6 open source boards using the OPT3001DNPR
Real designs built with the OPT3001DNPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
NX-ISD
Ghost3379
77 × 48.6 mm108 parts4LGPL-3.02STM32
Iot risk logger stm32l4
polesskiy-dev
55 × 45 mm42 parts2LNo license2RP2040/RP2350
MSCKee
Creative-Difficulty
213.7 × 140.6 mm140 parts4LNo license1STM32
X-Watch
Han-ZenX
36 × 36 mm118 parts2LMIT0Stackflex feature air qual
M41T3
40 × 40 mm37 parts2LNo license0ESP32
Roomsensor
marmbrus
70 × 82 mm97 parts4LNo license0
How designs wire the OPT3001DNPR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the OPT3001DNPR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_1 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF.
- The SCL_4 pin has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ (then 5.1 kΩ).
- The SDA_6 pin has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ (then 5.1 kΩ).
- The EXP_7 pin is tied to GND on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD_1pin 1 | Connected to: 3.3V 100% |
|
| ADDR_2pin 2 | Connected to: GND 67% · VDD 33% |
|
| GND_3pin 3 | Connected to: GND 100% | — |
| SCL_4pin 4 | Connected to: The microcontroller 50% |
|
| INT_5pin 5 | Connected to: The microcontroller 33% · not connected 17% |
|
| SDA_6pin 6 | Connected to: The microcontroller 50% |
|
| EXP_7pin 7 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NX-ISD by Ghost3379, Iot risk logger stm32l4 by polesskiy-dev, MSCKee by Creative-Difficulty and X-Watch by Han-ZenX.
The OPT3001DNPR in open source designs
The gallery holds 6 open source boards using the OPT3001DNPR from 6 GitHub repositories; a typical one measures about 62.5 × 46.8 mm and carries around 103 components.
50% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is NX-ISD by Ghost3379.
Parts used alongside the OPT3001DNPR
Microcontrollers on boards using the OPT3001DNPR
What boards using the OPT3001DNPR are built for
OPT3001DNPR: common questions
Where can I find a OPT3001DNPR reference design?
Each of the 6 boards on this page is a real design using the OPT3001DNPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the OPT3001DNPR VDD_1 pin?
The VDD_1 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the OPT3001DNPR.
What pull-up resistor is used on the OPT3001DNPR SCL_4 pin?
The SCL_4 pin has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 6 open source designs using the OPT3001DNPR.
What pull-up resistor is used on the OPT3001DNPR SDA_6 pin?
The SDA_6 pin has a pull-up to 3.3V on 5 of 6 designs, most often 10 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 6 open source designs using the OPT3001DNPR.
Which microcontrollers do boards using the OPT3001DNPR use?
Most are built on ESP32 (2), STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the OPT3001DNPR?
The median is 62.5 × 46.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the OPT3001DNPR?
By GitHub stars, NX-ISD by Ghost3379, with 2 stars.
Can I simulate one of these boards using the OPT3001DNPR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.