SensactHs
klaus-liebler·sensact·pcb/sensactHs/sensactHs.kicad_pcb
About the SensactHs PCB
SensactHs is an open source ESP32 PCB design by klaus-liebler, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 100 × 86.5 mm, with 317 components from 81 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the MAX98357_MODULE, TPS92200D2DDCR, NRF24L01_BREAKOUT_SMD, AMS1117-3.3 and SRV05. By type, the board carries 148 resistors, 104 capacitors, 33 ICs, 7 connectors, 7 jumpers and 3 diodes.
It belongs with the iot & wireless designs in this gallery.
From the project
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier Namespaces haben ihren eigenen counter. Dieser beginnt bei 0x0 m
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier Namespaces haben ihren eigenen counter. Dieser beginnt bei 0x0 mit der ersten versendeten Nachricht und läuft nach 255 (0xFF) wieder auf 0. Die Ready-Nachricht wird immer mit counter=0x0 übertragen. Sie darf verwendet werden, um die Kommunikations-Session abzubrechen und die counter neu zu starten. Die counter representieren gemeinsames Wissen von Master und Slave REQEST (0b00)…
Main components on the SensactHs
SensactHs bill of materials (BOM)
317 components, 81 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX98357_MODULE PCA9555 | TSSOP-24_4.4x7.8mm_Pitch0.65mm_handsolder | U1 |
| 2 | TPS92200D2DDCR PCA9555 | TSSOP-24_4.4x7.8mm_Pitch0.65mm_handsolder | U2, U3 |
| 1 | NRF24L01_BREAKOUT_SMD PCA9555 | TSSOP-24_4.4x7.8mm_Pitch0.65mm_handsolder | U4 |
| 1 | AMS1117-3.3 SRV05 | SOT-23-6_handsolder | U5 |
| 10 | SRV05 | SOT-23-6_handsolder | U6, U12, U13, U14, U15, U16, U17, U18 +2 |
| 1 | SN65HVD230 SRV05 | SOT-23-6_handsolder | U7 |
| 1 | EL817 SRV05 | SOT-23-6_handsolder | U8 |
| 1 | TPS54202DDC SRV05 | SOT-23-6_handsolder | U9 |
| 1 | DS18B20 SRV05 | SOT-23-6_handsolder | U10 |
| 1 | ESP32-S3-WROOM-1 SRV05 | SOT-23-6_handsolder | U11 |
| 6 | DRV8860woPad | TSSOP-16_4.4x5mm_Pitch0.65mm_handsolder | U21, U22, U23, U31, U32, U33 |
| 1 | ULN2803 | SOIC-18_7.5x11.6mm_Pitch1.27mm_handsolder | U24 |
| 1 | PCA9685 | TSSOP-28_4.4x9.7mm_Pitch0.65mm_handsolder | U25 |
| 1 | STM32F103RG | LQFP-64_10x10mm_Pitch0.5mm_handsolder | U26 |
| 1 | LMR14006 | SOT-23-6_handsolder | U27 |
| 1 | SN65HVD230 | SOIC-8_3.9x4.9mm_Pitch1.27mm_handsolder | U28 |
| 2 | DS2482 | SOIC-8_3.9x4.9mm_Pitch1.27mm_handsolder | U29, U30 |
| 1 | Q_NPN_BEC | SOT-23_Handsoldering | Q1 |
| 1 | CRYSTAL_SMD_4pol | quartz3225 | X1 |
| 1 | Crystal_Small | Crystal_Watch | Y1 |
Show 61 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB | Pin_Header_Straight_1x04 | P1 |
| 1 | SWD | vasch_strip_5x2 | P2 |
| 1 | 2 | KF141R-3p | P3 |
| 1 | 1 | KF141R-3p | P4 |
| 1 | 3 | KF141R-8p | P5 |
| 1 | CONN_01X04 | Pin_Header_Straight_2x02 | P6 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02 | P7 |
| 2 | PUSH_BUTTON_INPUT | vasch_strip_17x2 | INP1, INP3 |
| 1 | CONN_01X14 | vasch_strip_7x2 | INP2 |
| 1 | JUMPER | Pin_Header_Straight_1x02 | JP1 |
| 1 | CAN_TERM | Pin_Header_Straight_1x02 | JP2 |
| 5 | JUMPER3 | SMD-solder-bridge-3pin | JP3, JP4, JP5, JP6, JP7 |
| 2 | POWERED OUTPUTS | vasch_strip_17x2 | O1, O3 |
| 1 | PWM_OUTPUTS | vasch_strip_10x2 | O2 |
| 1 | CONN_02X07 | vasch_strip_7x2 | PWR1 |
| 1 | CONN_02X05 | vasch_strip_5x2 | PWR2 |
| 1 | BOOT0 | SW_PUSH_SMALL | SW2 |
| 1 | RESET | SW_PUSH_SMALL | SW3 |
| 1 | RED | LED_5730 | D1 |
| 1 | SM4007PL D | do214ac_handsolder | D2 |
| 1 | SM4007PL MBR0540 | do214ac_handsolder | D3 |
| 1 | 22UH INDUCTOR | R_1206_HandSoldering | L1 |
| 1 | 22UH 15u | CD54 | L2 |
| 3 | C15008 u1 | C_0805_HandSoldering | C1, C2, C20 |
| 58 | u1 | C_0805_HandSoldering | C3, C4, C5, C6, C7, C8, C11, C29 +50 |
| 10 | C49678 u1 | C_0805_HandSoldering | C9, C13, C17, C18, C19, C25, C27, C28 +2 |
| 8 | 10U u1 | C_0805_HandSoldering | C10, C12, C14, C21, C22, C24, C26, C31 |
| 1 | C1525 u1 | C_0805_HandSoldering | C15 |
| 3 | 22U u1 | C_0805_HandSoldering | C16, C34, C35 |
| 1 | 22N/250V u1 | C_0805_HandSoldering | C23 |
| 1 | 56P u1 | C_0805_HandSoldering | C33 |
| 2 | 10p | C_0805_HandSoldering | C70, C71 |
| 8 | 10u | C_1206_HandSoldering | C75, C76, C77, C89, C93, C98, C99, C100 |
| 2 | 22p | C_0805_HandSoldering | C78, C79 |
| 2 | 2u2 | C_0805_HandSoldering | C81, C82 |
| 1 | 1u | C_0805_HandSoldering | C83 |
| 1 | u15 | C_0805_HandSoldering | C90 |
| 2 | 4u7 | C_1206_HandSoldering | C91, C92 |
| 1 | m1 | C_1206_HandSoldering | C94 |
| 57 | 4k7 | R_0805_HandSoldering | R1, R9, R19, R20, R27, R35, R36, R41 +49 |
| 1 | 0R15 4k7 | R_0805_HandSoldering | R2 |
| 2 | 10K 4k7 | R_0805_HandSoldering | R3, R11 |
| 1 | 22K 4k7 | R_0805_HandSoldering | R4 |
| 59 | 1k | R_0805_HandSoldering | R5, R6, R7, R8, R15, R21, R22, R23 +51 |
| 1 | 15K 4k7 | R_0805_HandSoldering | R10 |
| 1 | K12 4k7 | R_0805_HandSoldering | R12 |
| 1 | 0R15 1k | R_0805_HandSoldering | R13 |
| 3 | K47 1k | R_0805_HandSoldering | R14, R37, R38 |
| 1 | 3K3 1k | R_0805_HandSoldering | R16 |
| 2 | 6K8 4k7 | R_0805_HandSoldering | R17, R18 |
| 2 | 4K7 4k7 | R_0805_HandSoldering | R25, R26 |
| 1 | 3K3 4k7 | R_0805_HandSoldering | R28 |
| 2 | 10K 1k | R_0805_HandSoldering | R29, R47 |
| 2 | 470K 1k | R_0805_HandSoldering | R30, R31 |
| 2 | K47 4k7 | R_0805_HandSoldering | R33, R34 |
| 1 | 330R | R_1206_HandSoldering | R129 |
| 2 | 22R | R_0805_HandSoldering | R131, R132 |
| 4 | 10k | R_0805_HandSoldering | R133, R134, R136, R142 |
| 1 | 220R | R_0805_HandSoldering | R135 |
| 1 | 120R | R_1206_HandSoldering | R143 |
| 1 | 3k3 | R_0805_HandSoldering | R148 |
SensactHs design files
The KiCad project lives in the klaus-liebler/sensact repository on GitHub; these links point at the commit this page was built from.
SensactHs: common questions
What microcontroller does the SensactHs use?
The SensactHs is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the SensactHs PCB?
The SensactHs measures 100 × 86.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SensactHs?
317 components, from 81 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SensactHs design files?
From the klaus-liebler/sensact repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the SensactHs design in my own project?
Yes, under the terms of its Apache-2.0 license, which klaus-liebler chose for the repository.
Can I test firmware for the SensactHs without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in sensact
ESP32
SensactHsIO5
klaus-liebler
90 × 67.5 mm213 parts2LApache-2.04ESP32
SensactHsIO4
klaus-liebler
90 × 74.6 mm196 parts2LApache-2.04ESP32
SensactHsIO3
klaus-liebler
90 × 53 mm187 parts2LApache-2.04ESP32
SensactUp4
klaus-liebler
70 × 70 mm145 parts2LApache-2.04SensactInpExt2
klaus-liebler
90 × 66 mm139 parts2LApache-2.04ESP32
SensactOutdoor
klaus-liebler
100 × 91.6 mm129 parts2LApache-2.04ESP32
SensactHsNano2
klaus-liebler
90 × 56.5 mm128 parts2LApache-2.04ESP32
SensactHsNano3
klaus-liebler
90 × 56 mm122 parts2LApache-2.04ESP32
SensactHsLed2 - Kopie
klaus-liebler
90 × 47.5 mm117 parts2LApache-2.04ESP32
SensactHsLed2
klaus-liebler
90 × 74.7 mm116 parts2LApache-2.04ESP32
SensactHs modular esp32
klaus-liebler
100 × 86.5 mm25 parts2LApache-2.04
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k