19 open source boards using the SN74LVC1G34DBV

Real designs built with the SN74LVC1G34DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the SN74LVC1G34DBV

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the SN74LVC1G34DBV connects to, and the resistors, capacitors and other passives placed on it.

  • The A pin has a series resistor on 6 of 9 designs, most often 330 Ω (then 47 Ω).
  • The VCC pin has a capacitor to GND on 6 of 9 designs, most often 100 nF (then 4.7 µF).
NCpin 1Connected to: Not connected 100%
Apin 2Connected to: Signal 78% · not connected 22%
  • Series resistor on 67% · 330 Ω (5), 47 Ω (1)
GNDpin 3Connected to: GND 67% · a signal 33%
  • Series capacitor on 33% · 4.7 µF (5), 100 nF (2), 2.2 µF (2)
  • Series resistor on 33% · 15 Ω (2), 43 kΩ (1)
VCCpin 5Connected to: TPS65186RGZ 44%, TPS65186RGZR 22%
  • Capacitor to GND on 67% · 100 nF (16), 4.7 µF (5)
  • Series resistor on 33% · 10 kΩ (3)
  • Series capacitor on 33% · 100 nF (3), 4.7 µF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zerowriter Inkplate 5 Gen2 by zerowriter, Inkplate10 Soldered by SolderedElectronics, Soldered Inkplate 4 TEMPERA with glass panel by SolderedElectronics and Inkplate 6 SS panel by SolderedElectronics.

The SN74LVC1G34DBV in open source designs

The gallery holds 19 open source boards using the SN74LVC1G34DBV from 9 GitHub repositories; a typical one measures about 144.4 × 107.8 mm and carries around 242 components.

89% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Zerowriter Inkplate 5 Gen2 by zerowriter.

Microcontrollers on boards using the SN74LVC1G34DBV

What boards using the SN74LVC1G34DBV are built for

SN74LVC1G34DBV: common questions

Where can I find a SN74LVC1G34DBV reference design?

Each of the 19 boards on this page is a real design using the SN74LVC1G34DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the SN74LVC1G34DBV A pin?

The A pin has a series resistor on 6 of 9 designs, most often 330 Ω (then 47 Ω). Counted from the KiCad layouts of 9 open source designs using the SN74LVC1G34DBV.

How is the SN74LVC1G34DBV VCC pin connected?

The VCC pin has a capacitor to GND on 6 of 9 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the SN74LVC1G34DBV.

What parts are used alongside the SN74LVC1G34DBV?

The CH340C, ESP32-WROVER, PCAL6416AHF,128, PCF85063A and TPS3840PL27DBVR appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC1G34DBV use?

Most are built on ESP32 (19).

How big is a typical board using the SN74LVC1G34DBV?

The median is 144.4 × 107.8 mm, and 89% are two-layer designs.

What is the most popular open source board using the SN74LVC1G34DBV?

By GitHub stars, Zerowriter Inkplate 5 Gen2 by zerowriter, with 46 stars.

Can I simulate one of these boards using the SN74LVC1G34DBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part