SensactHsIO4
klaus-liebler·sensact·pcb/sensactHsIO4/sensactHsIO4.kicad_pcb
About the SensactHsIO4 PCB
SensactHsIO4 is an open source ESP32 PCB design by klaus-liebler, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 90 × 74.6 mm, with 196 components from 111 distinct parts.
Its main chip is the MAX98357_MODULE, from the ESP32 family. Other key parts include the TPS92200D2DDCR, NRF24L01_BREAKOUT_SMD, AMS1117-3.3, SRV05-4 and SN65HVD230. By type, the board carries 83 resistors, 35 jumpers, 33 capacitors, 18 ICs, 9 connectors and 6 switches.
It belongs with the iot & wireless designs in this gallery.
From the project
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier Namespaces haben ihren eigenen counter. Dieser beginnt bei 0x0 m
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier Namespaces haben ihren eigenen counter. Dieser beginnt bei 0x0 mit der ersten versendeten Nachricht und läuft nach 255 (0xFF) wieder auf 0. Die Ready-Nachricht wird immer mit counter=0x0 übertragen. Sie darf verwendet werden, um die Kommunikations-Session abzubrechen und die counter neu zu starten. Die counter representieren gemeinsames Wissen von Master und Slave REQEST (0b00)…
Main components on the SensactHsIO4
SensactHsIO4 bill of materials (BOM)
196 components, 111 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX98357_MODULE ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 1 | TPS92200D2DDCR SN65HVD230 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TPS92200D2DDCR ULN2003 | SOP-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | NRF24L01_BREAKOUT_SMD ULN2003 | SOP-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | AMS1117-3.3 LM358 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 5 | SRV05-4 | SOT-23-6-spezial | U6, U13, U14, U15, U16 |
| 1 | SN65HVD230 SRV05-4 | SOT-23-6-spezial | U7 |
| 1 | EL817 SRV05-4 | SOT-23-6-spezial | U8 |
| 1 | TPS54202DDC SRV05-4 | SOT-23-6-spezial | U9 |
| 1 | DS18B20 EUP3458 | SOT-23-6 | U10 |
| 1 | ESP32-S3-WROOM-1 LM317_TO-252 | TO-252-2 | U11 |
| 1 | SP3485EN | SOIC-8_3.9x4.9mm_P1.27mm | U12 |
| 1 | AMS1117 | SOT-223-3_TabPin2_HANDSOLDER | U17 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U18 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 2 | BC817 | SOT-23 | Q3, Q4 |
| 1 | LH114 | FP-114 13pol | X1 |
| 1 | BUS | PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal | J1 |
| 1 | Bus | IDC-Header_2x05_P2.54mm_Horizontal_tightCrtYd | J2 |
| 1 | 24V | PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal | J3 |
Show 91 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IN0-3 IO4-7 | PhoenixContact_MC_0,5_8-G-2.5_1x08_P2.50mm_Horizontal | J5 |
| 1 | IO8-15 | PhoenixContact_MC_0,5_8-G-2.5_1x08_P2.50mm_Horizontal | J6 |
| 1 | EXT1 HMI | Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J7 |
| 1 | Conn_01x10 | Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J8 |
| 1 | AOUT | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9 |
| 1 | LED1 PROG | USB-C-HANBO-MC-307_C961709 | J10 |
| 1 | Buzzer | XDCR_CMT-7525-80-SMT-TR | BZ1 |
| 14 | OUT_IN0 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP9, JP10, JP11, JP12 +6 |
| 1 | IO00 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | IO02 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6 |
| 1 | IO04 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP7 |
| 1 | IO06 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP8 |
| 1 | IO01 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP13 |
| 1 | IO03 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP14 |
| 1 | IO05 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP15 |
| 1 | IO07 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP16 |
| 1 | IO08 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP20 |
| 1 | IO10 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP21 |
| 1 | IO12 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP22 |
| 1 | IO09 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP26 |
| 1 | IO11 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP27 |
| 1 | IO13 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP28 |
| 1 | SCL | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP29 |
| 1 | SDA | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP30 |
| 1 | 485 IO12 BUZZER | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP31 |
| 1 | BUSTX | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP32 |
| 1 | BUSRX | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP33 |
| 1 | BUS1 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP34 |
