K30 SBC
transistorfet·computie·hardware/k30-SBC/k30-SBC.kicad_pcb
About the K30 SBC PCB
K30 SBC is an open source PCB design by transistorfet, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 160 × 100 mm, with 87 components from 56 distinct parts.
Other key parts include the MC68030FE, 74HC14, 74HC05, 74HC139 and 4072. By type, the board carries 20 capacitors, 17 ICs, 14 resistors, 9 connectors, 8 jumpers and 8 test points.
It belongs with the retro computing designs in this gallery.
From the project
A collection of 68k computer projects, including a unix-like operating system written in C that runs on them

Main components on the K30 SBC
K30 SBC bill of materials (BOM)
87 components, 56 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MC68030FE | PQFP-132_24x24mm_P0.635mm | U1 |
| 1 | 74HC14 | TSSOP-14_4.4x5mm_P0.65mm | U2 |
| 1 | 74HC05 | TSSOP-14_4.4x5mm_P0.65mm | U3 |
| 1 | 74HC139 | TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | 4072 | TSSOP-14_4.4x5mm_P0.65mm | U5 |
| 1 | 74HC20 | TSSOP-14_4.4x5mm_P0.65mm | U6 |
| 1 | 74HC32 | TSSOP-14_4.4x5mm_P0.65mm | U7 |
| 1 | 74HC08 | TSSOP-14_4.4x5mm_P0.65mm | U8 |
| 2 | 74HC253 | SSOP-16_5.3x6.2mm_P0.65mm | U9, U10 |
| 1 | 74HC138 | TSSOP-16_4.4x5mm_P0.65mm | U11 |
| 1 | 74HC393 | TSSOP-14_4.4x5mm_P0.65mm | U12 |
| 1 | MC68681 | PLCC-44_THT-Socket | U13 |
| 2 | AS6C8016 | TSOP-II-44_10.16x18.41mm_P0.8mm | U14, U15 |
| 1 | AM29F040 | PLCC-32_THT-Socket | U16 |
| 1 | 74LVC1G32 | SOT-353_SC-70-5_Handsoldering | U17 |
| 2 | Crystal | Crystal_HC49-4H_Vertical | Y1, Y2 |
| 1 | CompactFlash | CF-Card_3M_N7E50-Q516RB-40 | J1 |
| 1 | Serial1 | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Serial2 | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | ADBUS-EXP | PinHeader_2x15_P2.54mm_Vertical | J4 |
Show 36 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADBUS | PinHeader_2x20_P2.54mm_Vertical | J5 |
| 1 | SIGBUS | PinHeader_2x20_P2.54mm_Vertical | J6 |
| 3 | POWER | PinHeader_1x02_P2.54mm_Vertical | J7, J8, J9 |
| 1 | ROMJMP | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | IRQ | PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | ~{IACK} | PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 2 | POWER | PinHeader_1x02_P2.54mm_Vertical | JP4, JP5 |
| 1 | ENABLE | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6 |
| 1 | PULLUP | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP7 |
| 1 | ENABLE CFAK | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP8 |
| 1 | ~{RESET} | SW_PUSH_6mm | SW1 |
| 1 | SW_DIP_x06 | DIP-12_W7.62mm_LongPads | SW2 |
| 1 | IP2 | SW_PUSH_6mm | SW3 |
| 1 | IP3 | SW_PUSH_6mm | SW4 |
| 1 | IPEND | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP1 |
| 1 | REFILL | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP2 |
| 1 | STATUS | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP3 |
| 1 | ~{DSACK-EXT} | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP4 |
| 1 | IP3 | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP5 |
| 1 | IP2 | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP6 |
| 1 | RMC | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP7 |
| 1 | ~{DSACK-SEL} | TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | TP8 |
| 1 | RUN | LED_D5.0mm | D1 |
| 1 | OP5 | LED_D5.0mm | D2 |
| 1 | OP7 | LED_D5.0mm | D3 |
| 1 | OP4 | LED_D5.0mm | D4 |
| 1 | OP6 | LED_D5.0mm | D5 |
| 1 | 0.47uF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C1 |
| 1 | 15pF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C2 |
| 1 | 5pF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C3 |
| 16 | 0.1uF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C4, C5, C6, C7, C9, C10, C11, C12 +8 |
| 1 | 470uF | CP_Radial_D8.0mm_P5.00mm | C8 |
| 6 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R7, R8, R10, R11 |
| 4 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R6, R9, R12 |
| 2 | 5.1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R5 |
| 2 | 10k | R_Array_SIP9 | RN1, RN2 |
K30 SBC design files
The KiCad project lives in the transistorfet/computie repository on GitHub; these links point at the commit this page was built from.
K30 SBC: common questions
How big is the K30 SBC PCB?
The K30 SBC measures 160 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the K30 SBC?
87 components, from 56 distinct parts. The full bill of materials is listed on this page.
Where can I download the K30 SBC design files?
From the transistorfet/computie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the K30 SBC design in my own project?
Yes, under the terms of its GPL-3.0 license, which transistorfet chose for the repository.
More boards in computie
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k