7 open source boards using the 74HC393

Real designs built with the 74HC393, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the 74HC393

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74HC393 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF.
  • The CP pins have a series resistor on 3 of 7 designs, most often 5.1 kΩ (then 47 Ω).
CPpin 1, 13Connected to: A connector 29%
  • Series resistor on 43% · 5.1 kΩ (2), 47 Ω (1)
GNDpin 7Connected to: GND 100%
VCCpin 14Connected to: 5V 86%
  • Decoupling capacitor on 86% · 100 nF (11)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include K30 SBC by transistorfet, MemBird - Woodcock by transistorfet, Io by ddanila and CPU09US4 by roberto314.

The 74HC393 in open source designs

The gallery holds 7 open source boards using the 74HC393 from 7 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 87 components.

71% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is K30 SBC by transistorfet.

Microcontrollers on boards using the 74HC393

What boards using the 74HC393 are built for

74HC393: common questions

Where can I find a 74HC393 reference design?

Each of the 7 boards on this page is a real design using the 74HC393. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HC393 VCC pin?

The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the 74HC393.

What resistor goes on the 74HC393 CP pin?

The CP pins have a series resistor on 3 of 7 designs, most often 5.1 kΩ (then 47 Ω). Counted from the KiCad layouts of 7 open source designs using the 74HC393.

What parts are used alongside the 74HC393?

The 74HC138, 74HC32, 74HC08, 74HC139 and 74HC14 appear in the most repositories here.

Which microcontrollers do boards using the 74HC393 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the 74HC393?

The median is 160 × 100 mm, and 71% are two-layer designs.

What is the most popular open source board using the 74HC393?

By GitHub stars, K30 SBC by transistorfet, with 69 stars.

Can I simulate one of these boards using the 74HC393 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part