TiltBox
Tom-Michiels·TiltBox·hardware/voice-a/pcb/TiltBox-Voice-A.kicad_pcb
About the TiltBox PCB
TiltBox is an open source ESP32 PCB design by Tom-Michiels, published on GitHub. It is a 4-layer board measuring 78 × 78 mm, with 136 components from 33 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the BQ25185DLHR, TPS63031DSKR, TPS61023DRLR, TPS2553DBVR-1 and SN74LVC2T45DCUR. By type, the board carries 65 diodes, 28 resistors, 26 capacitors, 9 ICs, 3 switches and 2 connectors.
It belongs with the displays & leds, power & battery and retro computing designs in this gallery.
From the project
A handheld retro game console with tilt controls, featuring 9 games on an 8x8 LED matrix. Designed at maakleerplek
Publication snapshot: 26 October 2026. Electronics A.3, enclosure A.4, manufacturing package A.5. Firmware Voice B runs on this same board.
The combined DXF is an alternative layout, not an additional set of parts. Files in mechanical/reference/ are original inputs for the generation scripts, not the Voice parts to print. Units are millimetres. Measure actual sheet thickness and calibrate laser kerf before cutting the final parts.
Main components on the TiltBox
TiltBox bill of materials (BOM)
136 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1U-N16R8 | ESP32-S3-WROOM-1U | U1 |
| 1 | BQ25185DLHR | Texas_DLH0010A_WSON-10-1EP_2.2x2mm_P0.4mm_EP0.9x1.5mm | U2 |
| 1 | TPS63031DSKR | WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm | U3 |
| 1 | TPS61023DRLR | SOT-563 | U4 |
| 1 | TPS2553DBVR-1 | SOT-23-6 | U5 |
| 1 | SN74LVC2T45DCUR | VSSOP-8_2.3x2mm_P0.5mm | U6 |
| 1 | LSM6DS3TR-C | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U7 |
| 1 | ICS-43434 | InvenSense_ICS-43434-6_3.5x2.65mm | U8 |
| 1 | TPS22918DBVR | SOT-23-6 | U9 |
| 1 | TYPE-C 16PIN 2MD(073) | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1 |
| 1 | S2B-PH-SM4-TB(LF)(SN) | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | TS-1101VS-C-A-A | KEY-SMD_TS-1101VS-C-A-A | SW1 |
| 2 | TS-1187A-B-A-B | SW_Push_1P1T_XKB_TS-1187A | SW2, SW3 |
| 1 | SDNT1608X103F3435FTF | R_0603_1608Metric | TH1 |
| 64 | WS2812B-B/T (V5) | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8 +56 |
| 1 | USBLC6-2SC6 | SOT-23-6 | D65 |
| 1 | FNR4018S1R5MT | L_Changjiang_FNR4018S | L1 |
| 1 | FNR4018S1R0MT | L_Changjiang_FNR4018S | L2 |
| 8 | 1u | C_0603_1608Metric | C65, C66, C68, C77, C82, C87, C88, C89 |
| 9 | 22u | C_0805_2012Metric | C67, C69, C71, C72, C73, C74, C75, C76 +1 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | 100n | C_0402_1005Metric | C70, C78, C79, C81, C83, C84, C85, C86 +1 |
| 2 | 5k1 | R_0402_1005Metric | R1, R2 |
| 2 | 22 | R_0402_1005Metric | R3, R4 |
| 1 | 18k | R_0402_1005Metric | R5 |
| 1 | 1k | R_0402_1005Metric | R6 |
| 5 | 10k | R_0402_1005Metric | R7, R8, R14, R17, R18 |
| 1 | 732k | R_0402_1005Metric | R9 |
| 9 | 100k | R_0402_1005Metric | R10, R11, R13, R16, R19, R22, R26, R27 +1 |
| 1 | 49k9 | R_0402_1005Metric | R12 |
| 1 | 33 | R_0402_1005Metric | R15 |
| 2 | 1M | R_0402_1005Metric | R20, R21 |
| 1 | 150k | R_0402_1005Metric | R23 |
| 2 | 4k7 | R_0402_1005Metric | R24, R25 |
TiltBox design files
The KiCad project lives in the Tom-Michiels/TiltBox repository on GitHub; these links point at the commit this page was built from.
TiltBox: common questions
What microcontroller does the TiltBox use?
The TiltBox is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.
How big is the TiltBox PCB?
The TiltBox measures 78 × 78 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the TiltBox?
136 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TiltBox design files?
From the Tom-Michiels/TiltBox repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TiltBox design in my own project?
The repository has no license, so all rights stay with Tom-Michiels. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TiltBox without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k