17 open source boards using the 74HC05

Real designs built with the 74HC05, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

17 boardsClear filters|Most starred

How designs wire the 74HC05

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74HC05 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 2 has a pull-up to 5V on 5 of 8 designs, most often 1 kΩ (then 10 kΩ).
  • The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF.
  • Pin 4 has a pull-up to 5V on 4 of 8 designs, most often 10 kΩ (then 4.7 kΩ).
  • Pin 10 has a pull-up to VCC on 4 of 8 designs, most often 10 kΩ (then 4.7 kΩ).
Pin 2Connected to: A connector 63%, 8242KBD 25%
  • Pull-up to 5V on 63% · 1 kΩ (2), 10 kΩ (2), 4.7 kΩ (1)
Pin 4Connected to: A connector 63%, MC68681 25%, 8242KBD 25%
  • Pull-up to 5V on 50% · 10 kΩ (3), 4.7 kΩ (1)
GNDpin 7Connected to: GND 100%
Pin 10Connected to: A connector 25%, 8242KBD 25% · not connected 38%
  • Pull-up to VCC on 50% · 10 kΩ (3), 4.7 kΩ (1)
Pin 12Connected to: 8242KBD 25% · not connected 38%
  • Pull-up to VCC on 50% · 10 kΩ (3), 4.7 kΩ (1)
VCCpin 14Connected to: 5V 100%
  • Decoupling capacitor on 63% · 100 nF (3)

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 68k-SMT by transistorfet, Unijoysticle 2 A500 by ricardoquesada, Mb386sx rc2016 by skiselev and Io by jtsiomb.

The 74HC05 in open source designs

The gallery holds 17 open source boards using the 74HC05 from 8 GitHub repositories; a typical one measures about 149 × 100 mm and carries around 54 components.

59% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.

The most starred is K30 SBC by transistorfet.

Microcontrollers on boards using the 74HC05

74HC05: common questions

Where can I find a 74HC05 reference design?

Each of the 17 boards on this page is a real design using the 74HC05. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the 74HC05 pin 2?

Pin 2 has a pull-up to 5V on 5 of 8 designs, most often 1 kΩ (then 10 kΩ). Counted from the KiCad layouts of 8 open source designs using the 74HC05.

What decoupling capacitors do designs use on the 74HC05 VCC pin?

The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the 74HC05.

What pull-up resistor is used on the 74HC05 pin 4?

Pin 4 has a pull-up to 5V on 4 of 8 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 8 open source designs using the 74HC05.

What parts are used alongside the 74HC05?

The 74HC14, 74HC74, 74HC04, 74HC08 and 74HC139 appear in the most repositories here.

Which microcontrollers do boards using the 74HC05 use?

Most are built on ESP32 (5) and AVR/Arduino (2).

How big is a typical board using the 74HC05?

The median is 149 × 100 mm, and 59% are two-layer designs.

What is the most popular open source board using the 74HC05?

By GitHub stars, K30 SBC by transistorfet, with 69 stars.

Can I simulate one of these boards using the 74HC05 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part