12 open source boards using the TPS65186RGZ
Real designs built with the TPS65186RGZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Zerowriter Inkplate 5 Gen2
zerowriter
130.6 × 75.2 mm252 parts2LGPL-3.046
ESP32Soldered Inkplate 6
SolderedElectronics
144.4 × 107.8 mm224 parts2LTAPR-OHL-1.05
ESP32Soldered Inkplate 5 Gen2
130.6 × 75.2 mm258 parts2LTAPR-OHL-1.04
ESP32Soldered Inkplate 6PLUS
144.4 × 107.8 mm242 parts2LTAPR-OHL-1.02
ESP32Soldered Inkplate 6 FLICK
150.4 × 107.8 mm329 parts2LTAPR-OHL-1.01
ESP32Soldered Inkplate 6PLUS
144.4 × 107.8 mm242 parts2LTAPR-OHL-1.01
ESP32Inkplate 6 SS panel
294.8 × 119.8 mm223 parts2LTAPR-OHL-1.05
ESP32Soldered Inkplate 5 Gen2 panel
8.2 × 17.5 mm258 parts2LTAPR-OHL-1.04
ESP32Inkplate 6PLUS panel
294.8 × 119.8 mm241 parts2LTAPR-OHL-1.02
ESP32Soldered Inkplate 6 FLICK panel
33.7 × 6.2 mm329 parts2LTAPR-OHL-1.01
ESP32Inkplate 6PLUS panel
294.8 × 119.8 mm241 parts2LTAPR-OHL-1.01
ESP32Soldered Inkplate 6FLICK Gen2
144.4 × 107.8 mm247 parts2LTAPR-OHL-1.01
The TPS65186RGZ in open source designs
The gallery holds 12 open source boards using the TPS65186RGZ from 6 GitHub repositories; a typical one measures about 144.4 × 107.8 mm and carries around 245 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Zerowriter Inkplate 5 Gen2 by zerowriter.
Parts used alongside the TPS65186RGZ
Microcontrollers on boards using the TPS65186RGZ
What boards using the TPS65186RGZ are built for
TPS65186RGZ: common questions
Where can I find a TPS65186RGZ reference design?
Each of the 12 boards on this page is a real design using the TPS65186RGZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPS65186RGZ?
The CH340C, ESP32-WROVER, PCAL6416AHF,128, PCF85063A and SN74LVC1G34DBV appear in the most repositories here.
Which microcontrollers do boards using the TPS65186RGZ use?
Most are built on ESP32 (12).
How big is a typical board using the TPS65186RGZ?
The median is 144.4 × 107.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the TPS65186RGZ?
By GitHub stars, Zerowriter Inkplate 5 Gen2 by zerowriter, with 46 stars.
Can I simulate one of these boards using the TPS65186RGZ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.