10 open source boards using the SPX3819M5
Real designs built with the SPX3819M5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
OpenDeck r3.1.2
shanteacontrols
181 × 97 mm258 parts2LApache-2.0956STM32
SimpleFC G
wangyeee
42 × 50 mm130 parts4LBSD-3-Clause9SDWire
3mdeb
21.6 × 48.4 mm65 parts4LApache-2.08SDWire
emaste
21.6 × 48.4 mm65 parts4LApache-2.02SDWire
3mdeb
21.6 × 50.4 mm65 parts4LApache-2.01SDWire
moto-timo
21.6 × 48.4 mm65 parts4LApache-2.00SDWire
agners
21.6 × 48.4 mm65 parts4LApache-2.00SDWire
capotosto
21.6 × 48.4 mm65 parts4LApache-2.00STM32
SimpleFCv2
wangyeee
42 × 50 mm119 parts4LBSD-3-Clause9STM32
AirSeneor
wangyeee
45 × 30 mm39 parts2LBSD-3-Clause9
How designs wire the SPX3819M5
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the SPX3819M5 connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 10 µF).
- The EN pin has a capacitor to GND on 7 of 8 designs, most often 10 µF (then 100 nF).
- The OUT pin is tied to 3.3V on 8 of 8 designs.
- The ADJ pin is left unconnected on 7 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: Signal 75% · 5V 25% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: Signal 75% · 5V 25% |
|
| ADJpin 4 | Connected to: Not connected 88% | — |
| OUTpin 5 | Connected to: 3.3V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenDeck r3.1.2 by shanteacontrols, AirSeneor by wangyeee, SDWire by 3mdeb and SDWire by emaste.
The SPX3819M5 in open source designs
The gallery holds 10 open source boards using the SPX3819M5 from 8 GitHub repositories; a typical one measures about 21.6 × 48.4 mm and carries around 65 components.
80% use four copper layers or more, and 100% carry an open source license.
The most starred is OpenDeck r3.1.2 by shanteacontrols.
Parts used alongside the SPX3819M5
Microcontrollers on boards using the SPX3819M5
What boards using the SPX3819M5 are built for
SPX3819M5: common questions
Where can I find a SPX3819M5 reference design?
Each of the 10 boards on this page is a real design using the SPX3819M5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SPX3819M5 IN pin connected?
The IN pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the SPX3819M5.
How is the SPX3819M5 EN pin connected?
The EN pin has a capacitor to GND on 7 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the SPX3819M5.
How is the SPX3819M5 OUT pin connected?
The OUT pin is tied to 3.3V on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the SPX3819M5.
What parts are used alongside the SPX3819M5?
The AT24CS02-SSHM, FT200XD, MC74HC1G04DTT1G, TS3A27518EPWR and USB2640-HZH-02 appear in the most repositories here.
Which microcontrollers do boards using the SPX3819M5 use?
Most are built on STM32 (3) and RP2040/RP2350 (1).
How big is a typical board using the SPX3819M5?
The median is 21.6 × 48.4 mm, and 20% are two-layer designs.
What is the most popular open source board using the SPX3819M5?
By GitHub stars, OpenDeck r3.1.2 by shanteacontrols, with 956 stars.
Can I simulate one of these boards using the SPX3819M5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.