| 1 | BUS2 | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP35 |
| 1 | USB 3V INT | SW_SPDT_PCM12_handsolder | SW1 |
| 1 | OFF TERM ON | SW_SPDT_PCM12_handsolder | SW2 |
| 1 | Reset | Button_2x4x3,5_handsolder | SW3 |
| 1 | R | Button_SMD_4,5x4,5 | SW4 |
| 1 | L | Button_SMD_4,5x4,5 | SW5 |
| 1 | OK | Button_SMD_4,5x4,5 | SW6 |
| 1 | SM712 | SOT-23_Handsoldering | D1 |
| 1 | SM4007PL D | D_SOD-123 | D2 |
| 1 | SM4007PL 3V | D_SOD-123 | D3 |
| 1 | SM4007PL SS34 | D_SMA | D4 |
| 1 | NUP2105L | SOT-23_Handsoldering | D5 |
| 1 | 22UH 6u8 | L_Abracon_ASPI-0630LR | L1 |
| 1 | C15008 u1 | C_0402_1005Metric | C1 |
| 2 | C15008 u1 | C_0603_1608Metric | C2, C20 |
| 4 | u1 | C_0603_1608Metric | C3, C7, C8, C11 |
| 2 | u1 | C_0402_1005Metric | C4, C5 |
| 1 | 22u | C_0603_1608Metric | C6 |
| 5 | C49678 u1 | C_0603_1608Metric | C9, C13, C17, C18, C19 |
| 4 | 10U u1 | C_0603_1608Metric | C10, C12, C14, C22 |
| 1 | C1525 u1 | C_0603_1608Metric | C15 |
| 1 | 22U u1 | C_0603_1608Metric | C16 |
| 1 | 10U 10u | C_1206_3216Metric | C21 |
| 1 | 22N/250V 10n | C_0603_1608Metric | C23 |
| 1 | 10U 22u | C_0603_1608Metric | C24 |
| 3 | C49678 u1 | C_0402_1005Metric | C25, C27, C32 |
| 1 | 10U 1u | C_0402_1005Metric | C26 |
| 1 | C49678 4u7 | C_0603_1608Metric | C28 |
| 1 | 1u | C_0603_1608Metric | C29 |
| 1 | C49678 4u7 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C30 |
| 1 | 10U 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31 |
| 1 | 56P u1 | C_0402_1005Metric | C33 |
| 9 | k1 | R_0603_1608Metric | R1, R8, R19, R39, R40, R41, R48, R49 +1 |
| 1 | 0R15 10k | R_0603_1608Metric | R2 |
| 1 | 10K 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 22K 1k | R_0402_1005Metric | R4 |
| 3 | 1k | R_0603_1608Metric | R5, R6, R57 |
| 15 | 10k | R_0603_1608Metric | R7, R20, R21, R22, R23, R32, R35, R42 +7 |
| 1 | K12 | R_0603_1608Metric | R9 |
| 1 | 15K 10k | R_0402_1005Metric | R10 |
| 1 | 10K 4k7 | R_0603_1608Metric | R11 |
| 1 | K12 10R | R_0603_1608Metric | R12 |
| 1 | 0R15 10R | R_0603_1608Metric | R13 |
| 3 | K47 10R | R_0603_1608Metric | R14, R37, R38 |
| 20 | 10R | R_0603_1608Metric | R15, R24, R27, R36, R45, R46, R66, R67 +12 |
| 2 | 3K3 k1 | R_0603_1608Metric | R16, R28 |
| 2 | 6K8 k1 | R_0603_1608Metric | R17, R18 |
| 2 | 4K7 10R | R_0603_1608Metric | R25, R26 |
| 1 | 10K k1 | R_0603_1608Metric | R29 |
| 2 | 470K k1 | R_0603_1608Metric | R30, R31 |
| 2 | K47 10k | R_0603_1608Metric | R33, R34 |
| 1 | 10K 10R | R_0603_1608Metric | R47 |
| 1 | 75k | R_0603_1608Metric | R54 |
| 1 | 24K | R_0603_1608Metric | R55 |
| 2 | 1k | R_0402_1005Metric | R56, R58 |
| 1 | 4k7 | R_0402_1005Metric | R59 |
| 1 | 3k3 | R_0402_1005Metric | R60 |
| 1 | 2k2 | R_0402_1005Metric | R61 |
| 1 | 10k | R_0402_1005Metric | R62 |
| 1 | 22k | R_0402_1005Metric | R63 |
| 1 | K24 | R_0603_1608Metric | R64 |
| 1 | 2K7 | R_0603_1608Metric | R65 |
| 2 | 5k1 | R_0603_1608Metric | R80, R81 |
SensactHsIO4 design files
The KiCad project lives in the klaus-liebler/sensact repository on GitHub; these links point at the commit this page was built from.
SensactHsIO4: common questions
What microcontroller does the SensactHsIO4 use?
The SensactHsIO4 is built around the MAX98357_MODULE, from the ESP32 family.
How big is the SensactHsIO4 PCB?
The SensactHsIO4 measures 90 × 74.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SensactHsIO4?
196 components, from 111 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SensactHsIO4 design files?
From the klaus-liebler/sensact repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SensactHsIO4 design in my own project?
Yes, under the terms of its Apache-2.0 license, which klaus-liebler chose for the repository.
Can I test firmware for the SensactHsIO4 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in sensact
ESP32
SensactHs
klaus-liebler
100 × 86.5 mm317 parts2LApache-2.04ESP32
SensactHsIO5
klaus-liebler
90 × 67.5 mm213 parts2LApache-2.04ESP32
SensactHsIO3
klaus-liebler
90 × 53 mm187 parts2LApache-2.04ESP32
SensactUp4
klaus-liebler
70 × 70 mm145 parts2LApache-2.04SensactInpExt2
klaus-liebler
90 × 66 mm139 parts2LApache-2.04ESP32
SensactOutdoor
klaus-liebler
100 × 91.6 mm129 parts2LApache-2.04ESP32
SensactHsNano2
klaus-liebler
90 × 56.5 mm128 parts2LApache-2.04ESP32
SensactHsNano3
klaus-liebler
90 × 56 mm122 parts2LApache-2.04ESP32
SensactHsLed2 - Kopie
klaus-liebler
90 × 47.5 mm117 parts2LApache-2.04ESP32
SensactHsLed2
klaus-liebler
90 × 74.7 mm116 parts2LApache-2.04ESP32
SensactHs modular esp32
klaus-liebler
100 × 86.5 mm25 parts2LApache-2.04
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k