Soldered Inkplate 5 Gen2 panel
SolderedElectronics·Soldered-Inkplate-5-Gen2-hardware-design·CAD/V1.1.0/PANEL/Soldered Inkplate 5 Gen2_panel.kicad_pcb
About the Soldered Inkplate 5 Gen2 panel PCB
Soldered Inkplate 5 Gen2 panel is an open source ESP32 PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 8.2 × 17.5 mm, with 258 components from 71 distinct parts.
Its main chip is the ESP32-WROVER, from the ESP32 family. Other key parts include the TPS65186RGZ, TPS3840PL27DBVR, CH340C, MCP73831T and MC14093BDTR2G. By type, the board carries 57 capacitors, 54 test points, 48 resistors, 41 relays, 12 diodes and 11 ICs.
From the project
Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-5-Gen2 designed by Soldered Electronics.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered Inkplate 5 Gen2 panel
Soldered Inkplate 5 Gen2 panel bill of materials (BOM)
258 components, 71 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS65186RGZ | VQFN-49 | U1 |
| 1 | TPS3840PL27DBVR | SOT-23-5 | U2 |
| 1 | CH340C | SOP-16 | U3 |
| 1 | MCP73831T | SOT-23-5 | U4 |
| 1 | MC14093BDTR2G | TSSOP-14 | U5 |
| 1 | TPS7A2633DRVR | TPS7A2633DRVR | U6 |
| 1 | PCF85063A | PCF85063A | U7 |
| 1 | SN74LVC1G34DBV | SN74LVC1G34DBV | U8 |
| 1 | ED052TC4 | ED052TC4 | U9 |
| 1 | PCAL6416AHF,128 | PCAL6416AHF,128 | U10 |
| 1 | ESP32-WROVER | ESP32-WROVER | U11 |
| 1 | DNP | SOT-23-3 | Q1 |
| 3 | NPN | SOT-23-3 | Q2, Q3, Q8 |
| 1 | NMOS | SOT-23-3 | Q4 |
| 3 | PMOS | SOT-23-3 | Q5, Q6, Q10 |
| 2 | SSM3J358R,LF | SOT-23-3 | Q7, Q9 |
| 1 | 7LC32768F12UC | ABS07AIG-32.768KHZ-7-D-T | X1 |
| 1 | 1206FUSE-500MA 1206FUSE-500mA | 1206FUSE | F1 |
| 4 | STANDOFF_M3 Standoff_M3 | Standoff_M3 | H1, H2, H3, H4 |
| 2 | SMD_JUMPER | SMD_JUMPER | JP1, JP4 |
Show 51 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | SMD_JUMPER_3_PAD_CONNECTED_LEFT_TRACE | SMD_JUMPER_3_PAD_CONNECTED_LEFT_TRACE | JP2, JP3, JP6, JP7, JP8 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK | SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK | JP5 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K2 |
| 1 | easyC-SMD | easyC-connector | K3 |
| 1 | JST-2PIN-SMD JST-2pin-SMD | JST-2pin-SMD | K4 |
| 35 | HEADER_MALE_1X1_INKPLATE HEADER_MALE_1X1_Inkplate | HEADER_MALE_1X1_Inkplate | K5, K6, K7, K8, K9, K12, K13, K14 +27 |
| 1 | HYC77-TF09-200 | HYC77-TF09-200 | K10 |
| 1 | CR2032_BS-6-1 | CR2032-BS-6-1 | K11 |
| 1 | WP27D-S050VA3-R15000 | WP27D-S050VA3-R15000 | K21 |
| 5 | PAD_4X4 PAD_4x4 | PAD_4x4 | PAD1, PAD2, PAD3, PAD4, PAD5 |
| 1 | SK-3296S-01-L1 | SK-3296S-01-L1 | S1 |
| 1 | YTSA007A0151803B | YTSA007A0151803B | SW1 |
| 2 | K2-1114SA-A4SW-06 | K2-1114SA-A4SW-06 | SW2, SW3 |
| 54 | TEST_POINT_SMD_0.8MM Test_Point_SMD_0.8mm | Test_Point_SMD_0.8mm | TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14 +46 |
