Weather ESP32

computergeek1507·KiCad_Designs·Weather_ESP32/Weather_ESP32.kicad_pcb

Weather ESP32 PCB layout, top view — open source ESP32 board by computergeek1507

About the Weather ESP32 PCB

Weather ESP32 is an open source ESP32 PCB design by computergeek1507, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 63.4 × 85 mm, with 16 components from 16 distinct parts.

Its main chip is the WT32_ETH01, from the ESP32 family. Other key parts include the L7805. By type, the board carries 8 connectors, 3 resistors, 2 ICs, 2 capacitors and 1 diode.

From the project

KiCad PCB Designs

This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.

You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions

Weather ESP32, from the project README
From the project README

Main components on the Weather ESP32

Weather ESP32 bill of materials (BOM)

16 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
WT32_ETH01
U1
1
L7805
U2
1
Pwr In
J1
1
12V
J2
1
Rain 3 Adv
J3
1
WIND
J4
1
RAIN 1
J5
1
Rain 2 Serial
J6
1
BME280
J7
1
DS18B20
J8
1
150080RS75000
LED
D1
1
100UF
100uF
C1
1
10UF
10uF
C2
1
10K
R1
1
RMCF0603FT220R
220
R2
1
4.7K
R3

Weather ESP32 design files

The KiCad project lives in the computergeek1507/KiCad_Designs repository on GitHub; these links point at the commit this page was built from.

Weather ESP32: common questions

What microcontroller does the Weather ESP32 use?

The Weather ESP32 is built around the WT32_ETH01, from the ESP32 family.

How big is the Weather ESP32 PCB?

The Weather ESP32 measures 63.4 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Weather ESP32?

16 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Weather ESP32 design files?

From the computergeek1507/KiCad_Designs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Weather ESP32 design in my own project?

Yes, under the terms of its CERN-OHL-1.2 license, which computergeek1507 chose for the repository.

Can I test firmware for the Weather ESP32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in KiCad_Designs

Similar boards