5 open source boards using the BQ25170DSGR
Real designs built with the BQ25170DSGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Elixir hw
golioth
71.5 × 71.5 mm218 parts4LCERN-OHL-P-2.036ESP8266
ESP8266Tetris
arraym
60 × 120 mm224 parts2LNo license2ESP32
NX-ISD
Ghost3379
77 × 48.6 mm108 parts4LGPL-3.02STM32
Open motion light
ademuri
80 × 80 mm95 parts4LApache-2.02Nordic nRF
Kugel keyboard
leschi4banane
244 × 85.4 mm139 parts2LNo license0
How designs wire the BQ25170DSGR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the BQ25170DSGR connects to, and the resistors, capacitors and other passives placed on it.
- The ISET pin has a resistor to GND on 5 of 5 designs, most often 1 kΩ (then 620 Ω).
- The TS pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ.
- The VSET pin has a resistor to GND on 5 of 5 designs, most often 27 kΩ (then 82 kΩ).
- The IN pin is tied to 5V on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 100% | — |
| ISETpin 2 | Connected to: Signal 100% |
|
| TSpin 3 | Connected to: Signal 100% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| STATpin 5 | Connected to: Signal 80% · not connected 20% |
|
| PGpin 6 | Connected to: Signal 80% · not connected 20% |
|
| VSETpin 7 | Connected to: Signal 100% |
|
| OUTpin 8 | Connected to: VBAT 80% · a signal 20% | — |
| EPpin 9 | Connected to: GND 80% · not connected 20% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Elixir hw by golioth, Open motion light by ademuri, ESP8266Tetris by arraym and NX-ISD by Ghost3379.
The BQ25170DSGR in open source designs
The gallery holds 5 open source boards using the BQ25170DSGR from 5 GitHub repositories; a typical one measures about 77 × 80 mm and carries around 139 components.
60% use four copper layers or more, and 60% carry an open source license.
The most starred is Elixir hw by golioth.
Microcontrollers on boards using the BQ25170DSGR
What boards using the BQ25170DSGR are built for
BQ25170DSGR: common questions
Where can I find a BQ25170DSGR reference design?
Each of the 5 boards on this page is a real design using the BQ25170DSGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the BQ25170DSGR ISET pin?
The ISET pin has a resistor to GND on 5 of 5 designs, most often 1 kΩ (then 620 Ω). Counted from the KiCad layouts of 5 open source designs using the BQ25170DSGR.
What resistor goes on the BQ25170DSGR TS pin?
The TS pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the BQ25170DSGR.
What resistor goes on the BQ25170DSGR VSET pin?
The VSET pin has a resistor to GND on 5 of 5 designs, most often 27 kΩ (then 82 kΩ). Counted from the KiCad layouts of 5 open source designs using the BQ25170DSGR.
Which microcontrollers do boards using the BQ25170DSGR use?
Most are built on ESP32 (2), ESP8266 (1), Nordic nRF (1) and STM32 (1).
How big is a typical board using the BQ25170DSGR?
The median is 77 × 80 mm, and 40% are two-layer designs.
What is the most popular open source board using the BQ25170DSGR?
By GitHub stars, Elixir hw by golioth, with 36 stars.
Can I simulate one of these boards using the BQ25170DSGR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.