| 2 | CUS10F30,H3F | SOD-323-2 | D1, D3 |
| 4 | BAT20J | SOD-323 | D2, D4, D5, D10 |
| 2 | BAT54S | SOT-23-3 | D6, D7 |
| 1 | RED | 0402LED | D8 |
| 1 | PURPLE_SIDE | LTST-S270GKT | D9 |
| 2 | M4_DIODA | M4_DIODA | D11, D12 |
| 1 | LQH44PN4R7MP0L | 1515L | L1 |
| 1 | NR4012T2R2M | NR4012 | L2 |
| 15 | 4U7-TMK212AB7475KG-T 4u7-TMK212AB7475KG-T | 0805C | C1, C2, C3, C4, C6, C7, C9, C11 +7 |
| 3 | 10U-GRM188R61E106KA73J 10u-GRM188R61E106KA73J | 0603C | C5, C8, C10 |
| 2 | 2U2-GRM188R61E225MA12D 2u2-GRM188R61E225MA12D | 0603C | C14, C15 |
| 2 | 10N-AC0603KRX7R8BB103 10n-AC0603KRX7R8BB103 | 0603C | C16, C17 |
| 2 | 100N-AC0603KRX7R8BB104 100n-AC0603KRX7R8BB104 | 0603C | C18, C19 |
| 16 | 100N 100n | 0603C | C20, C22, C23, C29, C30, C32, C33, C36 +8 |
| 3 | 10U 10u | 1206C | C21, C27, C51 |
| 2 | DNP | 2917C | C24, C55 |
| 6 | 2U2 2u2 | 0603C | C25, C26, C28, C31, C37, C52 |
| 2 | 12P 12p | 0603C | C34, C35 |
| 3 | 100P 100p | 0603C | C40, C56, C57 |
| 1 | 4U7 4u7 | 0603C | C47 |
| 7 | 10K 10k | 0603R | R1, R4, R26, R27, R42, R47, R48 |
| 1 | NTC-NCP18XH103F03RB | 0603R | R2 |
| 1 | 43K-RC0603FR-0743KL 43k-RC0603FR-0743KL | 0603R | R3 |
| 14 | 100K 100k | 0603R | R5, R6, R7, R25, R30, R31, R36, R38 +6 |
| 5 | 4K7 4k7 | 0603R | R8, R9, R10, R11, R12 |
| 2 | 1M | 0603R | R13, R15 |
| 1 | 47K5-RC0603FR-0747K5L 47k5-RC0603FR-0747K5L | 0603R | R14 |
| 1 | 52K3-RC0603FR-0752K3L 52k3-RC0603FR-0752K3L | 0603R | R16 |
| 2 | 5K1 5k1 | 0603R | R17, R18 |
| 2 | DNP | 0603R | R19, R34 |
| 6 | 1k | 0603R | R20, R23, R24, R28, R35, R37 |
| 1 | 0R | 0603R | R21 |
| 1 | 47K 47k | 0603R | R22 |
| 1 | 510K 510k | 0603R | R29 |
| 1 | 2K49 2k49 | 0603R | R32 |
| 1 | 47R | 0603R | R33 |
| 1 | 330R | 0603R | R46 |
Soldered Inkplate 5 Gen2 panel design files
The KiCad project lives in the SolderedElectronics/Soldered-Inkplate-5-Gen2-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered Inkplate 5 Gen2 panel: common questions
What microcontroller does the Soldered Inkplate 5 Gen2 panel use?
The Soldered Inkplate 5 Gen2 panel is built around the ESP32-WROVER, from the ESP32 family.
How big is the Soldered Inkplate 5 Gen2 panel PCB?
The Soldered Inkplate 5 Gen2 panel measures 8.2 × 17.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered Inkplate 5 Gen2 panel?
258 components, from 71 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered Inkplate 5 Gen2 panel design files?
From the SolderedElectronics/Soldered-Inkplate-5-Gen2-hardware-design repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Soldered Inkplate 5 Gen2 panel design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the Soldered Inkplate 5 Gen2 panel without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Soldered-Inkplate-5-Gen2-hardware-design
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k