6 open source boards using the 4072
Real designs built with the 4072, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
K30 SBC
transistorfet
160 × 100 mm87 parts4LGPL-3.069Pong
PlummersSoftwareLLC
142.2 × 124.5 mm26 parts2LGPL-3.012MM58167-ISA-RTC
jensma-de
89.3 × 50 mm29 parts2LNo license8RP2040/RP2350
All in one smc
nojan1
161.1 × 82.9 mm146 parts4LNo license0Display
JAndersM
112.4 × 78.7 mm26 parts2LGPL-3.00BSPD
formulaslug
85 × 65 mm65 parts2LNo license5
How designs wire the 4072
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 4072 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 6 is left unconnected on 6 of 6 designs.
- Pin 8 is left unconnected on 6 of 6 designs.
- The VDD pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 47 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 6 | Connected to: Not connected 100% | — |
| VSSpin 7 | Connected to: GND 100% | — |
| Pin 8 | Connected to: Not connected 100% | — |
| VDDpin 14 | Connected to: VCC 100% |
|
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include K30 SBC by transistorfet, PongPCB by PlummersSoftwareLLC, MM58167-ISA-RTC by jensma-de and BSPD by formulaslug.
The 4072 in open source designs
The gallery holds 6 open source boards using the 4072 from 6 GitHub repositories; a typical one measures about 127.3 × 80.8 mm and carries around 47 components.
67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is K30 SBC by transistorfet.
Parts used alongside the 4072
Microcontrollers on boards using the 4072
What boards using the 4072 are built for
4072: common questions
Where can I find a 4072 reference design?
Each of the 6 boards on this page is a real design using the 4072. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 4072 pin 6 connected?
Pin 6 is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 4072.
How is the 4072 pin 8 connected?
Pin 8 is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 4072.
What decoupling capacitors do designs use on the 4072 VDD pin?
The VDD pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 47 nF). Counted from the KiCad layouts of 6 open source designs using the 4072.
Which microcontrollers do boards using the 4072 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the 4072?
The median is 127.3 × 80.8 mm, and 67% are two-layer designs.
What is the most popular open source board using the 4072?
By GitHub stars, K30 SBC by transistorfet, with 69 stars.
Can I simulate one of these boards using the 4072 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.