NX-ISD

Ghost3379·NX-ISD·ISD-PCB/NX-ISD/NX-ISD.kicad_pcb

NX-ISD PCB layout, top view — open source ESP32 board by Ghost3379

About the NX-ISD PCB

NX-ISD is an open source ESP32 PCB design by Ghost3379, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 77 × 48.6 mm, with 108 components from 50 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the RT9193-18GB, USBLC6-2P6, TLV62568DBV, RT9193-28GB and BQ25170DSGR. By type, the board carries 31 capacitors, 30 resistors, 16 ICs, 16 LEDs, 4 transistors and 3 connectors.

It belongs with the wearables, power & battery and sensors designs in this gallery.

From the project

A more sophisticated version of the Artemis Watch by Circuitmess.

This directory contains the schematic design, PCB layout, fabrication outputs, and Bill of Materials (BOM) for the NX-ISD (Intelligent Sensor Device) wearable carrier board.

Comprehensive current consumption analysis across operating states, accounting for conversion efficiencies and real-world loads:

Buck Current from Battery: $\approx 310\text{ to }445\,\text{mA}$ (during Wi-Fi TX). Matrix Current from Battery: $\approx 245\,\text{mA}$ (100% white stress test). LDOs from Battery (+1V8 and +2V8): $\approx 15\text{ to }25\,\text{mA}$. Total Battery Current at 100% Synthetic Stress Test…

NX-ISD, from the project README
From the project README

Main components on the NX-ISD

NX-ISD bill of materials (BOM)

108 components, 50 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RT9193-18GB
U1
1
USBLC6-2P6
U2
1
TLV62568DBV
U3
1
RT9193-28GB
U4
1
BQ25170DSGR
U5
1
MAX17048G_T10
U6
1
BME690
U7
1
MAX30102
U8
1
PCA9306
U9
1
OPT3001DNPR
U10
1
BNO085
U11
1
RV-3028-C7
U12
1
ESP32-S3-WROOM-1-N16R8
U13
1
ZDSD02GLGEAG
U14
1
TXB0106RGY
U15
1
TM-2025A
U16
1
BC847W
Q1
1
AO3401A
Q2
2
AO3400A
Q3, Q4
1
32.768 kHz
Y1
Show 30 more
QtyPartRefs
1
UJ20-C-H-G-SMT-1-P16-TR
J1
1
1-2328702-0
J2
1
S2B-PH-SM4-TB
P1
1
SMD-8503-3627-16Ω
B1
1
TS-1101VS-C-A-A
S1
1
NCU15XH103D60RC
10k NTC
TH1
16
XL-1010RGBC-WS2812B
G1, G2, G3, G4, G5, G6, G7, G8 +8
1
NRVB230LSFT1G
D1
1
ORANGE
D2
1
1N4148WT
D3
1
SRN2510BTA-2R2M
2.2u
L1
8
1u
C1, C4, C5, C8, C9, C10, C16, C26
2
4.7u
C2, C32
2
10n
C3, C7
4
10u
C6, C11, C24, C33
13
100n
C12, C13, C17, C18, C19, C20, C21, C25 +5
2
22p
C22, C23
2
5.1k
R1, R2
1
453k
R3
2
100k
R4, R10
1
27k
R5
1
499
R6
2
1k
R7, R9
11
10k
R8, R13, R14, R16, R17, R18, R19, R24 +3
2
4.7k
R11, R12
1
200k
R15
3
51.1k
R20, R21, R22
2
220
R23, R25
1
10
R27
1
YC248-JR-074K7L
RN1

NX-ISD design files

The KiCad project lives in the Ghost3379/NX-ISD repository on GitHub; these links point at the commit this page was built from.

NX-ISD: common questions

What microcontroller does the NX-ISD use?

The NX-ISD is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.

How big is the NX-ISD PCB?

The NX-ISD measures 77 × 48.6 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the NX-ISD?

108 components, from 50 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the NX-ISD design files?

From the Ghost3379/NX-ISD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the NX-ISD design in my own project?

Yes, under the terms of its GPL-3.0 license, which Ghost3379 chose for the repository.

Can I test firmware for the NX-ISD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards