9 open source boards using the 74HC4067
Real designs built with the 74HC4067, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
OpenDeck r3.1.2
shanteacontrols
181 × 97 mm258 parts2LApache-2.0956STM32
Dboard
nnalyd
284.7 × 94.2 mm282 parts4LGPL-3.01STM32
Line follower
alientanya
214 × 187.9 mm218 parts2LMIT1STM32
KHEops70
mgsg
285 × 94.6 mm477 parts4LGPL-3.00STM32
RM Electronics Central Library
CptEdward-MP
124.5 × 78.3 mm211 parts2LNo license0AVR/Arduino
MusselGapeTracker RevH
millerlp
72.5 × 57.8 mm82 parts2LGPL-3.00ADC
FYNCH-BIO
33 × 66 mm98 parts4LNo license12AVR/Arduino
Digital board
minisystem
200 × 150 mm237 parts2LNo license3NXP
Drum Master
thebiguno
99.7 × 99.7 mm180 parts2LNo license75
How designs wire the 74HC4067
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 74HC4067 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF.
- The I7 pin has a capacitor to GND on 4 of 7 designs, most often 100 nF (then 10 nF).
- The I6 pin has a capacitor to GND on 4 of 7 designs, most often 100 nF (then 10 nF).
- The I5 pin has a capacitor to GND on 4 of 7 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| I7pin 2 | Connected to: Signal 100% |
|
| I6pin 3 | Connected to: Signal 100% |
|
| I5pin 4 | Connected to: Signal 100% |
|
| I4pin 5 | Connected to: Signal 100% |
|
| I2pin 7 | Connected to: Signal 100% |
|
| I1pin 8 | Connected to: Signal 86% |
|
| I0pin 9 | Connected to: Signal 100% |
|
| GNDpin 12 | Connected to: GND 100% | — |
| I14pin 17 | Connected to: Signal 86% |
|
| I13pin 18 | Connected to: Signal 86% |
|
| I11pin 20 | Connected to: Signal 86% |
|
| I10pin 21 | Connected to: Signal 86% |
|
| I9pin 22 | Connected to: Signal 100% |
|
| I8pin 23 | Connected to: Signal 100% |
|
| VCCpin 24 | Connected to: 5V 86% |
|
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenDeck r3.1.2 by shanteacontrols, Drum Master by thebiguno, ADC by FYNCH-BIO and Digital board by minisystem.
The 74HC4067 in open source designs
The gallery holds 9 open source boards using the 74HC4067 from 9 GitHub repositories; a typical one measures about 181 × 94.6 mm and carries around 218 components.
67% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is OpenDeck r3.1.2 by shanteacontrols.
Parts used alongside the 74HC4067
Microcontrollers on boards using the 74HC4067
What boards using the 74HC4067 are built for
74HC4067: common questions
Where can I find a 74HC4067 reference design?
Each of the 9 boards on this page is a real design using the 74HC4067. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC4067 VCC pin?
The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the 74HC4067.
How is the 74HC4067 I7 pin connected?
The I7 pin has a capacitor to GND on 4 of 7 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 9 open source designs using the 74HC4067.
How is the 74HC4067 I6 pin connected?
The I6 pin has a capacitor to GND on 4 of 7 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 9 open source designs using the 74HC4067.
What parts are used alongside the 74HC4067?
The 74HC165, AMS1117-3.3, QRE1113GR and TCRT5000L appear in the most repositories here.
Which microcontrollers do boards using the 74HC4067 use?
Most are built on STM32 (4), AVR/Arduino (2), NXP (1) and RP2040/RP2350 (1).
How big is a typical board using the 74HC4067?
The median is 181 × 94.6 mm, and 67% are two-layer designs.
What is the most popular open source board using the 74HC4067?
By GitHub stars, OpenDeck r3.1.2 by shanteacontrols, with 956 stars.
Can I simulate one of these boards using the 74HC4067 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.