3 open source boards using the ED052TC4
Real designs built with the ED052TC4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Zerowriter Inkplate 5 Gen2
zerowriter
130.6 × 75.2 mm252 parts2LGPL-3.046
ESP32Soldered Inkplate 5 Gen2
SolderedElectronics
130.6 × 75.2 mm258 parts2LTAPR-OHL-1.04
ESP32Soldered Inkplate 5 Gen2 panel
8.2 × 17.5 mm258 parts2LTAPR-OHL-1.04
The ED052TC4 in open source designs
The gallery holds 3 open source boards using the ED052TC4 from 2 GitHub repositories; a typical one measures about 130.6 × 75.2 mm and carries around 258 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Zerowriter Inkplate 5 Gen2 by zerowriter.
Parts used alongside the ED052TC4
Microcontrollers on boards using the ED052TC4
ED052TC4: common questions
Where can I find a ED052TC4 reference design?
Each of the 3 boards on this page is a real design using the ED052TC4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ED052TC4?
The CH340C, ESP32-WROVER, PCAL6416AHF,128, PCF85063A and SN74LVC1G34DBV appear in the most repositories here.
Which microcontrollers do boards using the ED052TC4 use?
Most are built on ESP32 (3).
How big is a typical board using the ED052TC4?
The median is 130.6 × 75.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the ED052TC4?
By GitHub stars, Zerowriter Inkplate 5 Gen2 by zerowriter, with 46 stars.
Can I simulate one of these boards using the ED052TC4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.