 × 66 mm139 parts2LApache-2.04ESP32
SensactOutdoor
klaus-liebler
100 × 91.6 mm129 parts2LApache-2.04ESP32
SensactHsNano2
klaus-liebler
90 × 56.5 mm128 parts2LApache-2.04ESP32
SensactHsLed2 - Kopie
klaus-liebler
90 × 47.5 mm117 parts2LApache-2.04ESP32
SensactHsLed2
klaus-liebler
90 × 74.7 mm116 parts2LApache-2.04ESP32
SensactHs modular esp32
klaus-liebler
100 × 86.5 mm25 parts2LApache-2.04
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k