8 open source boards using the AM29F040
Real designs built with the AM29F040, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
8bit computer
vascofazza
297.2 × 180.3 mm327 parts2LMIT314K30 SBC
transistorfet
160 × 100 mm87 parts4LGPL-3.069Robomow city120 reveng
martonmiklos
45.4 × 22.8 mm12 parts2LNo license6AVR/Arduino
8bit computer
saktheeswaranswan
297.2 × 180.3 mm327 parts2LMIT068k-SBC
transistorfet
154.9 × 139.7 mm72 parts2LGPL-3.069AVR/Arduino
Programming interface
saktheeswaranswan
53.3 × 48.3 mm12 parts2LMIT068k-SMT
transistorfet
106.7 × 139.7 mm64 parts2LGPL-3.069K30p-VME
transistorfet
160 × 100 mm107 parts4LMIT17
How designs wire the AM29F040
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AM29F040 connects to, and the resistors, capacitors and other passives placed on it.
- The Q0 pin has a series resistor on 2 of 5 designs, most often 1 kΩ.
- The Q1 pin has a series resistor on 2 of 5 designs, most often 1 kΩ.
- The Q2 pin has a series resistor on 2 of 5 designs, most often 1 kΩ.
- The Q3 pin has a series resistor on 2 of 5 designs, most often 1 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Q0pin 13 | Connected to: 74HCT32 40% |
|
| Q1pin 14 | Connected to: 74HCT32 40% |
|
| Q2pin 15 | Connected to: 74HCT238 40% |
|
| GNDpin 16 | Connected to: GND 100% | — |
| Q3pin 17 | Connected to: 74HCT238 40% |
|
| Q4pin 18 | Connected to: 74HCT238 40% |
|
| Q6pin 20 | Connected to: 74HCT32 40% |
|
| Q7pin 21 | Connected to: 74HCT32 40% |
|
| OEpin 24 | Connected to: 74HCT32 40%, AM29F040 40%, the microcontroller 40% |
|
| VCCpin 32 | Connected to: VCC 100% |
|
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, 68k-SMT by transistorfet, K30p-VME by transistorfet and Robomow city120 reveng by martonmiklos.
The AM29F040 in open source designs
The gallery holds 8 open source boards using the AM29F040 from 5 GitHub repositories; a typical one measures about 157.5 × 119.8 mm and carries around 80 components.
75% are two-layer designs, the rest use four layers or more, and 88% carry an open source license.
The most starred is 8bit computer by vascofazza.
Parts used alongside the AM29F040
Microcontrollers on boards using the AM29F040
What boards using the AM29F040 are built for
AM29F040: common questions
Where can I find a AM29F040 reference design?
Each of the 8 boards on this page is a real design using the AM29F040. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the AM29F040 Q0 pin?
The Q0 pin has a series resistor on 2 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the AM29F040.
What resistor goes on the AM29F040 Q1 pin?
The Q1 pin has a series resistor on 2 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the AM29F040.
What resistor goes on the AM29F040 Q2 pin?
The Q2 pin has a series resistor on 2 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the AM29F040.
What parts are used alongside the AM29F040?
The 28C64, 74HC05, 74HC14, 74HCT00 and 74HCT02 appear in the most repositories here.
Which microcontrollers do boards using the AM29F040 use?
Most are built on AVR/Arduino (3).
How big is a typical board using the AM29F040?
The median is 157.5 × 119.8 mm, and 75% are two-layer designs.
What is the most popular open source board using the AM29F040?
By GitHub stars, 8bit computer by vascofazza, with 314 stars.
Can I simulate one of these boards using the AM29F040 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.